Schedule rules for two-strand thin slab casting and rolling were established.
首先建立了两流薄板坯连铸连轧流程生产调度规则库。
Results from the analysis provides basis for the system optimization of the thin slab casting and rolling process.
分析结果为薄板坯连铸连轧流程的优化提供了依据。
This system can solve the dynamic schedule problem of two-strand thin slab casting and rolling and optimize production management.
该调度系统可以较好地解决两流薄板坯连铸连轧流程的动态调度问题，进一步优化生产组织。
Thin slab casting and rolling technology has been developing toward two directions: ultra-thin strip production and multiple steel grades production.
前言：薄板坯连铸连轧工艺有两个发展趋向：超薄带钢生产线和多品种生产线。
The status of thin strip production in thin slab casting and rolling process at Zhujiang steel is introduced, and main factors which affected the production is analyzed.
介绍了珠钢薄板坯连铸连轧生产线薄规格的生产情况，分析了影响薄规格生产的主要因素。
The difference between thin slab casting and rolling process and traditional processes is analyzed in terms of process characteristics, thermal history, and inhibitor type etc.
从流程工序特点、热履历、抑制剂类型等方面进行对比，分析了薄板坯连铸连轧和传统板坯流程之间存在的差异性。
The causes of surface longitudinal cracking were analyzed. Countermeasures were put forward based on the production practices of thin slab casting and rolling at Tonghua Steel Co.
分析了连铸薄板坯表面纵向裂纹的产生原因，结合通钢薄板坯生产实际情况，提出了改进措施。
Based on the potential advantages of producing grain oriented silicon steel by thin slab casting and rolling process, the key technical difficulties to be solved are brought forward.
在总结薄板坯连铸连轧生产取向硅钢技术优势的基础上，提出了该流程研究需要解决的技术难点。
It is of great importance to rhythm and coordination of the thin slab continuous casting and rolling process.
时间因素对薄板坯连铸-连轧流程的节律性、协同性而言，其意义尤为重要。
In the project of ASP1700 thin slab continuous casting and rolling, the system of mould width adjust in the continuous casting is equipped with the new digital alternating servo control system.
在济钢ASP1700薄板坯连铸连轧项目中，连铸机结晶器调宽系统采用了新型全数字交流伺服控制系统，代表当今世界最先进控制水平。
Buffer time of tunnel furnace is the key process in thin slab continuous casting and rolling (TSCR) line.
在薄板坯连铸连轧生产线中，加热炉的缓冲能力有时成为制约生产的关键。
Rather new manufacturing technologies such as thin slab casting rolling and twin roll casting technology were prospected.
介绍了具有代表性的研发趋势，如薄板坯连铸连轧、双辊薄带铸轧等新工艺。
The slab quality was the key to the research of thin slab continuous casting and rolling process.
铸坯质量问题是薄板坯连铸连轧工艺研究的核心问题。
Thin slab concast & conroll combines the near net shape continuous casting and the direct rolling together, thus to shorten the conventional continuous casting & rolling process.
薄板坯连铸连轧将近终形连铸与直接轧制相结合，缩短了传统连铸与轧钢工艺流程。
The process of thin slab continuous casting and direct rolling is different from the traditional one.
薄板坯连铸连轧工艺的生产流程有别于传统工艺流程。
Based on the simulation, some typical processes were investigated, and some useful Suggestions for the design of thin slab continuous casting and rolling line were proposed.
采用该软件对个别典型的工艺进行分析，为连铸连轧生产线的设计提出了有益的建议。
In contrast to conventional process, some thin slab casting and direct rolling process have similar or even better index in a few aspects of product.
与传统工艺相比，在一些直轧工艺中，其产品性能指数接近甚至在个别方面更优。
In this paper, mathematical model and FEM software for the simulation of thermal process during continuous casting and rolling of thin slab were developed.
本文针对连铸连轧的热过程，建立了各工艺的热过程的数学模型，并开发了相应的软件。
The strip products on medium thin slab casting and direct rolling line were analyzed based on the characteristics of the medium thin slab casting and direct rolling line.
本文主要从中薄板坯连铸连轧的特点出发，对中薄板坯连铸连轧的产品品种进行了分析。
Research and development of mould powder for low carbon steel thin slab casting specially used in cold rolling at TISCO is introduced.
介绍了唐钢薄板坯连铸低碳冷轧用钢保护渣的研究开发过程。
The thin slab continuous casting and rolling production line in Tang Steel is compared with the traditional process, the main quality control ways introduced.
对唐钢薄板坯连铸连轧生产线与传统热轧生产线轧制工艺特点进行了对比，介绍了该生产线在带钢轧制中所采取的主要质量控制手段。
The several aspects to be considered in the construction of the thin slab continuous casting and rolling line are highlighted in this paper.
文中着重讨论了薄板连铸连轧生产线建设中应研究的有关问题。
The thin slab continuous casting and rolling process is a reforming technology in the steel industry, and it should be mastered and promoted step by step in China.
薄板连铸连轧工艺是钢铁工业的重大变革技术，要切实掌握和逐步推广。
A suggestible solution is the combined production of thin slab continuous casting and continuous rolling together with strip casting, so that it will be complemental in superiority for both of them.
利用薄板坯连铸连轧和薄带铸轧组合方案生产不锈钢可以更好地形成优势互补。
This paper describes the production condition of cold rolled deep drawing quality steel (IF steel) by thin slab continuous casting and rolling technique in Bengang.
介绍了本钢薄板坯连铸连轧工艺生产冷轧深冲钢(IF钢)的情况。
The primary requirement of cold-rolling feeds, and the equipment design, production management and material flow of thin slab continuous casting and rolling, were investigated in the paper.
本文通过分析冷轧基料的一般要求、薄板坯连铸连轧工艺的设备配置、生产组织和物流衔接，提出了薄板坯连铸连轧工艺大规模生产冷轧基料的具体措施和建议。
Comparing with the thin slab continuous casting continuous rolling and tradition rolling technology, their product character and technology character have been discussed.
通过比较薄板坯连铸连轧与传统热带卷生产工艺，对薄板坯连轧生产产品特点和工艺特。占、进行客观分析。
The longitudinal surface crack on thin slab is a serious quality defect at thin slab continuous casting and rolling process.
薄板坯表面纵裂是连铸连轧生产线上的严重质量缺陷。
Microstructure Simulation of Thin Slab Continuous Casting and Continuous Rolling(CSP)Process;
介绍了连铸连轧法生产电解铜始极片的新工艺。
Microstructure Simulation of Thin Slab Continuous Casting and Continuous Rolling(CSP)Process;
介绍了连铸连轧法生产电解铜始极片的新工艺。
应用推荐