Three sets of 100mw turbine generator are arranged in plant.
厂内布置了三台100MW水轮发电机机组。
The main fault mechanism and characteristics of steam turbine generator unit was researched.
系统研究了汽轮发电机组的主要故障机理和特征。
Low alloy heat-resistant steel is widely applied to large steam turbine generator equipment.
低合金耐热钢广泛应用于大功率汽轮机等发电设备中。
The wind facing control system is very important to ensure wind turbine generator to run well.
风力发电机的迎风控制对于保证其正常发电十分重要。
This paper introduced the stator coil manufacturing technology of GE390H gas turbine generator.
介绍了GE390 H燃气轮发电机定子线圈的制造工艺研究。
The exciter vibration is a more general problem in existing operational steam turbine generator unit.
励磁机振动是汽轮发电机组运行中较为普遍的一个问题。
This shows, and carry out large turbine generator fault diagnosis technology research is very necessary.
由此可见，开展大型汽轮发电机组的故障诊断技术研究是非常必要的。
To improve power system stability the fast valving of steam turbine generator set is an effective approach.
汽轮发电机组采用快关汽门，是提高电力系统稳定性的一项有效措施。
A new nonlinear control for hydraulic turbine generator units based on the extended state observer (ESO) is proposed.
提出了一种基于扩张状态观测器的水轮发电机组非线性控制。
After a turbine generator is installed and put into operation, its rotor inertia may be required to be measured sometimes.
水轮发电机在安装完毕或投入运行后，有时会遇到要求测量转子的安装转动惯量问题。
With excellent performances, the elastic metal-plastic pads are widely used in the thrust bearing of the water turbine generator sets.
弹性金属塑料瓦以其独特的性能，在水轮发电机组推力轴承上得到广泛应用。
In this paper, the vibration characteristics of frame foundation for steam turbine generator set is performed by model modal test method.
采用模型模态试验方法对汽轮发电机组框架式基础的振动特性进行了研究。
The main power generator groups in platform power stations are basically piston natural gas generator group and gas turbine generator group.
近海油田平台电站主发电机组主要是活塞式燃气发电机组和燃气轮机发电机组。
When the design head was 37. Om, the electricity generated by turbine generator increased to 5.0 million KW, which was relatively reasonable.
如将设计水头提高到37.0米，水轮机发电机出力增容到5.0万千瓦是合理的。
Under this circumstances, considering the product sales orders of Jinan Power Equipment Factory, we developed gas-turbine generator of WY16Z-037LLT.
在此情况下，结合济南发电设备厂的产品定货合同，研制了WY 16 Z- 037ll T燃气轮发电机。
Taking wheel hub as example, the investigation on the production process of heavy nodular iron castings used for wind turbine generator was introduced.
以轮毂为例，介绍对大型风力发电机球墨铸铁件生产工艺进行的试验研究。
A good fault orientation method is not yet available in the fault diagnosis for the electric-hydraulic regulating system of a water-turbine generator set.
在目前水轮发电机组电液调节系统故障诊断方法中，还没有出现很好的故障定位方法。
Use the system makes the water-turbine generator set work safely and it's a sign that internal hydropower project achieves the world's most advanced level.
该系统的使用既为机组的安全运行提供了保障，同时也成为我国水电事业步入世界先进行列的标志。
A separated collecting ring with carbon brushes was designed and manufactured for the dynamic stress test of spoke plates of rotor of bulb tubular turbine generator.
根据测试需要，设计自制了分体式碳刷集流环，对灯泡贯流式水轮发电机转子辐板进行了动应力测试。
The simulation of steam turbine generator sets' fault diagnosis demonstrates that the system takes full advantages of diversified information and improves diagnosis precision.
通过对汽轮发电机组的应用仿真，说明该系统充分利用了各种信息，提高了确诊率。
Based on the theory of multi-conductor transmission line, a model used to predict the steep-fronted surge propagation in large turbine generator stator windings was presented.
基于多导体传输线理论，建立了分析大型汽轮发电机绕组中陡前沿波过程的分布参数仿真模型。
This paper makes a deep study on the simulation object, the modeling method and the simulation realization of mixed-flow hydraulic turbine generator unit and auxiliary machinery.
本文针对混流式水轮发电机组及辅助设备，从仿真对象、建模方法到仿真实现作了较深入的研究。
For large gas-turbine generator or single-shaft units which is started with synchronized motors 2 sets of SFC devices with mutual stand-by should be provided for 2 or 3 generators.
对于以同步马达运行方式启动的大型燃气轮发电机或单轴机组的发电机，每2台或3台发电机装设2套互为备用的SFC装置。
The data collection accuracy is depends on the efficiency calculation of water turbine generator units; and the evolutional method should be used to solve the load dispatch problem.
数据采集的速度与精度主要由机组效率曲线计算和机组耗流量在线计算解决，负荷分配问题需引入如进化算法等新方法解决。
Presently, the method of steady state unbalanced currents is widely used in the field test of torsional vibration characteristics of large-scale steam turbine generator rotor system.
目前大型汽轮发电机组轴系扭振特性的现场试验中广泛采用稳态不对称短路变频激振法。
A method of performing platform stabilization control was described by using the downhole turbine generator as the initiator of force moment and by adjusting its electromagnetic moment.
介绍和分析了一种用井下涡轮发电机作为力矩发生器，通过调节其电磁力矩的方法来实现稳定平台控制的方法。
In view of the debugging demand in the development and custom-made process of Predictive Maintenance Device of Turbine Generator Shaft, this paper introduces a digital debugging system.
针对汽轮机轴系预测维修装置在开发和定制过程中的调试需求，介绍了一种数字化辅助调试系统的构成和功能。
In view of the debugging demand in the development and custom-made process of Predictive Maintenance Device of Turbine Generator Shaft, this paper introduces a digital debugging system.
针对汽轮机轴系预测维修装置在开发和定制过程中的调试需求，介绍了一种数字化辅助调试系统的构成和功能。
应用推荐