This means that the design will usually have only published values of yield strength, ultimate strength, and percentage elongation.
这就是说，设计人员通常只能利用那些公开发表的屈服强度、极限强度和延伸率等数据资料。
The formulas to calculate the yield and ultimate curvature of beam are worked out considering the action of the stirrup, and the accuracy of the formula was proved by experiment.
提出屈服曲率和极限曲率(并考虑箍筋影响)的计算公式，与试验结果作比较，验证公式的有效性。
Using plastic yield line theory, three yield line patterns are analysed and the formulas of the ultimate bearing capacity are obtained.
采用塑性铰线理论，对三种可能的塑性铰线形式分别进行分析，得到极限承载力的解析式。
The moment-curvature relationship chosen is assumed to have a horizontal branch beyond yield, with the moment remaining constant at the ultimate value.
所选用的弯矩-曲率关系是假定超过屈服后有一个水平段，即弯矩保持在极限值不变。
Attaching amino acid to the resin is the sticking point in the whole synthesis, because it has the most important effects on the yield and purification of ultimate product.
第一个氨基酸与树脂连接反应是整个合成过程中最关键的反应，它的好坏直接关系到最终产品的产率和纯度。
Cracking load, yield load and ultimate load are obviously higher.
开裂荷载明显提高，屈服荷载和极限荷载均显著提高。
The most equivalent stress of the ground supporting frame and the large reaction wall under the action of the ultimate load was less than the yield strength.
地面支承架和大反力支承架在极限荷载作用下的最大等效应力均小于材料的屈服强度。
Field testing has show that a 12-hour wastewater retention time will yield four to six months of continuous operation before removal of sludge for ultimate disposal.
现场试验表明在污泥去除最终处理前12个小时的保持时间可以产生4- 6个月的连续运行。
Ultimate load designs according to the yield-line or strip methods do not guarantee safety against cracking or excessive deformation.
接屈服线法或条带法的极限荷载设计不能完全保证抗裂或防止过度变形。
The results indicate that the ultimate tensile strength of AM60B increases prominently with the increasing of RE, the yield strength and elongation are also improved.
结果表明，AM60B的抗拉强度随着RE的增加有显著提高，屈服强度、伸长率也有所提高。
The highest yield (59.23%) was achieved by fermentation, with which the ultimate dietary fiber was 82.7% and the Soluble dietary fiber was 18.8%.
生物发酵法处理原料，得率最高，达到59.23%，总膳食纤维含量和水溶性膳食纤维含量分别为82.7%和18.8%。
Draw the conclusion that the relationship between the shear yield strength and yield strength, between the ultimate shear strength and the ultimate strength.
总结出剪切屈服强度和拉伸屈服强度，最大剪切强度和抗拉强度之间的关系。
In the invention, the cracking load, the yield load and the ultimate load of the reinforced concrete beam pasted with the basalt fiber fabrics are improved.
本发明中粘贴玄武岩纤维布后的钢筋混凝土梁，其开裂荷载、屈服荷载和极限荷载均有提高。
The largest value being that of the ultimate strength. Not every area of the cross-section will have exceeded the yield strength.
在最大程度上利用了材料的强度并不是截面的每一处都已经超出了屈服强度。
The results show that the ultimate tensile strength and yield strength of the alloys rise but the total elongation decreases as the temperature of quench medium drops.
结果表明：随淬火介质温度的降低，淬火降温速率提高，合金的强度增加，塑性下降；
Yield strength and ultimate tensile strength, work hardening exponent and normal anisotropy of plastic strain ratio decrease but planner anisotropy of plastic strain ratio increases.
屈服强度、抗拉强度、加工硬化指数和塑性应变比厚向各向异性降低，塑性应变比平面各向异性增大；
To ignore adversity is to yield to the ultimate self-delusion.
忽视逆境其实就是在欺骗自己。
To ignore adversity is to yield to the ultimate self-delusion.
忽视逆境其实就是在欺骗自己。
应用推荐