The process of the design of the brushless torque motor control circuit based on the MSK4364 is introduced.
介绍基于MSK4364型驱动器的某型无刷力矩电机驱动电路的设计过程。
Designed using this method the DC torque motor control system has been developed in the TMS320F2812 board running smoothly.
利用该方法所设计的直流力矩电机控制系统已在TMS320F 2812开发板上顺利运行。
Full-bridge PWM motor drive A3952 is introduced in this paper, and an example is given for single phase DC brushless torque motor control.
介绍了一种全桥脉宽调制芯片A 3952的特点和功能及其在单相无刷直流力矩电机控制中的应用。
Coiling using drip irrigation with the torque motor control, equipped with speed control system, effectively overcome the tension defects.
滴灌带的卷取采用力矩电机控制，配备调速系统，有效克服张力缺陷。
Direct control of torque over the motor speed range is provided by the drive, which helps the motor and drive generate torque levels high enough to cycle the press back to ready position.
直接控制扭矩而不是电机转速范围，可以使得电机和变频器产生足够高的扭矩使得压机可以回复到原来的位置。
We adopt vector control function with LG inverter, can make the motor in the low speed can also provide meet the need of the load torque.
我们采用具有矢量控制功能的LG变频器，可使电机在低速时也能提供满足负载需要的转矩。
Due to the large torque ripple of inductance motor based on direct torque control, especially at a low speed, this paper proposes a new control strategy.
针对基于直接转矩控制的感应电动机在低速运转时存在较大的转矩脉动问题，该文提出一种新的控制方法。
Due to the large torque ripple of inductance motor based on direct torque control, especially in a low speed, this paper proposes a new control strategy.
针对基于直接转矩控制的感应电动机在低速运转时存在较大的转矩脉动问题，提出一种新的控制方法。
A control system of bearingless induction motor based on torque winding air gap field oriented vector control is accomplished.
实现了一种基于转矩绕组气隙磁场定向控制的无轴承异步电机控制系统。
Due to the large torque coefficient, small torque ripple and ease of control, permanent magnet synchronous motor (PMSM) system has been widely used in many accurate servo control systems.
永磁同步电动机系统具有力矩系数大、力矩波动小以及控制灵活等优点，在许多精密伺服控制系统中得到广泛应用。
Later, the control strategy and the software have been designed, the primary target is to get the assisting table, assisting torque of the motor and PID control of the current.
随后进行了控制策略和控制软件的设计，完成了助力表、电机目标转矩和电机电流的PID控制。
According to the problem of position of DC torque motor, an new fuzzy control way was put forward.
针对小功率直流力矩电动机的定位控制问题，提出了一种新的模糊控制策略。
This paper obtains a new speed-sensorless direct torque control scheme for induction motor based on calculating the stator flux vector increment to determine the stator reference voltage.
在直接转矩控制理论基础上，推导出一种基于定子磁链矢量增量来确定定子参考电压矢量的新型无速度传感器直接转矩控制方案。
The tension control system using permanent-magnet DC torque motor as executive component is design. It can inspect and adjust tension at real-time during winding.
设计了以永磁式直流力矩电动机为执行元件的张力控制系统，它能够实时检测和调整缠绕过程中纤维的张力。
The effect on the control system caused by the parameters of the BLDC torque motor is discussed.
讨论了无刷直流力矩电动机系统参数对整个控制系统的影响。
Aiming at the steering gear machinery in some missiles, adopting the combined configuration of small rare earth torque motor and harmonic drive reducer, a combined control strategy is designed.
针对某型号弹上舵机采用的小型稀土力矩电机与谐波减速器的组合方案，本文设计了一种组合式分段控制算法。
As a high performance ac asynchronous motor drive system, accurate torque and position control is necessary for high-speed motorized spindle.
作为一种高性能异步电动机传动，精确的转矩转速和位置控制对于高速电主轴来说是必需的。
DC torque motor under the reaction flywheel control mode was used in nacelle azimuth control in this paper.
实现了用直流力矩电机在反作用飞轮控制方式下对气球吊篮的方位控制。
The model shows that the electro-magnetic coupling relationship inside the two-pole PM spherical motor is simple and that the torque of the motor is easy to control.
所得结果表明，双极永磁球形电动机内部电磁关系简单，易于实现对转子位置的控制。
The nacelle azimuth control of DC torque motor under the reaction flywheel control mode is presented, and the nacelle azimuth control system is investigated in theory.
提出了用直流力矩电动机在反作用飞轮控制方式下对气球吊篮的方位控制，从理论上研究了气球吊篮方位控制系统。
For the large torque ripple of inductance motor based on direct torque control, especially at a low speed, this paper proposes a new control strategy.
针对基于直接转矩控制中的感应电动机在低速运转时存在较大的转矩脉动问题，提出了一种新的控制方法。
In this paper, a direct instantaneous torque control (DITC) of switched reluctance motor (SRM) with a four-level converter is presented.
主要论述了基于四电平功率变换电路的开关磁阻电机直接瞬时转矩控制。
It deduces the direct torque control for Switched Reluctance motor compared with the method used on the inductive motor.
在类比了异步电机的基础上推导了开关磁阻电机的直接转矩控制方法。
The application of HV-IGBT shows good applied prospects for the strategy of vector control or direct torque control of induction motor.
表明采用HVIGBT对感应电机传动的矢量控制或直接转矩控制策略具有良好的应用前景。
A new direct torque control (DTC) strategy based on duty ratio control technique of induction motor drives is presented.
文中提出了一种新的基于占空比控制技术的异步电机直接转矩控制方案。
A permanent magnet synchronous motor servo system based on torque Angle control is proposed in this paper.
在矩角控制的基础上，提出了永磁同步电动机的定位控制方案。
A permanent magnet synchronous motor servo system based on torque Angle control is proposed in this paper.
在矩角控制的基础上，提出了永磁同步电动机的定位控制方案。
应用推荐