The thermal expansion coefficient DTA and electrical properties were also investigated.
性能测试包括热膨胀系数、差热曲线和电性能等。
The results show that the thinner crystal nano-wire has a larger thermal expansion coefficient.
研究结果表明，纳米晶体线越细，其热膨胀系数越大。
A micromechanical model was proposed to predict the thermal expansion coefficient of composite.
建立了一种细观力学模型用于预报复合材料的有效热膨胀系数。
Solidification; Reciprocating Extrusion; Strengthening Mechanism; Thermal Expansion Coefficient;
合金；快速凝固；往复挤压；强化机制；热膨胀系数；
Thermal expansion is one of the important properties of minerals, and thermal expansion coefficient…
热膨胀是矿物材料的重要物理性质， 热膨胀系数是重要的热力学参数之一。
During the study we tried to lower the thermal expansion coefficient of cordierite by adding additives.
在本研究中，还试图通过添加外加剂来降低堇青石的热膨胀系数。
The calculation method is derived from the temperature dependence of the thermal expansion coefficient.
的计算方法是来自的热膨胀系数的温度依赖性的。
It has the approximate thermal expansion coefficient with VITA95 porcelain system and can form a good bonding.
合金热膨胀系数与VITA瓷达到正相匹配，可形成良好的结合。
In this paper, the test method of the linear thermal expansion coefficient of hardened cement paste is studied.
本文研究了水泥石线性热膨胀系数的测试方法，并针对本试验方法制定了相关的试验制度。
This paper presents a novel structure for in situ determining thermal expansion coefficient of polysilicon thin films.
本文提出了一种新的结构，在原位多晶硅薄膜热膨胀系数的确定。
The thermal expansion coefficient of fluosilicate glass-ceramics is mainly affected by the crystal phases and their amount.
氟硅酸盐微晶玻璃的热膨胀性能主要取决于微晶玻璃的晶相组成及其相对含量。
Two methods are established to predict the thermal expansion coefficient of Unidirectional composite based on micro-mechanics.
基于细观力学方法建立了两种预测单向复合材料的热膨胀系数的方法。
The components of hybrid composites are quite complicated and diverse. Therefore it 's difficult to predict its thermal expansion coefficient.
由于混杂复合材料组分多、结构复杂，因此预测其热膨胀系数难度较大。
The influences of lithia content on the melting temperature, mechanical properties and thermal expansion coefficient of low temperature frit were studied.
本文研究了氧化锂加入量对低温熔块的熔融温度、力学性能、热膨胀系数的影响。
The catalogue of transition-metals, thickness and the thermal expansion coefficient which influence the strength of the bonded places are studied as well.
同时还研究了过渡层金属的种类、厚度及线膨胀系数对接合强度的影响。
The microcracks have certain effects on reducing the average thermal expansion coefficient, nevertheless they decrease the mechanical strength of the ceramics.
微裂纹对降低陶瓷材料的平均膨胀系数有一定作用，但同时又降低了材料的机械强度。
Cast iron is different from cement thermal expansion coefficient, will transform, separate with long hours, over - towing force action descend turn over the turn on.
铸铁与水泥热膨胀系数不同，长时间就会变形、分离，在外力作用下翻开。
The alumina titanate ceramics delivery tube made of the completely novel ingredients has a small thermal expansion coefficient, good thermal stability can meet using needs.
全新配料组成， 所得的钛酸铝陶瓷导液管热膨胀系数小，热稳定性好，满足使用要求。
The thermal mechanical analyzer is used to obtain the dimension change of EMC at different temperatures; And the thermal expansion coefficient of EMC is achieved by using linear fitting.
利用热机械分析仪获得了EMC材料在不同温度时的尺寸变化量，并通过线性拟合得到了EMC材料的热膨胀系数。
If the valve body material can be welded, but very different thermal expansion coefficient, or changes in operating temperature range of a larger thread junction closure weld must be honey.
如果阀体的材料是可以焊接的，但膨胀系数差异很大，或者工作温度的变化幅度范围较大，螺纹连接部必须进行蜜封焊。
A new digital image correlation method (DICM) measurement is utilized to investigate the thermal expansion coefficient of the far-infrared ceramic coated the semiconductor galvanothermy membrane.
本文采用一种新的数字图像相关方法测量带有半导体电热膜的远红外陶瓷热胀系数。
On the assumption that the product of volume thermal expansivity and bulk modulus based on the thermodynamic approximation theory, a new equation is presented for volume thermal expansion coefficient.
根据热力学近似理论，在对体积热膨胀系数和体积弹性模量的乘积进行假设的基础上推导了一个体积热膨胀系数与体积和温度间的关系式。
In addition to good workability, high conductivity and low thermal expansion coefficient, it has excellent mechanical properties, excellent oxidation resistance and excellent thermal shock resistance.
它不但具有非常好的机械加工性能、高导电性和低热膨胀系数，还具有优异的力学性能、抗氧化性能和抗热震性。
The definition and classification of material's thermal expansion coefficient are introduced briefly. The thermal deformation calculation method and error of parts often used in practice are analyzed.
简要介绍了材料热膨胀系数的定义及分类，并对经常使用的零件热变形的计算方法及计算产生的误差进行了分析。
The difference of the value of the real thermal expansion coefficient and the average thermal expansion coefficient, and the difference of thermal expansion among the given steel grades were analyzed.
分析了瞬时线膨胀系数与平均线膨胀系数的差异以及不同钢种间热膨胀的差异性。
By adjusting these two parameters, can be near zero coefficient of thermal expansion.
通过调整这两个参数，可以获得接近零的热膨胀系数。
Designed to complete the composite coefficient of thermal expansion of the calculation and prediction functions.
设计完成对复合材料的热膨胀系数的计算和预测功能。
In contrast with metal and thermoplastic material, which has a higher coefficient of thermal expansion (CTE).
相较于金属和热塑材料，什么材料具有更高的热膨胀系数(CTE) ？
Proceed from different heat coefficient of expansion of two different metals for thermal bimetals with dish shape, the calculation modul was given.
从碟形双金属片的两块不同金属的热膨胀系数出发，设计了计算模型。
Proceed from different heat coefficient of expansion of two different metals for thermal bimetals with dish shape, the calculation modul was given.
从碟形双金属片的两块不同金属的热膨胀系数出发，设计了计算模型。
应用推荐