Uniform and compact weld, ultrasonic inspection of welds.
焊缝均匀整齐密实，焊缝用超声波探伤。
A new digital automatic ultrasonic inspection system is presented.
介绍了一种新型数字化超声波自动探伤系统。
The ultrasonic inspection technology of the pipeline axial crack was .
另外，对管道轴向裂纹的超声检测技术也进行了初步研究。
Ultrasonic inspection of the material used for the above mentioned components.
对用于以上部件的材料的超声检测。
The theory and method of ultrasonic inspection signal coupling have filled the country blank.
在超声波探伤信号耦合的理论和方法上，填补了国内空白。
Carotid atherosclerotic plaques were defined by cervical vascular color ultrasonic inspection.
颈动脉粥样硬化斑块经颈部血管彩色超声检查确定。
Ultrasonic Inspection 30 cases Yitou cancer, clinical information on its statistical analysis.
方法：超声检查30例胰头癌，对其临床资料统计分析。
From a certain size, defects of this type can be detected by ultrasonic inspection before delivery.
在一定的尺寸范围内，通过超声波探伤可检测到此类缺陷。
The recognition of surface faults in ultrasonic inspection of oil and gas pipeline is investigated.
研究了石油天然气长输管道内腐蚀超声检测中的表面缺陷识别问题。
This inspection system combines an ultrasonic inspection system and a thermographic inspection system.
这个检查系统结合超声检查系统和热像检查系统。
Pressure equipment; Ultrasonic inspection; TOFD technique; Procedure requirements; Acceptance criteria.
承压设备；超声检测；TOFD；程序要求；验收标准。
All patients of benign breast lesions were accepted follow-up by B-type ultrasonic inspection after 6 months.
所有病理诊断良性病变病人术后6个月始均接受B超随访。
There are mainly two quality inspection techniques of TLP, i. e. radiographic inspection and ultrasonic inspection.
关于瞬时液相扩散焊的质量检测技术主要有两种，射线探伤和超声波检测。
Ultrasonic inspection technology for the narrow section of a weld in low-pressure rotor of steam turbine is studied.
研究汽轮机低压转子焊缝狭窄部位超声波探伤工艺。
Conclusion B-type ultrasonic inspection hysteroscopy is diagnosis, treatment, intrauterine Taigu residue of the most effective way.
结论B超联合宫腔镜是诊断、治疗宫内胎骨残留的最有效方法。
According to the theory of ultrasonic inspection, the principle of flow inspection using multi pulse circulation method was discussed.
根据超声波探测理论，讨论了多脉冲循环法用作非接触式流量检测的原理。
For self-made fittings, the correct use of an ultrasonic inspection unit will play an important role in assuring the inspection quality.
对于自制配件，正确使用探伤装置对保证探伤质量能起到一定的作用。
The technology of ultrasonic inspection is the mature application technology. It is widely used for the inner defect of mechanical parts.
超声波探伤技术是一项成熟的应用技术，在机械零部件内部缺陷检测方面得到了广泛的应用。
As compared with same international detectors used for railway ultrasonic inspection, this new one has 5 new designs that have the highest speed.
通过五项新型设计，该探轮的技术水平应为目前国际同类产品最高速度水平。
The acoustic source of plane circular pistons with the radiating transient pulse wave finds wide application in the ultrasonic inspection and test.
幅射瞬态脉冲波的圆形活塞声源在超声检测中得到广泛应用。
Aimed at internal defect ultrasonic inspection for sculptured surface parts, the paper presented a new nearly arc-length approach to path generation.
针对复杂曲面工件内部缺陷的超声检测，提出了一种新的近似等弧长超声检测轨迹生成算法。
Method of calculation of defect site by ultrasonic inspection of indined plane welding has been described in detail, and formula have also been proved.
详细介绍了在斜面焊口超声波探伤中采用声程调节扫描比例进行缺陷定位的计算方法，并给出了计算公式。
This paper introduces the ultrasonic inspection technics in the butt welded-joints of T91 small diameter tubes, and discusses its technical feasibility.
介绍t 91钢小径管焊接接头的超声波探伤工艺，并就工艺的可行性进行探讨。
This paper introduced the distribution and pattern of two conceal defects in explosive welding stainless clad steel plate and their ultrasonic inspection.
本文主要介绍了爆炸焊接不锈钢复合板中两种隐蔽性缺陷的形态、分布规律以及超声波检测。
Problems in ultrasonic inspection of the welds in the steel space grid structures with bolted joints are analyzed in combination with practical inspection.
结合检测实践，对螺栓球网架焊缝超声波探伤技术应用中的若干问题进行了探讨。
According to the technology and configuration of the vacuum braze welding metal honeycomb parts, the technique of ultrasonic inspection for them was studied.
针对金属蜂窝真空钎焊件的工艺及结构特点，探讨了利用超声波法对其质量进行检测的可行性和可靠性。
A practical and effective ultrasonic inspection method for detecting internal flaw of brake disc is put forward and the key procedure is to select a proper probe.
提出运用超声检测的方法检测制动盘内部缺陷是切实可行的，而选择合适探头是超声检测成功的关键。
In the field of non destructive testing, the ultrasonic inspection of neoprene coated is a new and developing technique which has not been used in domestic so far.
橡胶涂层的超声检验在无损检测领域中是一门新兴技术，在国内尚未得到应用。
By cleaning molten steel, controlling casting temperature and withdrawal speed, the compliance ration in ultrasonic inspection of plate was enhanced from 82.5% to 92%.
采取提高钢质纯净度、控制浇注温度和拉速等改进措施，检测合格率由82.5%提高到92%。
By cleaning molten steel, controlling casting temperature and withdrawal speed, the compliance ration in ultrasonic inspection of plate was enhanced from 82.5% to 92%.
采取提高钢质纯净度、控制浇注温度和拉速等改进措施，检测合格率由82.5%提高到92%。
应用推荐