The importance of winding tension control to increase the developed fiber strength is discussed.
讨论了缠绕张力控制对提高纤维发挥强度的重要性。
The structure of winding tension control systems and the principle of magnetic power brakes are introduced.
介绍了卷取机的张力控制系统结构，研究了磁粉制动器原理并推导出其数学模型。
This paper introduces the control principle of the filament winding tension control system and the design method of the hardware and the software.
介绍了纤维缠绕张力微机系统的控制原理及硬件、软件的设计方法。
This thesis discusses winding tension control based on Fuzzy Adjusting theory, gives the design of Fuzzy PID controller and the experimental results.
本文研究模糊自整定pid的交流驱动收卷张力控制，给出控制器的设计及实验结果。
For simulation of winding tension control system using computer, the parameters about system design and the system performance with these parameters can be quickly obtained.
采用计算机对卷取张力控制系统仿真，可以快速获取系统设计参数和这一参数时的系统性能，使现场调试变得方便快捷。
The paper presents the affixture machine winding tension control and deduced mathematic model. The cascade PID control system of testing components is used. It is simulated by MATLAB and SIMULINK.
介绍了复贴机卷绕机构恒张力控制的基本原理和数学模型，并提出了串级PID控制策略，运用计算机仿真工具MA TLAB及其SIMULINK进行仿真调试。
Tension control is one of the key techniques of the winding process for linear, strip and area elastic materials, it affects the quality of winded products directly.
张力控制是线状、带状及面状弹性材料缠绕工艺中的一项关键技术，它直接影响到缠绕制品的质量。
Next, according as no - gyrating round fiber winding theory and concrete request of vane, analyzing the winding technics, found the mathematics model of tension control system.
根据非回转体环向缠绕理论及叶片产品的具体要求，分析缠绕工艺，建立了张力控制系统的数学模型。
The tension control is the key technique in the filament winding process to guarantee the product quality.
纤维缠绕中张力的控制是关系到产品质量的关键技术。
The paper studied the tension control system for NC Filament Winding Machine with magnetic particle clutch as the tension actuator based on the tests.
文章在实验的基础上，对以磁粉离合器为执行元件的数控纤维缠绕机精密张力控制系统进行了深入的探讨与研究。
The tension control system using permanent-magnet DC torque motor as executive component is design. It can inspect and adjust tension at real-time during winding.
设计了以永磁式直流力矩电动机为执行元件的张力控制系统，它能够实时检测和调整缠绕过程中纤维的张力。
Referenced to the capacitor winding machines, we made a tension control system with the single -chip micro-computer and designed a fuzzy controller.
参考电容器卷绕装置制作了由单片机控制的张力控制系统，并设计了模糊控制器。
To resolve the problems of inaccurate control of sizing speed, dry can temperature and beam winding tension of JSSJ-83 sample sizing machine, innovation of it was done.
为解决JSSJ- 83型小样浆纱机浆纱速度、烘燥温度、织轴卷绕张力控制不准确的问题，进行了技术改造。
This paper presents a torque control model for variable tension with automatic on-line calculation of winding diameter in winding drive inverter.
提出了一种卷绕传动中利用变频器实时完成卷径自动计算的变张力转矩控制模式。
Experimental results show that the wire winding system can realize constant wire tension control.
实验结果表明，新型走丝系统实现了电极丝的恒张力控制。
By operating the technique is advanced and reasonable, thus improves the control precision of tension in filament winding.
经运行证明，该系统技术先进、合理，提高了纤维缠绕中张力的控制精度。
Aviation electric hoist is mainly used for people rescue and material transfer under extreme conditions. However, a tension control system of wire rope winding machine is necessary for safety purpose.
航空电动绞车主要用于极端条件下人员救援或物资运送，为保证安全工作，需加装钢缆缠绕机构张力控制系统。
Therefore, it is of great importance to equip an accurate tension controller on numeric control winding machine.
由此可见，性能优良的数控缠绕机必须配备精确控制张力的张力控制器。
It has been testified that the real time interrupt technology is exact and reliable, thus ensuring the precise control property of yarn tension in the composite product winding technology.
经实际运行证明，所采用的实时中断技术准确、可靠，能够保证复合材料制品缠绕中纱线张力的精密控制性能。
The temperature parameter of the elements is employed to control the winding tension to respected values.
缠绕过程中缠绕带的缠绕张力采用温度参数法控制，使其达到预定值。
A new tension control system integrated into the platform of motion controller is developed in this article for the numerical control system of multi-axes filament winding machine.
本文针对多轴纤维缠绕机数控系统，提出了一种集成于运动控制器平台上的纤维缠绕张力控制系统的方案。
Main subjects discussed in this dissertation focus on the tension control in unwinding and winding processes for the gravure press machine.
本论文具体针对在凹板印刷机运转过程中的收卷放卷张力控制进行讨论与研究。
This paper researches in tension control of filament winding system, which is an important control parameter and affects the quality of winding products directly.
纤维缠绕张力是复合材料缠绕成型工艺中重要的控制参数，直接影响着缠绕制品的质量。
21c auto winder, based on which it claims that mixed loop control represents the development trend of tension control system on automatic winding machine.
21C型自动络筒机的络纱张力自动控制系统进行了深入分析，提出混合环控制是自动络筒机络纱张力控制系统的发展趋势。
The design principle, basic composition and implementing method of tension control system of digital control fiber winding machine are described.
主要论述了数控纤维缠绕机张力控制系统的设计原理、基本构成及其实现方法。
Winding slitting process requirements set parameters and the change of the diameter of the winding tension by PLC automatic control, digital taper.
根据分切工艺要求设定的参数和收卷直径的变化，按数字化锥度方式自动控制。
Next, discussing structuring truth of tension control system, designing that PLC control AC servo-system, achieve may control no- gyrating round fiber winding motion;
讨论了张力控制系统的构成原理，设计了以可编程控制器控制的交流伺服系统，实现该设备的可控非回转体环向缠绕运动；
Take puts the winding up roller as the research object, has made the detailed analysis to its state of motion and a program scheme for calculating the tension control torque was provided.
以放卷辊为研究对象，对其运动状态作了详细的分析，进而给出了计算控制力矩的程序框图。
Take puts the winding up roller as the research object, has made the detailed analysis to its state of motion and a program scheme for calculating the tension control torque was provided.
以放卷辊为研究对象，对其运动状态作了详细的分析，进而给出了计算控制力矩的程序框图。
应用推荐