The ultimate strength of doubler plate is studied.
研究了加强版的极限强度。
This will show us the ultimate strength of this technology.
这将给我们展示这个科技的强度极限。
This will show us the ultimate strength of this technology.
这个科技最终展现了它强大的场强。
The load is applied in increments until ultimate strength is reached.
按增量形式加载，直到达到极限强度。
Reliability analysis of ultimate strength of plates with initial impact.
具有初始缺陷板元的极限强度可靠性分析。
Test study is the most important research method of ultimate strength of joints.
试验研究是研究节点极限承载力性能最重要的方法。
Test study is the most important research method of ultimate strength of tubular joints.
试验研究是研究钢管节点承载力性能的最重要的方法。
The ultimate strength of the repair is dependent on the number and size of the sutures placed.
最终修复的强度取决于缝线的数目和号码。
The effect of fiber shape on ultimate strength is analyzed and simplifying suggests are given.
进一步分析了纤维形状对强度的影响，给出了表达式中纤维形状因子的简化取值建议。
The ultimate strength of doubler plate reinforced Y-joints subjected to tension loading in studied.
研究了鞍型板加强的Y型管节点在轴向拉力的作用下的极限强度。
Strength of ship plates plays a significant role for the ultimate strength analysis of ship structures.
船体平板强度在船舶结构极限强度分析中起到十分重要的作用。
The ultimate strength of the structure can be increased as more sections reach their ultimate capacity.
该构造的极限强度可进步跟着越来越多的路段到达他们的最终才能。
At last the interaction of ultimate strength for stiffened panels combined different loads is discussed.
了组合载荷作用下的加筋板极限强度的相互关系。
To the large ship, the relationship between the ultimate strength and the loading capacity is almost linear.
对于大中型船舶，载重量与极限强度基本保持线性关系。
A simplified analysis method for the ultimate strength of ship's hull girder under cyclic bending was proposed.
给出了循环弯曲载荷下船体梁极限强度的简化分析方法。
Based on the method, a simple formula calculating, the ultimate strength of unbonded prestress tendons was deduced.
根据这种方法推导出简便的无粘结预应力筋极限应力计算公式。
Then, residual strength index of damaged ship hulls is given based on extreme loads and ultimate strength calculations.
然后基于破损船体极值载荷和极限强度，给出破损船体剩余强度衡准，并对破损船体临界海况进行预报。
The measured critical value of stability loss for normal and healthy cervical spine is 887n, while the ultimate strength 1457n.
经测量发现，正常颈椎失稳的临界值为887n，极限强度值为1457n。
Soft rock wall of tunnels in deep mining will have large creep deformation when the stress in rock is near its ultimate strength.
在深井软岩条件下，巷道围岩应力状态处于岩石强度极限邻域内，围岩会产生较大的蠕变变形。
The experiment results indicate that GFRP sheet can enhance ultimate strength, peak value and ductility of brick masonry columns.
试验结果表明，GFRP布可以有效地提高砖柱的极限强度、峰值应变与延性；
This means that the design will usually have only published values of yield strength, ultimate strength, and percentage elongation.
这就是说，设计人员通常只能利用那些公开发表的屈服强度、极限强度和延伸率等数据资料。
Those may cause serious disaster. Therefore, studying on ultimate strength and fatigue life of dented riser is of great significant.
所以研究已发生凹陷损伤的立管的极限强度和疲劳寿命有着十分重要的意义。
In recent years several authors have proposed simplified analytical methods to calculate the ultimate strength of unstiffened plates.
最近几年，一些作者提出了计算平板极限强度的一种简化解析方法。
Exceptions include sections with a minimum dimension 1, 0 m or where the stress is not greater than 80% of the design ultimate strength.
例外情况包括有最小尺寸为1.0米或在压力不大于80%的设计强度极限部分。
When strengthened with transverse CFRP, the ductility of the columns improved significantly, and the ultimate strength increased as well.
横向粘贴CFRP能显著地改善偏压柱的延性，柱的承载力也有所提高；
The fatigue and ultimate strength analysis of hull structure with two different butt-welding lines distribution was researched in this paper.
对两种不同对接焊缝布置下的船体结构进行疲劳强度和极限承载能力分析。
According to the testing and studying, ultimate strength, elongation and shrinkage on cross section of two kinds of steel bar were determined.
通过测试研究还得到两种钢筋的极限强度、延伸率和断面收缩率等其他高温力学性能参数。
Then, the compound method is used to assess the hull girder ultimate strength reliability of a bulk carrier subjected to extreme bending moments.
最后，基于极限强度，将该组合方法用于评估散货船在极值弯矩作用下的船体梁安全性。
It is no doubt that all damages will more or less affect in-plane mechanical performances of composite materials, in particular ultimate strength.
各种损伤都会或多或少地对复合材料面内的力学性能产生不同程度的影响，尤其对强度而言更为明显。
Not only the strength at first crack and ultimate strength can be calculated, but the stress-strain curve of composite material can be established.
该理论不仅可以给出复合材料的初裂强度和极限强度，而且还能给出复合材料的应力-应变曲线。
应用推荐