The winding tension can be adjusted at ease in pre-take-up roller.
卷绕张力可以在超喂罗拉上任意调节。
Winding tension and winding speed are two key parameters in winding.
络筒张力和络筒速度是络筒中重要的两个工艺参数。
The importance of winding tension control to increase the developed fiber strength is discussed.
讨论了缠绕张力控制对提高纤维发挥强度的重要性。
The temperature parameter of the elements is employed to control the winding tension to respected values.
缠绕过程中缠绕带的缠绕张力采用温度参数法控制，使其达到预定值。
The structure of winding tension control systems and the principle of magnetic power brakes are introduced.
介绍了卷取机的张力控制系统结构，研究了磁粉制动器原理并推导出其数学模型。
During the produce of the sweater, the winding tension and waxing will have a remarkable effect on fabric quality.
在毛衫生产中，络纱张力和上蜡工艺对纱线准备的影响尤其显著。
The winding tension can be adjusted on the pre-take-up roller, therefore, it is also applied to winding of loose dyeing;
卷绕张力可以在超喂罗拉上任意调节，因此也适用于染色松弛柔软的卷绕；
This paper introduces the control principle of the filament winding tension control system and the design method of the hardware and the software.
介绍了纤维缠绕张力微机系统的控制原理及硬件、软件的设计方法。
Winding slitting process requirements set parameters and the change of the diameter of the winding tension by PLC automatic control, digital taper.
根据分切工艺要求设定的参数和收卷直径的变化，按数字化锥度方式自动控制。
This thesis discusses winding tension control based on Fuzzy Adjusting theory, gives the design of Fuzzy PID controller and the experimental results.
本文研究模糊自整定pid的交流驱动收卷张力控制，给出控制器的设计及实验结果。
To resolve the problems of inaccurate control of sizing speed, dry can temperature and beam winding tension of JSSJ-83 sample sizing machine, innovation of it was done.
为解决JSSJ- 83型小样浆纱机浆纱速度、烘燥温度、织轴卷绕张力控制不准确的问题，进行了技术改造。
For simulation of winding tension control system using computer, the parameters about system design and the system performance with these parameters can be quickly obtained.
采用计算机对卷取张力控制系统仿真，可以快速获取系统设计参数和这一参数时的系统性能，使现场调试变得方便快捷。
By improving PP melt rheological properties, adjusting draw-texturing process, controlling winding tension and oil content, the crimping property of PP - BCF yarn can be improved effectively.
通过改善聚丙烯熔体的流变性能、调整拉伸和变形工艺、控制卷绕张力和油剂加入量，可有效地提高丙纶bcf的卷曲性能。
The paper presents the affixture machine winding tension control and deduced mathematic model. The cascade PID control system of testing components is used. It is simulated by MATLAB and SIMULINK.
介绍了复贴机卷绕机构恒张力控制的基本原理和数学模型，并提出了串级PID控制策略，运用计算机仿真工具MA TLAB及其SIMULINK进行仿真调试。
Tension control is one of the key techniques of the winding process for linear, strip and area elastic materials, it affects the quality of winded products directly.
张力控制是线状、带状及面状弹性材料缠绕工艺中的一项关键技术，它直接影响到缠绕制品的质量。
The tension control is the key technique in the filament winding process to guarantee the product quality.
纤维缠绕中张力的控制是关系到产品质量的关键技术。
Next, according as no - gyrating round fiber winding theory and concrete request of vane, analyzing the winding technics, found the mathematics model of tension control system.
根据非回转体环向缠绕理论及叶片产品的具体要求，分析缠绕工艺，建立了张力控制系统的数学模型。
The paper studied the tension control system for NC Filament Winding Machine with magnetic particle clutch as the tension actuator based on the tests.
文章在实验的基础上，对以磁粉离合器为执行元件的数控纤维缠绕机精密张力控制系统进行了深入的探讨与研究。
Therefore, it is of great importance to equip an accurate tension controller on numeric control winding machine.
由此可见，性能优良的数控缠绕机必须配备精确控制张力的张力控制器。
In this paper a set of tension formulas for composite winding outside thin wall cylinder are established according to theory of cylinder shell.
本文按圆柱壳理论建立了一套在薄壁圆筒外缠绕复合材料的张力公式。
The tension control system using permanent-magnet DC torque motor as executive component is design. It can inspect and adjust tension at real-time during winding.
设计了以永磁式直流力矩电动机为执行元件的张力控制系统，它能够实时检测和调整缠绕过程中纤维的张力。
When the winding mode of flyer lead are used on the high speed fly frame, the principle for reducingcentrifugal tension, consumption of energy and others have been analysed.
本文对高速粗纱机采用翼导卷绕方式，在减小离心张力，降低能耗等方面的原理进行了分析。
Referenced to the capacitor winding machines, we made a tension control system with the single -chip micro-computer and designed a fuzzy controller.
参考电容器卷绕装置制作了由单片机控制的张力控制系统，并设计了模糊控制器。
The actual winding results show that the formula drawn is proper and reasonable, and the fluctuation rate of the yarn tension is lower than 5%.
经过实际缠绕证明，所推导的公式是正确合理的，保证了纱线张力的波动率小于5 %。
This paper presents a torque control model for variable tension with automatic on-line calculation of winding diameter in winding drive inverter.
提出了一种卷绕传动中利用变频器实时完成卷径自动计算的变张力转矩控制模式。
Adjusting filament tension by static friction during the course of winding, high tension of winding filament is controlled precisely with little wear and tear to it.
该系统采用静摩擦施力方式给行进中的缠绕纤维施加和调整张力，在对纤维损伤较小的情况下，实现了缠绕纤维的高张力高精度微机控制。
Experimental results show that the wire winding system can realize constant wire tension control.
实验结果表明，新型走丝系统实现了电极丝的恒张力控制。
This article analyses the change of hairiness in yarn processing. through a series of experiments the influence of yarn winding speed tension and clearing setting on its hairiness was studied.
摘要分析了毛羽在纱线加工过程中的变化，通过试验，研究了络筒工序络纱速度、络纱张力和清纱器隔距对毛羽的影响。
A new tension control system integrated into the platform of motion controller is developed in this article for the numerical control system of multi-axes filament winding machine.
本文针对多轴纤维缠绕机数控系统，提出了一种集成于运动控制器平台上的纤维缠绕张力控制系统的方案。
A new tension control system integrated into the platform of motion controller is developed in this article for the numerical control system of multi-axes filament winding machine.
本文针对多轴纤维缠绕机数控系统，提出了一种集成于运动控制器平台上的纤维缠绕张力控制系统的方案。
应用推荐