The cleanliness of molten steel is a key factor for thin slab casting.
洁净钢的生产是薄板坯连铸的关键问题。
Schedule rules for two-strand thin slab casting and rolling were established.
首先建立了两流薄板坯连铸连轧流程生产调度规则库。
It will also foster the further perfection of EAF technology and the ubiquitous use of Thin Slab Casting.
回收再利用也将推动电弧炉技术的进一步完善和薄板坯连铸技术的广泛采用。
By tracer method, the inclusion behavior during FTSC (flexible thin slab casting) thin slab casting was studied.
采用示踪法研究了FTSC薄板坯夹杂物行为。
Results from the analysis provides basis for the system optimization of the thin slab casting and rolling process.
分析结果为薄板坯连铸连轧流程的优化提供了依据。
In this paper, the design and test of the thin slab casting testing unit built in Lanzhou Steel Plant is introduced.
本文介绍建立在兰州钢厂的薄板坯连铸试验机组的设计和试验情况，对机组构成及其性能参数、设计特点作了较详细地叙述。
Rather new manufacturing technologies such as thin slab casting rolling and twin roll casting technology were prospected.
介绍了具有代表性的研发趋势，如薄板坯连铸连轧、双辊薄带铸轧等新工艺。
Macroscopic fluid flow and heat and mass transfer should be taken into account for the continuous thin slab casting process.
薄板坯连铸工艺应综合考虑传热、流动与传质宏观传输现象。
This system can solve the dynamic schedule problem of two-strand thin slab casting and rolling and optimize production management.
该调度系统可以较好地解决两流薄板坯连铸连轧流程的动态调度问题，进一步优化生产组织。
Research and development of mould powder for low carbon steel thin slab casting specially used in cold rolling at TISCO is introduced.
介绍了唐钢薄板坯连铸低碳冷轧用钢保护渣的研究开发过程。
Thin slab casting and rolling technology has been developing toward two directions: ultra-thin strip production and multiple steel grades production.
前言：薄板坯连铸连轧工艺有两个发展趋向：超薄带钢生产线和多品种生产线。
In contrast to conventional process, some thin slab casting and direct rolling process have similar or even better index in a few aspects of product.
与传统工艺相比，在一些直轧工艺中，其产品性能指数接近甚至在个别方面更优。
The status of thin strip production in thin slab casting and rolling process at Zhujiang steel is introduced, and main factors which affected the production is analyzed.
介绍了珠钢薄板坯连铸连轧生产线薄规格的生产情况，分析了影响薄规格生产的主要因素。
The strip products on medium thin slab casting and direct rolling line were analyzed based on the characteristics of the medium thin slab casting and direct rolling line.
本文主要从中薄板坯连铸连轧的特点出发，对中薄板坯连铸连轧的产品品种进行了分析。
The difference between thin slab casting and rolling process and traditional processes is analyzed in terms of process characteristics, thermal history, and inhibitor type etc.
从流程工序特点、热履历、抑制剂类型等方面进行对比，分析了薄板坯连铸连轧和传统板坯流程之间存在的差异性。
The causes of surface longitudinal cracking were analyzed. Countermeasures were put forward based on the production practices of thin slab casting and rolling at Tonghua Steel Co.
分析了连铸薄板坯表面纵向裂纹的产生原因，结合通钢薄板坯生产实际情况，提出了改进措施。
Based on the potential advantages of producing grain oriented silicon steel by thin slab casting and rolling process, the key technical difficulties to be solved are brought forward.
在总结薄板坯连铸连轧生产取向硅钢技术优势的基础上，提出了该流程研究需要解决的技术难点。
It is of great importance to rhythm and coordination of the thin slab continuous casting and rolling process.
时间因素对薄板坯连铸-连轧流程的节律性、协同性而言，其意义尤为重要。
Based on the simulation, some typical processes were investigated, and some useful Suggestions for the design of thin slab continuous casting and rolling line were proposed.
采用该软件对个别典型的工艺进行分析，为连铸连轧生产线的设计提出了有益的建议。
This program was applied to calculate the temperature distribution of copper thin-slab continuous casting with different casting speeds and cooling conditions.
利用该程序计算了不同拉速及冷却条件下，铜薄板连铸过程中温度场的分布，并分析了拉速、冷却条件对铸坯温度的影响。
It showed that EMBR could control vortex and improve the flow field in the thin slab continuous casting mould effetely.
计算表明，电磁制动对于抑制涡旋、改善薄板坯连铸结晶器中的流场有明显效果。
In the project of ASP1700 thin slab continuous casting and rolling, the system of mould width adjust in the continuous casting is equipped with the new digital alternating servo control system.
在济钢ASP1700薄板坯连铸连轧项目中，连铸机结晶器调宽系统采用了新型全数字交流伺服控制系统，代表当今世界最先进控制水平。
Buffer time of tunnel furnace is the key process in thin slab continuous casting and rolling (TSCR) line.
在薄板坯连铸连轧生产线中，加热炉的缓冲能力有时成为制约生产的关键。
The slab quality was the key to the research of thin slab continuous casting and rolling process.
铸坯质量问题是薄板坯连铸连轧工艺研究的核心问题。
This paper describes the characteristics of medium and thin slab continuous caster in detail and the principles must be observed to fit these characteristics during designing the casting powder.
详述了中薄板坯连铸机的特征，以及保护渣设计过程中，为适应这些特征所必须遵守的原则。
Thin slab concast & conroll combines the near net shape continuous casting and the direct rolling together, thus to shorten the conventional continuous casting & rolling process.
薄板坯连铸连轧将近终形连铸与直接轧制相结合，缩短了传统连铸与轧钢工艺流程。
In this paper, mathematical model and FEM software for the simulation of thermal process during continuous casting and rolling of thin slab were developed.
本文针对连铸连轧的热过程，建立了各工艺的热过程的数学模型，并开发了相应的软件。
Combining the advantages of conventional and thin-slab-production routes, this casting process is highly flexible and well suited for casting slabs used for a wide range of applications.
通过结合传统板坯连铸和薄板坯连铸的优点，中厚板坯连铸技术具有高度的灵活性，完全适合浇铸用途广泛的板坯。
Electromagnetic braking on flow field of molten steel in the thin-slab continuous casting mold is analyzed by mathematical modeling and experiment.
采用模型实验结合数值模拟的方法分析了薄板坯连铸结晶器的电磁制动过程。
The vortex flow and mold flux entrapment in the thin slab continuous casting mold was investigated using a 1/4 scale water model.
利用1/4水模型对薄板坯连铸结晶器内的涡流及卷渣行为进行观察研究。
应用推荐