Often serves as the low power water turbogenerator.
常用作小功率水轮发电机。
Solid particle erosion may damage the turbogenerator sets.
固体颗粒磨蚀对汽轮机的危害不可忽视。
The retaining ring is an important component of turbogenerator.
护环是汽轮发电机的重要部件。
Gas turbogenerator fault diagnosis can be treated as a pattern classification task.
燃气轮发电机组的故障诊断，实质上是一个模式分类问题。
Key technology of spring-key-bar's assembling and welding of 300MW turbogenerator is introduced.
本文介绍了300MW汽轮发电机整体弹性定位筋装配及焊接时的关键工艺。
The holy of holies – turbogenerator which produces the very electricity. It's power is 60 megawatt.
最神圣的是，涡轮发电机可以发出高达60兆瓦的非常电。
The noise level of turbogenerator can be effectively controlled after its vibration level is reduced.
通过对汽轮发电机组进行减振改进后，机组的噪声都得到有效的控制。
This paper introduces a new manufacturing technology for the turbogenerator frame to raise the output rate.
文中介绍了一种新的汽轮发电机机座制造工艺，提高了生产率。
An optimum adjustment is investigated of the shafting dynamic location of a large-sized turbogenerator unit.
本文研究了大型汽轮发电机组轴系动态位置的最优调整。
A finite element method is presented for the calculating natural frequency of turbogenerator stator end windings.
本文提出一种计算汽轮发电机定子绕组端部振动固有频率的有限元方法。
In a small thermo-power plant, an segregation accident occurred in the process of concreting a C15 turbogenerator foundation.
某小型热电厂一台C15汽轮发电机在汽机基座浇筑过程中出现混凝土离析事故。
According to vibration characteristic spectrum, a gas turbogenerator fault diagnosis approach based on rough set theory is proposed.
本文以振动特征频谱为依据，提出了一种基于粗糙集理论的燃气轮发电机组故障诊断新方法。
This paper presents a new transposed connecting method for the diamond airgap armature winding of the superconducting turbogenerator.
本文对超导汽轮发电机篮式气隙电枢绕组提出了一种新的换位联接方法。
The integrity and accuracy of the real-time data acquired by DCS are the foundation of turbogenerator optimizing operating expert system.
从DCS系统得到的实时数据的完整性和准确性是汽轮发电机组优化操作专家系统的基础。
The highest temperature distribution in the rotor slot section of 300mw turbogenerator is taken as example to be calculated in this article.
本文以300MW转子槽部温度最高的一段温度分布为例进行计算。
This paper presents a method for calculating the modal logarithmic decay ratio of the shaft set torsional vibration in a turbogenerator unit.
本文给出了一种汽轮发电机组轴系扭转振动模态对数衰减率的计算方法。
Applying the general theory of the coordination control, the coordination control system of the imported 330mw turbogenerator unit is analysed.
应用协调控制的一般原理，分析了引进型330MW机组协调控制系统。
In this paper the structure and operation of a static excitation system which was imported form Italy for320MW turbogenerator set are presented.
本文介绍了从意大利引进的320 MW燃煤机组静态励磁系统的结构特点和运行情况。
Rational modeling of air movement in ventilation ducts of large air-cooled turbogenerator is the crucial factor for correct numerical calculation.
采用合理的计算模型对大型空冷汽轮发电机通风结构中气体运动流场进行数值模拟是保证数值计算结果是否正确的关键。
In this paper a macro-cracking in the medium casing which is a heavy section casting of 261 turbogenerator was investigated by SEM, EDAX and others.
采用扫描电镜断口分析、微区能谱分析等方法研究了261汽轮机中汽缸大型铸件开裂问题。
The modification for the natural frequency and the mode of vibration of blade are needed to treat the fault of steam turbogenerator caused by it's blades.
为分析处理汽轮发电机组运行中因叶片振动引起的故障，需调整叶片的固有频率和振型。
The simplified algorithm was applied to fault classifier which classifies steam oscillation fault and bearing bushing looseness fault of turbogenerator set.
依据简化算法实现了二分类故障分类器的参数优化，并应用于汽轮发电机组的蒸汽激励和轴瓦松动故障的分类器中。
The cause of vibration on the turbogenerator stator end winding is analyzed, and the meaning of natural frequency test and vibration measurement is discussed.
本文分析了引起汽轮发电机定子绕组端部振动的原因，以及固有频率试验和振动测量的意义。
The previous study for coupled lateral and torsional vibration of turbogenerator rotor and shaft system is reviewed and purpose for further study is provided.
总结了近年来国内外对汽轮发电机组转子及轴系弯扭耦合振动问题的研究进展和成果，并对其进一步研究进行了展望。
Nonlinear control method with objective holographic feedbacks (NCOHF) is applied to the coordinated control problem of large turbogenerator set in this paper.
应用目标全息反馈法(NCOHF)来处理大型汽轮发电机组的非线性综合控制问题。
In the process of torsional vibration analysis for turbogenerator rotors, the material characteristics parameters of shafts are often considered to be constant.
在进行汽轮发电机组轴系扭振分析时，通常假设轴系材料特性参数为常数。
The example of calculating the excitation field at no-load for a large turbogenerator shows that the advantages of arc elements are highly accurate and easy to use.
对大型汽轮发电机空载磁场的实例计算表明，圆弧边界单元具有剖分简单、精度高等优点。
The torsional stiffness of a large turbogenerator rotor body and the factors influencing the stiffness are studied systematically in by using the finite element method.
本文利用有限元数值计算方法，系统研究了发电机转子本体部分的扭转刚度及其主要的影响因素。
The technique and its principle of high temperature strain measurement are introduced to determine heat sleeve stress about rotor retaining ring of large turbogenerator.
本文简要介绍了高温应变测量原理和技术在大型汽轮发电机转子护环热套应力测试中的成功应用。
The technique and its principle of high temperature strain measurement are introduced to determine heat sleeve stress about rotor retaining ring of large turbogenerator.
本文简要介绍了高温应变测量原理和技术在大型汽轮发电机转子护环热套应力测试中的成功应用。
应用推荐