It is shown that under suitable welding condition, the alloy can be welded well by using TIG arc welding and the welding wire having the same composition as the alloy.
结果表明，在一定的焊接工艺条件下，使用钨极氩弧焊和与母材同质的焊丝，可以对ZA12材料进行有效的焊接。
Welding equipment includes automatic plasma arc and TIG hardfacing machines. Only a few typical machines are shown here.
焊接设备包括自动等离子弧和TIG 表面硬化机械设备。在此只展示少数典型设备。
After visual inspection and metallographic test, analysis and discuss the welding zone cracking reasons for 6061 and A7003 aluminum alloy thin-walled tube after TIG (argon shielded arc) welding.
通过宏观及微观检测，分析了6061铝合金管及A7003铝合金薄壁管经TIG(氩弧)焊后的焊接区开裂的原因。
Re melt deposit welding process is proposed in this paper. To realize the technology, plasma arc, TIG arc, high frequency induction, gas shield continuous stove and MSW are adopted.
提出熔敷焊接工艺方法，采用等离子弧、TIG电弧、高频感应、气保护连续炉、真空炉和模中熔铸工艺实现了熔敷焊接工艺方法。
The experimental results show that the power source meets the requirements presented by the pulse TIG welding. DC TIG welding and manual arc welding, and is a new many functions power source.
研究结果表明，所研制的焊机可以满足脉冲tig焊、直流tig焊、手工电弧焊三种方法的焊接要求，是一种新型多功能焊机。
Welding equipment includes automatic plasma arc and TIG hardfacing machines.
焊接设备包括自动等离子弧和TIG表面硬化机械设备。
The results show that whether the arc of A-TIG welding shrinks is related with active flux used. The surface active flux still has the effect on weld pool depth even when arc does not shrink.
结果表明，A-TIG焊电弧是否产生收缩与所使用的活性剂有关，即使在电弧未产生收缩情况下，表面活性剂仍然对焊接熔深的增加有较大的作用。
The discrete time mathematical model of a switched TIG welding power source is established. The arc ignition process, its property, current wave form and arc stability are analysed.
本文建立了开关式TIG焊电源的离散时域数学模型，分析了电弧引燃过程、引弧性能、电流波形特点和电弧稳定性。
During the laser-TIG hybrid process, the arc keeps stable when the welding speed increases because of the inducting and compression of laser on the TIG arc.
激光与电弧的复合热源在焊接过程中，由于激光的压缩与引导作用，可以在焊接速度增加时，电弧仍然较稳定。
The effect of active flux and arc shrinking in A-TIG welding is studied through detecting arc voltage with variant welding current.
在变动焊接电流下检测电弧电压，考察a -TIG焊电弧收缩及活性剂的影响。
English Name:Welding and allied processes - Recommendations for joint preparation - Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels.
简体中文标题：焊接和相关工艺。接缝制备的建议。钢的手动金属电弧焊、气体保护金属电弧焊、气焊、TIG焊接和束焊。
The effect of active flux and arc shrinking in A-TIG welding is studied through detecting arc voltage with variant welding current in this paper.
在变动焊接电流下检测电弧电压，考察a -TIG焊电弧收缩及活性剂的影响。
The developed welding power source ZX5-800Dshows a satisfactory performance in the welding process of TIG. Shield metal arc, submerged arc and the. carbon arc air gouging.
研制的ZX5一800D电源在进行钨极氩弧焊、手工电弧焊、碳弧气刨及埋弧焊时均获得满意的性能。
According to the arc light features of pulsed TIG welding and its effects on vision measurements, a special method of image capturing and controlling is put forward.
根据脉冲tig焊接电弧的弧光特性及其对视觉检测的影响，提出了一种独特的图象采集和控制方法。
By combining experiment with theoretical analysis, the influence of adding axial magnetic field on shape and properties of tungsten inert gas (TIG) welding arc and weld profile was studied.
采用实验与理论分析相结合的方法，研究了外加纵向磁场对TIG焊电弧形态、电弧静特性及焊缝形貌的影响。
With modular form of the software structure, the calculating problem is designed to simulate the 3-d transient TIG welding thermal process with a moving arc.
采用模块化结构设计，编写了一套适合于模拟运动电弧作用下三维瞬态tig焊接热过程的计算程序。
According to small signal theory of automation theory, arc of low current TIG welding can be considered as a linear system.
依据自动控制理论中的小信号理论，小电流TIG焊的电弧具有线性系统的特征。
This article introduces a method of arc initiation and stabilization, which is used in low current DC TIG welding, it analyzes the controlling circuit that realizes these functions.
介绍一种小电流直流tig焊中的引弧及稳弧方法，并对实现此功能的控制电路进行了详细的分析。
The influence of He-to-Ar ratio in AC-TIG on the AZ31 welding properties was studied. The arc characters, weld penetration, joint forming were measured and analyzed.
探讨了氦气和氩气不同配比对AZ31 镁合金交流钨极惰性气体保护焊（TIG）焊接性的影响，对不同气体配比的混合气体电弧特性、熔深、焊缝成型进行了分析和测定。
And the effect of SPreading fusion of active flux on weld pool depth and arc phenomenon in A-TIG welding is also studied with properly experimental method.
采取适当的试验方法研究A-TIG焊活性剂对电弧现象及活性剂涂敷量对焊接熔深增加的作用。
As an important heat source in welding, TIG arc is widely used in manufacturing industry, especially for aluminum alloy joining processes.
TIG电弧是焊接生产中的一种重要热源，交流TIG电弧在铝合金的焊接制造中的应用亦已相当广泛。
And it relates the design about a new high pressure pulse arc starter of TIG welding.
讲述了一种新型TIG焊高压脉冲引弧器的设计。
The measuring methods of D C TIG welding arc anode sheet surface current density split sheet method and probe (made by ourselves) method were analysed and compared.
对直流TIG电弧阳极板表面电流密度的测量方法——分离极板法和探针（自制）法进行了分析比较。
Such as electric arc welding, carbon dioxide gas shielded arc welding, TIG etc.
电弧焊、二氧化碳气体保护焊、氩弧焊等各种焊接。
The developed welding power source ZX5-800Dshows a satisfactory performance in the welding process of TIG. Shield metal arc, submerged arc and the. carbon arc …
研制的ZX5一800D电源在进行钨极氩弧焊、手工电弧焊、碳弧气刨及埋弧焊时均获得满意的性能。
In AC TIG welding, it needs add some complex control method to ensure the quality of welding, such as negative-pole atomization affects, D. c. of elimination and reduce, and arc stabilizing etc.
在进行交流TIG焊时，需要增加一些较复杂的控制方式，如：阴极雾化作用、消除和减小直流分量、稳定电弧等，以保证焊接的正常进行。
The effect of active flux and arc shrinking in a - TIG welding is studied through detecting arc voltage with variant welding current to this paper.
在变动焊接电流下检测电弧电压，考察a-TIG焊电弧收缩及活性剂的影响。
The developed welding power source ZX5-800Dshows a satisfactory performance in the welding process of TIG. Shield metal arc, submerged arc and the…
研制的ZX5一800D电源在进行钨极氩弧焊、手工电弧焊、碳弧气刨及埋弧焊时均获得满意的性能。
The developed welding power source ZX5-800Dshows a satisfactory performance in the welding process of TIG. Shield metal arc, submerged arc and the…
研制的ZX5一800D电源在进行钨极氩弧焊、手工电弧焊、碳弧气刨及埋弧焊时均获得满意的性能。
应用推荐