The tube formed part of a device called a capillary viscometer used to measure viscosities.
这个试管是一个毛细管粘度计的组成部分，该粘度计是用来测量液体粘度的。
Tilt the selected spindle, slide it into the coating sample and carefully attach it to the viscometer.
倾斜所选择的锭子，将其倒到涂层的试样上并小心地附着在粘度计上。
Lower the viscometer until the grooves on the spindle shaft just touches the coating, and recheck the level.
降低粘度计直至凹槽在定子的轴正好接触到涂料上，并重新检查其水平。
Place the viscometer on its adjustable stand and lower it to the level that will immerse the spindle to the proper depth. Make sure the instrument is level.
将粘度计放在可调整的架子上并降低它到能使锭子在合适的深度。保证仪器的水平状态。
The new progress about twin—screw extruders and control technology in reaction extrusion line are described. Some applications of viscometer in this processing technology are introduced too.
介绍双螺杆挤出机的最新进展以及反应性挤出生产线控制技术开发动向；详述粘度计在反应性挤出工艺中的应用。
When measuring rheology with capillary viscometer, several factors which may affect on measuring precision shall be considered.
利用毛细管粘度计测量流变性时，应考虑影响测量精度的几个主要因素。
A simple and practical falling-ball viscometer, which can be applied into the automatic instrument with the need of viscosity control are introduced.
介绍了一种落球式粘度计，具有结构简单、实用的优点，可以应用于需要对粘度进行反馈控制的自动化装置。
This article has described the structure, operation, calibration and application of Zahn viscometer.
介绍了蔡恩粘度计的构造、操作、校正及其应用。
The whole blood viscosity (high and low shearing), plasma viscosity, haematocrit, whole blood reduced viscosity and K value equation were detected with the auto cleaning rotating viscometer.
采用自清洗旋转式黏度计检测高血压患者全血黏度(高、低切)、血浆比黏度、红细胞压积、全血还原黏度和K值方程。
Based on the operating principle of rotary viscometer, the dynamical performance experiment rig of spiral micro robot was fabricated.
基于旋转黏度计工作原理，建立内窥镜机器人动力学性能实验台。
Molecular weight of PVC composite resin was determined by viscometer.
用粘度法测定了复合树脂中pvc的粘均分子量。
A broadened correction method using only single polydispersed polymer sample at the intrinsic viscosity calibration in the experiment of GPC combined with viscometer.
本文提出了一个在GPC -粘度计联用实验中，用单一多分散待测试样进行特性粘度标定时的加宽改正新方法。
In the production of chemical industry, the molecular of high polymers is controlled by online-viscometer, through which the rheology of high polymers is monitored.
在化工生产过程中，在线粘度计通过监控高聚物的流体行为，达到控制它们的分子量的目的。
On the basis and analysis of the principle and procedure of the traditional glass capillary viscometer, a new capillary viscometer is developed and designed primarily.
本文在传统玻璃毛细管粘度计测量方法的分析基础上，初步研制了一种新的适用于低沸点液体特别是混合物粘度测量的金属毛细管粘度计。
The latent curing acceleration of the rareearth organometallic compound (MrAn) for the anhydride/epoxy resin system was studied by DSC, TG and rotation viscometer, etc.
结果表明，这种稀土化合物是酸酐／环氧树脂体系较为理想的潜伏性促进剂。
The viscometer was composed of mechanical rotating parts creating different shear rate, a sample cup and a cone plank.
设计的锥板粘度计由产生不同切变率的机械传动装置、放置血样的试样杯和锥板等装置组成。
The high temperature falling ball viscometer made by authors has been described as well as some results of polypropylene measured with it.
通过高温落球粘度计测量聚丙烯的零切粘度的原理和方法，并报道了用这一方法对电工级聚丙烯原料的零切粘度的实际测量结果。
According to the experimental results with toluene and ethanol, the error of the viscometer has been less than 10%, and the further improvement work is under developing.
通过用甲苯和无水乙醇，作者对初步研制的金属毛细管粘度计进仃了检验，试验结果表明，粘度测量的误差已经可以控制在10%以内，进一步的研究工作正在继续。
To measure the indexes of coagulation function and hemorrheology using LG-R-80type cone-plate viscometer and CA1500type automatic programming coagulation analyzer.
以LG-R - 80型锥板式黏度计和CA1500型血液凝固分析仪测定血液流变性及凝血功能各项指标的变化。
The indigrient's change in coating finishing, the ink viscosity and flocculate structure were analysed. The experiments also showed the effect of parallel viscometer on fluidity.
分析了表饰剂中溶剂的组成变化，测定了溶剂的挥发率对表饰剂粘度、形成絮凝结构强弱及平行板粘度表征的表饰剂的流动性的影响。
MMA transforming rate is measured using waterless ethyl alcohol, and molecular weight of PMMA is measured using Ubbelodhe viscometer.
利用无水乙醇对MMA的转化率进行了检测，采用乌氏粘度计对聚合产物聚甲基丙烯酸甲酯(PMMA)的分子量进行了检测。
A comparative study on relations for viscosity coefficient of a liquid determined by eddy-canister viscometer is presented and some errors therein are pointed out.
对文献中转筒法测液体黏度的几个关系式进行了比较研究，指出了其中的问题。
The Model SPC/L372J is a flow-through viscometer that is installed in laboratory and process fluids to provide continuous temperature and viscosity tracking.
L 372J探头是一种流过型粘度计，可以安装在实验室和生产过程中，用来不间断提供流体的温度和粘度追踪。
The Model SPC/L301 viscometer has a 1 1/4" NPT thread to easily install into a process line using a "Tee", or into a large tank or pipe, using a weld ferrule.
L301型粘度计有一个1/4”NPT的螺丝配合一个T型的管道，可以很容易的安装到管线上，或者用一个焊接套环，安装到大罐子或管道内。
Continuously measuring viscosity at high temperature requires a special breed of viscometer.
连续测量高温粘度需要特殊品种的粘度计。
The Model SPC/L301 is an in-line process viscometer that is installed in process fluids to provide continuous temperature and viscosity tracking.
L 301型探头是一种内嵌式粘度计，这种粘度计可以安装在生产过程中，不间断的检测粘度的温度和粘度。
The Model SPC/L301 is an in-line process viscometer that is installed in process fluids to provide continuous temperature and viscosity tracking.
L 301型探头是一种内嵌式粘度计，这种粘度计可以安装在生产过程中，不间断的检测粘度的温度和粘度。
应用推荐