The "Walking Beam" ( D ) should be level.
“走出梁”（四）应水平。
The heat flux to slab surface of a walking beam reheating furnace is simulated.
以某轧钢厂的一座步进梁式加热炉为例，对其钢坯表面热流进行了模拟计算。
The steel plate that is attached to the end of the walking beam on a beam pumping unit.
固定于游梁式抽油机游梁端部的钢板。
Continuous walking beam type reheating furnace is main heating equipment of heavy plate mill.
步进式加热炉是宽厚板生产的主加热设备。
The steel beam that connects the rotary counterbalance with the walking beam on a beam pumping unit.
在游梁式抽油机上使旋转的平衡块与游梁相连的钢杆。
The paper discusses the production potential of walking beam slab furnace at Hot Rolling Plate Plant of Pangang.
探讨了攀钢热轧板厂步进梁式板坯加热炉的生产潜力。
By adopting the appropriate process measures, the qualified walking beam casting has been successfully produced.
通过采取适当的工艺措施，成功地生产出了合格的活动横梁铸件。
Walking Beam and Pusher Type furnaces are used typically for the heat treatment of tubes, bars, billets and slabs.
步进梁炉和推进式炉特别适用于管，棒，平板的热处理工艺。
In this paper, the technical scheme of vertical stepping device used in walking beam heating-furnace was discussed.
本文介绍了步进梁式加热炉汽化冷却系统中的步进装置采用立式结构的技术方案。
Counterweights on the walking beam are used for shallow Wells and they can be adjusted by moving them along the beam.
在游梁上的平衡块用于浅井，并可沿游梁移动平衡块进行调整。
The technical problems related to improvement on design and operation of walking beam furnace are described and discussed.
本文仅就改进步进式加热炉的设计与操作的有关技术问题进行了论述。
The transverse and longitudinal snaking displacement of billets in walking beam furnace is an important furnace performance index.
钢坯在炉内的横向跑偏和纵向跑偏位移量，是步进式加热炉设备的重要性能之一。
The invention discloses water beam overhauling equipment of a walking beam type heating furnace and an overhauling method thereof.
本发明公开了一种步进式加热炉水梁检修设备及检修方法。
The AD valve is a key element of the hydraulic system in the walking beam, whose performance depdnds to a great extent on the valve.
AD阀是步进梁液压传动系统的关键性元件，其性能对步进梁的运动特性影响很大。
This paper described the application of double cross limiting range combustion control system in the walking beam reheating furnace.
介绍了双交叉限幅燃烧控制系统在唐钢步进式轧钢加热炉上的应用。
To introduce the advanced principle of walking beam furnace and the advanced process of controlling heating furnace burning with PLC.
介绍了先进的步进梁式加热炉的工作原理及全部采用PLC控制加热炉燃烧的先进工艺。
The horsehead is shaped so that the curvature of the outer side of the horsehead is centered on the center bearing of the walking beam.
驴头的造型使得驴头外侧的弯曲中心对准游梁轴承。
The heat flux to slab surface of a walking beam reheating furnace along length of the furnace is computed, and total heat exchange factor is also calculated.
以某轧钢厂的一台步进梁式加热炉为例，计算了钢坯表面热流沿炉长方向的分布，并反算求解总括热吸收率。
It is located on a rotary crank on a crank-balanced pumper and can also be located on the walking beam on the end opposite the well on a beam balanced pumper.
在曲柄平衡抽油机上平衡块位于旋转的曲柄上，而在游梁平衡抽油机上平衡块位于井的相对一端的游梁上。
Change walking beam guide structure from slide bush type to glide orbit type, make walking beam move more dexterously and nimble, and with good movement rigidity.
行走梁移动导向结构由以往的滑套式改为滑动导轨式，便得行走梁运行更轻巧、灵活，运动刚性好。
According to analysis of multiple radiation in furnace, the method determined for optimum gap of billet arrangement in walking beam or bottom furnace was reported.
本文从炉内辐射传热角度出发，阐述了步进式炉坯料摆放最佳间隙的确定方法。
The effect and the cause of the falling off accident of the walking beam furnace translation guide rail were analyzed and the improvement method was bringed forward.
文章分析了步进式加热炉平移导轨脱落事故造成的危害和产生的原因，并提出了改进措施。
The basic thermology theory of optimized model is stated, its construction process when used in the model of walking beam furnace is analyzed with mathematics method.
文章阐述了优化加热模型的基本传热学原理，并用数学的方法剖析了此模型的建立过程以及应用到步进式加热炉中数学模型的建立过程。
Taking the rod string as the object of study, a method of computing pumping stroke and speed of walking beam pumping units for slant straight wells is also presented.
以抽油杆柱为研究对象，论述了斜直井游梁式抽油机冲程和冲次的计算方法。
The equipment is suitable for water beam overhauling of any walking beam type heating furnace, can effectively save overhauling period and reduce overhauling quantities.
本发明适用于任何步进式加热炉水梁检修，能有效节约检修工期并减少检修工程量。
The basis design thought of walking of walking beam furnace attached to the bar and wire rolls is introduced. The main parameters and technical measures are stated in detail.
介绍了棒线材轧机用步进梁式加热炉设计的基本思想，并通过具体实例对主要参数的确定和采取的技术措施详细地加以阐述。
This paper introduces the advanced technics, burning device and digital technology of application in production that are applicated in the design for walking beam heating furnace.
介绍了步进梁式加热炉在设计中采用的先进工艺、先进燃烧装置(专利)及数字化燃烧技术等。
For the furnace designing, the construction of walking beam, beam aligning device, self accorded slag removing facility, automatic billet alignment and hydraulic system are discussed.
在设计方面，论述了步进梁结构、定心装置、自动排渣结构、钢坯自动对中设施以及液压系统等。
The thermal status model is established according to a certain walking beam reheating industrial furnace and the flow field, combustion and heat transfer condition in the furnace are simulated.
本文通过对轧钢步进梁式加热炉内热工状态建模，并对炉内流体流动、燃烧化学反应、传热过程进行了模拟仿真。
The thermal status model is established according to a certain walking beam reheating industrial furnace and the flow field, combustion and heat transfer condition in the furnace are simulated.
本文通过对轧钢步进梁式加热炉内热工状态建模，并对炉内流体流动、燃烧化学反应、传热过程进行了模拟仿真。
应用推荐