An automatic ultrasonic testing system for zirconium alloy bars was designed.
设计了一种适用于锆合金棒的超声波自动检测系统。
A high-powered ultrasonic testing system based on ARM and DSP was provided, and the circuit conjunction of the main interface was analyzed.
提出了一种基于ARM与DSP方案的高性能超声探伤仪，并分析了关键接口电路。
A digital ultrasonic testing system was developed and different methods were applied in different occasions according to their own characters.
就超声检测遇到的噪声问题提出了数字超声系统，对不同噪声采用不同的处理方法。
Based on the above two aspect's request, this article proposed blanking in constant weight based on the machine vision and the ultrasonic testing system.
基于以上两方面的要求，本文提出了基于机器视觉的等重下料与超声探伤系统。
In this paper, the liquid level measurement of sealed air-condition compressor is introduced and an ultrasonic testing system based on virtual instrument is developed.
文章介绍了对封闭式空调压缩机的液位测量，研发了基于虚拟仪器技术的超声波检测系统。
A new ultrasonic testing system has been developed for application to stator insulation of large generator. It provides A-scan signals and C-scan map for tested specimen.
自行研制了大电机定子绝缘超声波检测系统，它能同时显示被测试样的A扫描脉冲回波和C扫描平面图。
The reliability of automatic ultrasonic testing depends on the performance of ultrasonic testing system. Some aspects related to the reliability of automatic testing systems have been considered.
影响超声自动检测可靠性的因素主要是检测系统本身的设计是否周密、合理及实际工作中系统的状态。本文对影响超声检测可靠性的一些问题进行了分析。
On-line testing shows that, this digital ultrasonic peening power supply based on DSP can make the system work at the resonance state, and the peening process is stable.
联机试验表明，本文研制的基于DSP的数字化超声冲击电源可以使系统工作在谐振状态，冲击过程稳定。
The principles of AI, including its definition, basic study contents, study areas and approaches are interpreted and a basic AI system used in ultrasonic testing (UT) is illustrated.
论述了人工智能的原理，包括其含义、研究的基本内容、研究领域及研究途径，然后给出了人工智能系统在超声检测(UT)中的应用示例。
For the continuous and automatic testing with high precision, we designed an ultrasonic automatic test system for annular work-pieces.
为了实现了高精度电子束焊缝连续自动检测，开发了针对环形工件的智能超声自动化检测系统。
Virtual ultrasonic testing (UT) training system VUTS was developed based on virtual reality. The function structure and realization of the system were described.
利用虚拟技术构建虚拟超声检测培训系统VUTS，对其功能、结构和实现方法进行了介绍。
This paper expounds the necessity to recheck instrument anti detector system in ultrasonic testing, and analyzes the causes to neglect the rechecking of the instrument and detector system.
阐述超声波检测中对仪器和探头系统进行复核的必要性，分析了忽视仪器和探头系统复核的原因。
Noise, an important factor which impact on the performance of ultrasonic online testing system, has a direct influence on the signal-to-noise ratio's level of ultrasonic signal acquisition.
噪声是影响超声在线检测系统性能的一个重要因素，对超声采集信号信噪比的高低有直接影响。
PWA-1 automatic ultrasonic phased array testing system developed in our country was introduced, and the future improvement of the system was also described.
对国内率先开发的PWA - 1型全自动相控阵超声检测系统进行了详细介绍，并对该系统的进一步开发进行了展望。
Based on ultrasonic testing principium, a system of ultrasonic automatism testing for copper rods is developed.
采用超声探伤的原理，开发一种速度快、功能强的铜棒超声波自动检测系统。
Development of ultrasonic automatic testing system for gears has the vital significance to guarantee the quality of gears and enhance the reliability of mechanical device.
齿轮超声自动检测系统的开发，对于保证齿轮的质量、提高机械设备的可靠性有重要意义。
The system realized intelligent inspection function of the wheel and ring ultrasonic testing in two on-lines.
本系统实现了车轮、轮箍两条超声波探伤生产线智能化检测功能。
To enhance resolution of Ultrasonic Image System, an ultrasonic transducer used for testing bimetal clad layer was developed.
为了提高超声成像系统的分辨率，研制了用于检测双金属转子复合层扩散焊连接质量的超声换能器。
Introduced one ultrasonic distance testing system based on AT89C52 single-chip microcomputer and mainly described its hardware circuit, software design method and the operating principle.
介绍了一种基于AT 89 C52单片机的超声波测距系统，阐述了超声测距系统的硬件电路构成、工作原理及软件设计方法。
Digital beam forming (DBF) is special for phased array ultrasonic transducer compared to other ultrasonic nondestructive testing and is also the kernel technology of the whole signal-receiving system.
数字波束合成技术是相控阵超声检测相对于其它超声检测所特有的，也是整个信号接收处理系统的核心技术。
Ultrasonic with wetting, professional dehumidification system to ensure testing humidity stability.
超声波加湿，专业除湿系统，确保。
Preliminary test and study showed that phased array ultrasonic system was better in signal-to-noise ratio, more sensitive to defects, wider in testing range and higher in working efficiency...
初步试验和研究表明，相控阵超声无损检测系统比传统单探头超声无损检测具有信噪比高、缺陷分辨力强、有效探伤范围宽以及工作效率高等特点。
Chaos arithmetic is used for reducing noise in leaking system, and a new kind of narrow band ultrasonic testing principle is introduced.
提出了利用混沌算法抑制噪声，采用新型窄频带超声检漏原理来进行泄漏检测的新方法。
To resolve the problems of low sampling and management speed, bad real time performance on traditional ultrasonic testing data-acquisition systems, one new system is designed.
针对传统超声探伤数据采集系统采样速率低、处理速度慢、实时性差的问题，设计了一种高速数据采集系统；
An ultrasonic intellectual testing system is developed for testing internal flaw of railway vehicle axles.
针对铁路车辆轮轴内部的缺陷，研究了一种轮轴超声波智能探伤系统。
With the testing system, the mechanical load is applied and the relationship between the mechanical load and the revolution speed of the ultrasonic motor is studied under the vacuum condition.
通过该装置实现了对超声电机负载力矩的施加以及在真空环境下对超声电机转速、转矩的测量。
With the testing system, the mechanical load is applied and the relationship between the mechanical load and the revolution speed of the ultrasonic motor is studied under the vacuum condition.
通过该装置实现了对超声电机负载力矩的施加以及在真空环境下对超声电机转速、转矩的测量。
应用推荐