Finally, the program flow chart of one-step forming is given.
最后给出了一步成形模拟算法的程序流程图。
In the article the simply and reliable testing-circuit is desired and analysed by the program flow chart.
设计了简单可靠的检测电路，并用程序流程图加以分析。
On this basis a two-three beat stepper motor control circuit of the hardware interface, the program flow chart and assembler.
在此基础上提出了双三拍步进电机程序控制的硬件接口电路、程序流程图和汇编程序。
On the basis of the simulation, we propose DS-TCNN-TSP algorithm and design the program flow chart including the searching and statistical process.
在此基础上，进一步提出了DS-TCNN-TSP算法，并对整个搜索过程以及统计过程给出了完整的程序流程图。
In this paper, we introduce a humidity controller using wireless data transmission system with multi-probe, and present the unit circuit and the program flow chart.
本文介绍了一种多探头输入利用无线数据进行传输的湿度控制仪，给出了单元电路图和程序流程图。
This paper analyses convolution encoding method and spreading spectrum method and discusses emphatically its implementation and demonstrates the program flow chart.
论文分析了卷积编码方法和扩展频谱方法，并详细论述了编码和扩频的软件实现方法，给出了程序的流程图和相关程序。
By this method, the function of the instrument is extended and can satisfy the requirement of the surface roughness national standard. The program flow chart is given.
从而，扩大了只用于测量单参数的表面粗糙度检查仪的使用功能，以满足表面粗糙度国家标准所规定的评定参数的要求。
Several software anti-interference measures were taken, such as WDT, redundancy directive, digital filtering. The program flow chart and some of the key program were also showed.
在程序设计中采取几种常用的软件抗干扰措施，如监视定时器、冗余指令、数字滤波，给出了程序流程图及部分关键程序。
It introduces the program flow chart, data store format, reading and writing method in detail, and also points out some questions that need to be paid attention to in the programming.
详细介绍了程序流程图、数据存储格式和读取方法，并指出了实际编程中要注意的一些问题。
This paper expounds the design idea and method of the applied picture-in-picture software used in "Fujian Hitachi" Model DTV-2051 digital TV. It shows the program flow chart in detail.
本文论述了在“福日”牌DTV-2051型数字电视机上实际应用的画中画软件的设计思想和方法，并给出了详细的程序流程框图。
Emphasis is put on the structural flow-chart of the program and its main functions.
本文重点介绍了实用程序的结构流程图及其所完成的主要功能。
This paper detailedly introduces the whole design scheme of the system, the circuit on interface module and 89c51, the method of the software design and program flow chart.
详细阐述了系统的总体设计方案，给出了界面模块与89c51接口电路，最后介绍了软件设计方法及程序流程图。
This paper introduces a handwritten digit recognition system based on TMS320VC5402. The work principle is presented and the block diagram of hardware and program flow chart are given .
介绍了基于TMS320VC5402的手写数字识别系统和该系统的基本原理，给出了它的硬件原理图和软件设计程序框图。
The main data structure used in the program is given, By means of program flow chart, the program is described in detail.
对程序中用到的主要数据结构及作用做了说明，并借助流程图详细介绍了行编辑程序各功能的实现过程。
The detection method of the synchronization and the flow chart of program are given.
给出了装置的硬件电路原理及实现检测和自动并列过程的程序流程。
In the software aspect, it curtly introduces flow chart of main program and the programming method of all ports of circuit.
在软件方面，介绍了主程序的流程图及各部分电路的编程方法。
To satisfy real-time processing and features of AO board, we made a particular argumentation in software design, the flow chart of the program has been listed.
同时根据实时性的要求及模拟量输出板的功能特点，对其软件设计做了详细的讨论，并给出了程序流程图。
The details of the method and the flow chart of the computer program are given.
文中给出该数值方法的细节及计算程序框图。
The mathematical morphological filtering technique based upon frame difference method has been push forward and the basic program flow chart for this algorithm is also set forth.
在此基础上选择数学形态学滤波方法，设计了基于帧间差分法的数学形态学图像滤波处理算法，并设计了算法的程序流程。
The arithmetic of linear interpolation is analysed, the interpolation flow chart and part of the VB program codes are provided, and the simulation example is presented.
分析了全象限逐点比较法直线插补的算法，给出了插补流程图，并提供了部分VB程序代码，并给出了仿真实例。
Using this criterion we can now write the program corresponding to our flow chart.
应用这条准则，现在我们就可编写同这个程序框图相适应的程序了。
The emphases are programming language design, control software composition, main function modules of control software, program flow chart of the controlling module.
重点介绍了测控软件的编程语言设计、测控软件构成、测控软件主要功能模块、测控模块程序流程图。
This article describes the design of its hardware and shows the main program flow chart.
本文介绍了其硬件电路的设计，并给出了主程序的流程图。
This paper introduces the construction and its configuration of timer device based on PLC, and gives the program flow - chart.
介绍了一种由可编程控制器构成的报时器电路及设置，并给出了程序流程图。
Based on the research of embedded assembly program flow chart automatic building, the breakpoint setting and checking mechanism, virtual instrumentation mechanism based on the PC values are proposed.
该文在汇编嵌入式软件程序流程图自动生成的研究基础上，提出了以PC值为基准条件的断点设置、测机制以及虚拟插桩机制。
Furthermore, this paper gives detailed discussions on the control system, hardware configuration and software design, and provides the PLC modular diagram and the program design flow chart.
对系统的控制功能、硬件配置和软件设计进行了讨论，提供了PLC模块配置图，给出了程序设计流程。
The FFT phase measuring algorithm is realized on TMS320VC5402 digital signal processor and the flow chart of phase measuring program is introduced.
以TMS320VC5402数字信号处理器实现FFT检相算法，给出检相程序的实现流程。
The method, formulas and flow chart of computing program GBHST for reinforced concrete slab design are introduced in detail.
本文详细介绍了钢筋混凝土盖板涵设计计算程序gbhst的方法、公式和流程图。
Finally, the thesis designs software system, gives the partition of software functional modules and the flow chart of main program.
最后，对软件系统进行设计，完成了功能模块划分并给出了主程序流程图。
On the software design, modularized program has been used, the procedure flow chart is introduced, and explanation on digital processing is given.
软件设计方案采用模块化的设计思想，给出了主程序的流程图及数据处理的相关说明。
应用推荐