Results the transverse strength and shear strength were increased with the increase of the carbon fiber content.
结果随着碳纤维含量的增加，根管桩的弯曲强度和剪切强度均逐渐增加。
In accordance with the special characteristics of this type of ship, a proper load predication method is adopted for hull longitudian strength, shear strength and transverse strength.
本文针对船型的特殊性，采用了适宜的载荷预报方法，妥善地解决了该船体的总纵强度、剪切强度及横向强度。
Because of the special dimension and working condition of floating dock, the general strength, such as longitudinal strength and transverse strength, was performed strictly to the structure.
对于浮船坞而言，由于其型尺度和作业工况特殊，因此总强度、纵强度、横强度等结构要求比较高。
Transverse rupture strength, Rockwell a hardness, magnetic saturation induction and magnetic coercivity of samples sintered in vacuum or by sinter-HIP were measured.
测试了真空烧结和低压烧结试样的抗弯强度、洛氏硬度、磁饱和度和矫顽磁力。
It is obvious that early analyzing of strength of transverse frame structure has significant importance in designing the midship section.
由此可见在中剖面设计阶段，及早开展横向肋框的强度分析是十分有意义的。
To the problem of more yield strength error in SSAW pipe transverse strip specimen tensile tests, analyze the reason of the error, put forward corresponding solving method.
针对螺旋埋弧焊钢管横向板状试样在拉伸试验时存在的屈服强度误差较大的问题，分析了其误差较大的原因，并提出了相应的解决办法。
The parameters in the aeries include: amount of longitudinal reinforcement, amount of transverse reinforcement, shear span-to-depth ratio, thickness of tube wall and strength of concrete.
试验中的主要参数有：纵向钢筋的数量、横向配筋率、剪跨比、管壁的厚度及混凝土强度。
Experimental results indicate that when strengthened with transverse CFS, the ductility of the columns improved significantly, and the ultimate strength increased as well.
试验结果表明，横向粘贴CFS能显著地改善偏压柱的延性，柱的承载力也有所提高。
The calculated strength could show the affection caused by transverse shear effect and the affection had only relation to the loading value and no to the ratio of span-height.
预测的强度能够反映出横向剪切效应的影响，其影响只与载荷大小有关，而与跨高比无关；
When strengthened with transverse CFRP, the ductility of the columns improved significantly, and the ultimate strength increased as well.
横向粘贴CFRP能显著地改善偏压柱的延性，柱的承载力也有所提高；
The bond-anchoring strength of rebar (whether transverse ribs distributed symmetrically or not) increased with increase in concrete strength when they had the same of anchorage length.
粘结锚固长度相同时，无论是横肋对称还是横肋非对称钢筋粘结强度随混凝土强度的提高而提高。
The effect of field strength, initial phase, bunch shape and charge on electron beam transverse emittance is also explored by numeric simulation method.
利用数值模拟方法研究了加速场强、注入相位、束团大小、形状、电荷等因素对束流横向发射度产生的影响。
The hardness increased, but the density, transverse rupture strength and compressive strength decreased when prolonging the holding time.
随着球磨时间的延长，烧结合金的硬度升高，密度、横向断裂强度和压缩强度均下降。
The effects of milling time and sintering temperature on density, hardness, transverse rupture strength and compressive strength were mainly studied.
重点研究了球磨时间和烧结温度对烧结合金的密度、硬度、横向断裂强度和压缩强度的影响。
The definition formulas and new calculation formulas for transverse load factors of tooth strength and surface durability are proposed.
分别提出了弯曲与接触强度端面载荷系数的定义式和新的计算式。
The similar tendency was also found in the transverse flexural strength of the composites.
在侧向纤维方向的材料弯曲强度也可发现相同的趋势。
It was also found that at a fixed temperature the transverse-rupture strength of the alloy generally increased with the steepness of load-deflection curves.
还表明，在一定温度下，载荷-挠度曲线越陡，合金的抗弯强度一般也越高。
Results showed that sinter-HIP treatment can enhance the transverse rupture strength of WC-Co cemented carbides effectively.
结果表明：低压烧结工艺可以有效提高硬质合金的抗弯强度；
The results show that transverse magnetic field can refine the primary crystallization structure by electromagnetic stirring and improve the ultimate strength and hardness of the welded joint.
结果表明，通过外加横向磁场对熔池进行搅拌，可以使焊缝晶粒得到细化，进而使其抗拉强度和硬度等力学性能得到改善；
Computing result indicates that quasi transverse circular arc gear is basically equal on strength distributing along tooth depth direction and it is superior to normal plane circular arc gear.
计算结果表明，准端面圆弧齿轮基本上是沿齿高方向等强度分布，优于法面圆弧齿轮。
High tooth gear has small module, small pressure Angle, and large addendum to enlarge the transverse contact ratio, improve gear strength, and reduce the noise.
细高齿齿轮是采用小模数、小压力角、大齿顶高来加大端面重合度，达到提高齿轮强度、降低噪声的目的。
The ultimate tensile strength(UTS) both in transverse and longitudinal of pipe body showed the trend for rising.
母材纵向的屈服强度及其屈强比均有上升趋势；钢管母材横向和纵向抗拉强度都呈上升趋势。
The stress-strain curve under transverse loading of MMCs has a corner point, associated with the initiation of interfacial de-bonding, which is determined by the interfacial bonding strength.
在常响应界面情况下，复合材料横向拉伸应力-应变曲线存在明显的转折点，对应于界面分离的起始点，转折点的位置取决于界面粘结强度。
The results showed that cemented carbide manufactured by sinter-HIP is free of porosity and transverse-rupture strength, bending fatigue life are also greatly increased.
结果表明，烧结-热等静压制作的硬质合金孔洞消除了，并且硬质合金的抗弯强度和弯曲疲劳寿命也大幅度提高。
Elevating sintering temperature, the density increased and the hardness decreased, but the transverse rupture strength and compressive strength were increased at first and then decreased.
随着烧结温度的升高，烧结合金的密度增加，硬度降低，横向断裂强度和压缩强度则先升高后降低。
In the earthquake, the common transverse reinforcement can not be effectively restrain, resulting in seismic behavior of the high-strength concrete columns is poor.
在地震作用下，普通箍筋不能对构件形成有效地约束，导致高强混凝土柱抗震性能较差。
In the earthquake, the common transverse reinforcement can not be effectively restrain, resulting in seismic behavior of the high-strength concrete columns is poor.
在地震作用下，普通箍筋不能对构件形成有效地约束，导致高强混凝土柱抗震性能较差。
应用推荐