Through applying a case, this method is analyzed.
并应用算例对该方法进行了分析。
The character of this method is analyzed, and the examples of picture processing are shown.
分析了这种平滑方法的性能，对实际照片进行了处理。
Experiments results show that this method is effective. The error of this method is analyzed.
实验结果表明了该方法的有效性，并对该方法产生的误差进行了分析。
Meanwhile, the problems presented in this method is analyzed and improving suggestions are proposed.
同时，对采用此方法存在的问题进行了分析并提出改进意见。
The optimal condition for the differential detection is discussed and the detection sensitivity of this method is analyzed.
对差分探测方法的最优化条件进行讨论，并分析了此方法的探测灵敏度。
The error of this method is analyzed. A comparison is made between Analytic Orthogonalization and Iterative Optimal Orthogonalization.
进行了误差分析，并把解析正交化和最优迭代正交化作了比较。
The method of distributing synchronous signals, which delivers signals though CAN bus, is proposed. And the feasibility of this method is analyzed.
提出了一种通过CAN总线分配同步信号的方法，对该方法的可行性进行了深入分析。
A new method of the zero collimation of the warship weapon systems is studied. The principle of this method is analyzed. This method can be used day and night.
提出了一种舰载武器系统零位一致性检测的新方法，从理论上分析了该方法的原理。采用该方法，可以实现全天候联调检测。
The axcion can produce a non-diffracting beam, and it is used to extend depth of field of optical imaging system, and the theorem of this method is analyzed in this paper.
利用轴锥镜能产生无衍射光的特性，分析了将其应用到成像系统中增大景深的原理。
In this paper, a decomposable method of re limit is presented, and practical application of this method is analyzed. The same time design points of re also be given in th...
本文就此介绍了一种电磁兼容中辐射发射项目的分解方法，对其实用性进行了分析，同时给出其控制辐射发射指标的设计要点。
The design method of analyzed instruments based on Virtual technology is the availability way of celerity development instruments, this paper helps the instruments instead.
基于虚拟技术的分析仪器设计方法，是设计虚拟仪器系统以替代真实仪器，实现仪器快速开发的有效途径。
Computer implementations show that this new method reduces symbolic circuit analysis time and allows larger circuits to be analyzed when an error criterion is specified.
计算机运行结果表明这种新方法缩短了符号电路分析的时间，而且在限定了误差标准后，还可以用来分析大规模电路。
Finally, Using the method of calibrating instrument in a variational concentration calibrates this instrument. According to the result, the performance of the instrument is analyzed.
最后采用非恒定浓度的测氡仪器标定方法对研制的仪器进行标定，分析了仪器的一些性能指标。
The method to measure the refraction rate of liquids by using the least deflection angle is introduced and analyzed in this paper.
介绍一种利用分光计及自制盛液“三棱杯” ，采用最小偏向角法测量液体折射率的方法，并对该法进行了分析和讨。
In this paper, the principle of balanced transformation is analyzed; the balance mode, detection of compensating currents and controlling method of the active filter are discussed.
文中分析了系统平衡变换原理，讨论了系统的平衡方式、补偿电流检测与有源滤波器控制方法。
Objective A robust parameter estimation method applied to a class of medical dynamic monitoring data is introduced and analyzed in this paper.
目的介绍并分析适用于一类医学动态监测数据的稳健参数估计方法。
In this method, the multiresolution technology is used so that the image can be analyzed from coarse to fine.
该方法采用了由粗到细的多分辨率技术，以及自适应多尺度与自适应阈值技术。
The low-voltage power line channel properties are analyzed in this paper and a decision feedback channel estimation method is proposed on condition of slow time-variant of channel.
该文分析了低压电力线信道特性，利用信道慢时变的特点提出一种适合于电力线信道的判决反馈信道估计方法。
The theory and method of regional seismic tomography is analyzed and studied in detail in this paper.
本文对近震层析成像技术的理论与方法进行了详细地分析和研究。
In this thesis, the dynamic load identification of guyed mast method in time domain based on modal analysis is analyzed.
要解决这个问题，必须建立作用在桅杆结构上的动力风荷载的识别方法。
This software is analyzed, designed and implemented with object-oriented method.
该软件采用面向对象的方法进行分析、设计和实现。
The operating principle of the fluxgate sensor with three tips is analyzed, and a effective signal processing method is obtained in this paper.
文中分析了三端式磁通门传感器的工作原理，给出了有效的信号处理方法。
Finally, the influence of the random of structural physical on the structural dynamic reliability is analyzed through the examples, validating the feasibility of this method.
通过算例就各参数的随机性对结构动力可靠度的影响进行分析，验证本文方法的可行性。
The reason for abnormal leakage of general spring direct acting safety valve is analyzed and the method for overcome this abnormal leakage is proposed.
分析了一般弹簧直接作用式安全阀非正常泄漏的原因，提出了克服其非正常泄漏的方法。
The characteristics of the eigen value problem of general viscoelastic structure are analyzed and its modal analysis method is put forward in this paper.
分析了一般粘弹结构特征值问题的特点，建立了一般粘弹结构的模态分析方法。
The electric force of end winding in hydrogenerator stator is analyzed and calculated in this paper, and a set of complete calculating method was given.
本文针对水轮发电机定子绕组端部电动力进行了分析计算，并提出一套完整的计算方法。
A statistics of this method in the world is made, and its feasibility and investment in China is also analyzed.
统计了该方法在国外的运行情况，并对我国采取该方法的可行性进行了分析。
In this paper, Unscented Transformation (UT) method is applied to space alignment problem, and different UT sampling strategies are analyzed.
本文使用UT算法来处理空间配准问题，并针对不同的UT采样策略进行比较分析。
The comprehensive thermos method has been widely used. In this paper, it is analyzed how to select the construction methods for concrete.
砼综合蓄热法施工已被广泛应用，本文重点分析关于几种方法的合理选择。
In this paper, the ground subsidence hazard of Shanghai city is prognosticated and analyzed with data constitution method.
本文应用数据本构分析对上海市地面沉降灾害进行了预测分析。
应用推荐