When motion low noise, wear-resisting, high speed movement.
运动时噪音低、耐磨，可高速运动。
Adopt wear-resisting backing board plate coated with chromium.
采用镀铬耐磨垫板。
Use the wear-resisting ceramic tile instead of the formerly board wear-resisting way.
改变以往耐磨衬板耐磨方式，采用贴耐磨瓷砖方法。
Convenient replace and maintain with the design of wear-resisting track and modularization.
采用精密耐磨轨道及模块化设计，更换维修方便使用。
Application: As wear-resisting lining of coal-electing equipment on coal industry (i. e. cycione)
应用领域：煤炭行业选煤设备耐磨内衬（入旋流器）。
Second, it is wear-resisting, replaceable, so greatly extend the service life of the driving part.
二是耐磨、可更换，大大延长了传动部件的使用寿命；
Mainly used in welding low carbon steel, alloy steel, stainless steel, wear-resisting steel and cast iron.
主要用于低碳钢、合金钢、不绣钢、耐磨钢及金属材料的焊接。
A brief introduction for applied situation, applied effect and applied prospects of wear-resisting in washery.
介绍了抗磨材料在选煤厂的应用情况、应用效果以及应用前景。
The excellent wear-resisting properties of composite auxiliary spring with wear-resisting structure were proved by experiments.
实验证明具有防磨结构的复合材料副簧两端耐磨性能良好。
The ultra thick texture brings extraordinary enjoyment, has impeccable wear-resisting, anti-strike and anti-scratch performance.
超厚的质感带来非凡的享受，具有无可挑剔的耐磨、抗打击和防刮擦性能。
The experimental results showed that Boron carbide appeared to be a new kind of corrosion-resisting and wear-resisting materials.
同时碳化硼材料也是一种抗腐蚀、抗磨损的新材料。
The spraying material is abundant and it endows workpieces with wear-resisting, anticorrosive, temperature-resisting capabilities and so on.
它的喷涂材料丰富，能赋予工件表面以耐磨、耐蚀、抗高温等多种功能，并且工艺及操作简便。
The aluminum alloy caterpillar track, the friction factor is small, pulls the piece to be smooth, sur - stainless steel wear-resisting frame.
铝合金链轨，磨擦系数小，拉片平顺，外加不锈钢耐磨边框。
Objective To improve the function of the wear-resisting of PMMA resin denture through depositing the film of diamond like carbon (DLC) on the surface.
目的在PM MA树脂义齿表面沉积类金刚石碳(dlc)膜改善义齿的耐磨性能。
The Shandong bright emery factory is the specialized production emery anti-friction material, the wear-resisting grounds around a house emery Manufacturer.
山东光明金刚砂厂是专业生产金刚砂耐磨材料、耐磨地坪金刚砂的生产厂家。
The results show that the carbide networks in microstructure tend to break, and fracture toughness and wear-resisting properties of the alloy were improved.
结果表明，变质处理后钨合金白口铸铁的微观组织中碳化物网络断裂，其抗冲击韧性和耐磨损性能显著提高。
The decelerator of precision fabrication, with the worm gear pair made of high-quality special alloy, guarantees the machine wear-resisting and ultra quiet.
精密加工制造的减速器，蜗轮副采用高品质的特殊合金，保证整机耐磨损，超静音。
Especially the gear shell material for high strength reinforced polyamide, and the high humidity craft processing and become more wear-resisting, more durable.
尤其是其齿轮壳的材质为高强度增强尼龙，并经高湿工艺处理而变得更耐磨、更耐用。
Especially the gear shell material for high strength reinforced polyamide, and the high humidity craft processing and become more wear-resisting, more durable.
尤其是其齿轮壳的材质为高强度增强尼龙，并经高湿工艺处理而变得更耐磨、更耐用。
Performance: Concretion hardens quickly, early strength high, wear-resisting, anti-frozen strong, the flowability good, the rate of strength development stable.
性能：凝结硬化快，早期强度高，耐磨、抗冻性强，和易性好，强度增进率稳定。
This paper analyses on the causes of peeling of wear-resisting concrete floor plate of a certain engineering, and puts forward some corresponding treating methods.
分析了某工程耐磨混凝土楼面起壳的原因，并提出了相应的处理方法及建议。
Chain device USES caterpillar chain, and chain plate adopts double circular and single circular arc form two, which is impact resistance, wear-resisting, no leakage.
链条装置采用履带链条，链板采用双圆弧和单圆弧两种搭接形式，抗冲击，耐磨顺，不漏料。
Especially the gear shell material is high strength reinforced polyamide, treated by the high humidity craft processing and become more wear-resisting, more durable.
尤其是其齿轮壳的材质为高强度增强尼龙，并经高湿工艺处理而变得更耐磨、更耐用。
It selects cotton blended fabric raw material, technique of polyester cotton fabric, no lining, gray, resistance dirty wear-resisting, tooling in the finest selection.
它选用棉混纺布原料，全技术涤棉布料，无里衬，灰色，耐脏耐磨，是为工装中的上等挑选。
Utilize laser cladding prepare ceramic compound in the coating in low-priced low carbon steel surface, can obtain high hardness, wear-resisting, anti-corrosion composite.
利用激光熔覆技术在廉价的低碳钢表面制备陶瓷复合涂层，可以获得高硬度、耐磨、耐蚀的复合材料。
The results show that by using spray and strong breeze quenching, heavy-calibre wear-resisting bend pipe made of low alloy steel may easily arrive a good quenching effect.
结果表明，大口径低合金钢耐磨弯管采用雾风冷却可以方便地得到满意的淬火冷却效果。
In addition, it introduces briefly the nitrogen and carbon co-penetration at low temperatures after the alloy plating for improving the wear-resisting and application results.
对电镀合金后进行低温氮碳共渗，提高渗层耐磨性能以及模具中的应用效果也作了扼要介绍。
The synthesis, structures, properties, characteristics, and applications of transparent wear-resisting silicone resins in various industries have been generalized in the article.
概述了耐磨透明硅树脂的合成、结构、性能、特点及其在各行业中的应用。
In order to overcome this weak link in the dregs thick liquid expulsion system, we have designed and made a simple wear-resisting bend, using hydromechanics knowledge, to solve this problem.
为了克服渣浆输送系统中这一薄弱环节，运用流体力学中的伯奴利方程及其他知识而设计和制造的简易耐磨弯头解决了这一问题。
At the same time, the turn-around ring of the hammer head is made of special composite material, with the qualities of wear-resisting, self - lubricating, non-maintaining, easy changing etc.
同时锤头回转圈采用特殊复合材料，具有耐磨、自润滑、免维护、易更换等特点。
应用推荐