Drilling: refers to the use of drilling or milling machine drill hole of the workpiece process.
钻孔：指在钻床或铣床上使用钻头对工件进行打孔的工艺过程。
Based on the comprehensive analysis on the causes of accuracy errors induced in workpiece process with Spanish boring lathe, the plan for treatment of machine foundation is put forward.
全面分析了西班牙镗床在加工工件时产生精度误差的原因，确定出相应的治理地基病害的方案。
In the operation process of CNC machining center, the first is based on the design drawings and the technology of machining workpiece processing program, and then enter the CNC machining center.
在CNC加工中心运行过程中，其首先是根据工件设计图件和加工技术进行加工程序的编程，然后输入CNC加工中心中。
The process of a pipe production is the following: a round cast workpiece is put onto a hot rolling line where it is cut, heated, stitched and rolled till a pipe of necessary size is ready.
一个钢管的生产流程如下：圆管坯放在要被切割的高温轧制线上，继续升温，穿孔，轧制直到管坯大小基本成型。
During machining, ultrasonic vibration of workpiece can improve the machining process.
在加工过程中，通过超声波振动，工件加工工艺得到改善。
In this process, metal removal is achieved through combining the rotary motion of the milling cutter and linear motions of the workpiece simultaneously.
在此工艺中，金属去除是通过铣刀的旋转运动和工件的直线运动的组合实现的。
The grinding strengthen technology is a new process engineering of surface heat-treatment, which uses a mass of grind heat produced in grinding process to handle workpiece materials.
磨削强化技术是利用磨削加工过程中产生的大量磨削热对工件材料进行表面热处理的新工艺技术。
Having double close-loop control function may heat rapidly with high efficiency furthest and optimize the heating process of metal workpiece.
拥有双闭环控制功能，最大程度高效快速加热，优化金属工件的加热过程。
To support the principle of triangulation, etc., the rolling process, the workpiece can improve roundness, concentricity, perpendicularity.
以等三角支撑原理，进行滚压加工，可提高工件真圆度、同心度、垂直度。
Because no tool pressures are involved, the process is ideal for machining delicate workpiece.
由于刀具不施压力，因而是切削易碎材料的理想工艺。
This uneven hot and cold process, the workpiece will produce thermal stress.
这种不均匀冷热过程，会使工件中产生热应力。
The system is intelligentized and automated in the process of workpiece rectification.
该系统实现了工件矫正过程的智能化及自动化。
The cutting process was performed through subtraction boolean operation of the solid model of workpiece and cutter.
利用齿坯实体模型和刀具实体模型做布尔减运算，来实现模拟工件材料的去除过程；
The induction heating process of cylinder workpiece was analyzed, and the temperature distribution and its variation with time were obtained.
分析了圆柱工件的感应透热过程，得到了坯料内的温度分布状况以及温度随时间的变化规律。
It also involves when using locating-lock to locate, design and choose the length of Locating-lock have an great effect on locate and process of workpiece.
论述了采用定位销定位时，定位销长度的设计选择对工件加工定位的影响。
Riveted: refers to use of press or hydraulic press to riveted nut, riveted screw or rivet nuts and other fasteners column firmly crimping the workpiece on the process.
压铆：指采用冲床或油压机把压铆螺母、压铆螺钉或压铆螺母柱等紧固件牢固地压接在工件上的工艺过程。
Using liquid crystal display numerically-controlled system, which can organize and store various heat-treating process program according to requirements for different workpiece.
采用液晶显示数控系统，可根据不同工件的要求，编制及储存多种热处理工艺程序。
Combining the craft features of the parts process, the NC generalized program for typical workpiece is worked out with group technology.
并结合加工工件的工艺特点，采用成组技术编制典型工件的NC加工通用程序。
La Mother: refers to the process similar to riveting. Mother with a pull shot to pull rivet nut (POP) and other connectors firmly connected to the workpiece on the process.
拉母：指采用类似铆接的工艺。用拉母枪把拉铆螺母（POP）等连接件牢固地连接在工件上的工艺过程。
Bending: means the workpiece from the press brake forming process.
折弯：指工件由折弯机成型的工艺过程。
Company's production process workpiece has stringent quality control procedures.
公司对工件的制作过程有严谨的质量控制程序。
Tapping: refers to the workpiece within the processing of a thread process.
攻牙：指在工件上加工出内螺纹的工艺过程。
This paper discusses the development of the high-speed cutting technology in respect to the machine tool, cutting tool, workpiece and process.
本文从机床、刀具、工件、工艺等方面讨论了高速切削的技术开发情况。
Processing of the workpiece in the process the situation before.
工件在本工序加工之前的情况。
The electronic workpiece acceleration ensures the quality of the decisive start of the rolling process.
电子控制的工件驱动装置确保了最开键的滚轧起始阶段的质量。
For a workpiece used in expanding the beginning of plastic pipe, We analyse the machining process, workpiece rectifying before machining, and design WEDM processing and its program.
针对扩口器工件的特点进行了线切割加工工艺分析、工件校正及编程设计；
The results show that reasonable process parameters are help for better surface integrity of machined workpiece and decrease wears in the tool.
研究结果表明，选取合理的工艺参数能提高工件表面精度和减少刀具的磨损。
The results show that reasonable process parameters are help for better surface integrity of machined workpiece and decrease wears in the tool.
研究结果表明，选取合理的工艺参数能提高工件表面精度和减少刀具的磨损。
应用推荐