The torque force section is changed to a regular hexagonal prism from a regular quadrangular prism.
是以由引入段、切削段、锥杆段和扭力段组成的丝锥组成的。
With a limited torque force, it can effectively reduce the damage to the minimum level that caused by improper operation.
扭力限制设定，有效降低操作不当所造成之损害。
Through torque force test, the self-lubricating property of the coating was evaluated by analyzing the data in mathematical way.
通过扭力测试评价涂层的自润滑性，并用数学方法分析数据。
Pump discharge of oil with reasonable design, gear oil and back at work under minimum torque force bearing load, so small, wear small, pump with high efficiency.
泵内有设计合理的泄油和回油槽，是齿轮在工作中承受的扭矩力最小，因此轴承负荷小，磨损小，泵效率高。
Walking in high heels increased the normal torque forces at the knee by an average of 23%, which imposed a greater stretching force through the lateral knee ligaments.
穿高跟鞋让膝关节承受的压力平均增加了23%，膝盖韧带外侧承受了更大的压力。
AIM: to investigate the effects of torque force load on the stress distribution in implant bone interface, so as to help the clinical selection of implant location.
目的：研究扭转力载荷对支抗种植体骨界面应力分布的影响，以指导临床正确选择支抗种植体的植入部位。
The utility model relates to a torque force regulating mechanism of chair carrier restoring torsion spring, which belongs to the technical field of improved structure of a chair carrier.
本实用新型涉及一种椅子托盘复位扭簧扭力调节机构，属于椅子托盘结构改进的技术领域。
Pump is the drainage and back into the groove of reasonable design, is a gear in the work under the minimum torque force, so the bearing load is small, wear small, pump with high efficiency.
输送皂角泵内有设计合理的泄油和回油槽，是齿轮在工作中承受的扭矩力最小，因此轴承负荷小，磨损小，泵效率高。
Pump is the drainage and back into the groove of reasonable design, is a gear in the work under the minimum torque force, so the bearing load is small, wear small, pump with high efficiency.
泵内有设计合理的泄油和回油槽，是齿轮在工作中承受的扭矩力最小，因此轴承负荷小，磨损小，泵效率高。
The drive features AB's Force Technology, a field-oriented control that permits independent control of speed and torque.
这个驱动器是 AB 电动技术的代表产品，它是一个定向控制可以分别控制速度和扭矩。
In rotation, force becomes torque, mass becomes moment of inertia, and acceleration becomes angular acceleration.
在旋转时，力变成力矩，质量变成转动惯量，加速度变成角加速度。
So we generate a torque which is proportional to the Angle, very similar to the linear spring whereby we generate a force which is proportional to the linear displacement.
所以产生一个力矩，和这个角成比例，就像线性弹簧，中产生的力矩和，线位移成比例。
Remember, torque is the rotational analog of the force.
扭矩是力转动的对应量。
And so the net, the sum of all forces on that object there is no net force on that wheel but there is a net torque, and that's why it's going to precess.
所以综合，物体受的所有力，车轮不会受到净力，但是有一个，净作用力，那就是我要推进的。
This causes the applied force to act as a torque, which therefore gives the ball a spin.
这将导致作用力产生一个扭矩，使球旋转。
Torque is the scientific term for turning force, and it is measured in newton-metres (Nm).
扭矩是一个用来描述扭转力的科学术语，它的单位是牛顿-米（Nm）。
I want to remind you that if we have a solid in a force field, we can measure the torque exerted by the force on the solid.
提醒你们，假设力场中有一固体，可以由力对固体的作用测量出其扭转力矩。
But I don't care about that force because I'm going to take the torque about point p.
但是，我不在乎这些力，因为我要取的是，点p的力矩。
So the torque that I apply is bF, is this arm, so to speak, times this force.
,所以我用的力是bF，在这边，可以说，乘以力。
The roll separating force, rolling torque and contact pressure along the surface of the rolls are also evaluated by means of the finite element method.
轧制分离力、轧制力矩以及沿轧辊表面的接触压力也通过有限元法进行评估。
On this basis, back electromotive force without load and with load is researched, simulated and analyzed, and cogging torque is analyzed and calculated in different dimensions of magnetic steel.
在此基础上，仿真了空载和负载下的电机反电动势，并且对不同磁钢尺寸下的定位力矩进行了分析计算。
扭矩是一种旋转力。
The strong knurled collar receives the installation force and resists torque.
坚固的花齿铆接后能够承受巨大的扭力。
The structural features of the developed 395DB clutch are briefly introduced, and the clutch′s torque capacity, temperature rise, slipping work and pedal force are reviewed.
简要介绍了设计的395DB离合器的结构特点，并对该离合器的传递扭矩、温升、滑磨功、踏板力进行了校核。
The methods for measuring control force and brake torque of the motorcycle brake are introduced and the factors affecting precision are analysed.
介绍了摩托车制动器操纵力和制动力矩的测量方法，分析了对测量精度的影响因素。
According to counterpoise torque curve, effect of magnifying force of several transmission schemes can be obviously viewed.
借助于平衡力矩曲线能够直观地看出不同传动方案的增力效果。
The paper focuses on the study of dynamics parameters that include flow rate, power consumption, torque and axis force of twin screw pulping extruder.
本文主要对双螺杆磨浆机的动力学参数(流率、功耗、螺杆扭矩和轴向力)进行了研究。
Through decoupling control of the torque windings and suspending force windings, the rotor of motor simultaneously have functions of producing torque and self-suspension.
通过对转矩绕组和悬浮力绕组的解耦控制，使电机的转子同时具有产生转矩和自悬浮的功能。
With the help of this optimization model, the optimized drill structure, which will generate minimum radial cutting force and torque, can be determined for different cutting conditions.
利用该优化模型对不同加工条件下的浅孔钻进行优化，得到使径向合力及扭矩为最小时的钻头结构参数。
With the help of this optimization model, the optimized drill structure, which will generate minimum radial cutting force and torque, can be determined for different cutting conditions.
利用该优化模型对不同加工条件下的浅孔钻进行优化，得到使径向合力及扭矩为最小时的钻头结构参数。
应用推荐