The paper presents a direct method for calculating cutting edge curve of a concave worm hob in worm hob design of worm-gearing, which avoids solving engage equations.
本文对圆柱蜗杆传动的滚刀设计中的刃口曲线的计算提出了一种能避开啮合方程的直接算法。
Worm compressor is an ingenious application of worm gearing in non-power transmissions.
蜗杆压缩机是蜗杆传动在非动力传动中得一种绝妙应用。
A new rolling type of spherical enveloping worm gearing with point meshing is proposed.
提出了一种新型滚动式球面包络点啮合环面蜗杆传动；
It has been proved by practices that the double enveloping worm gearing transmission is superior to the ordinary worm gearing transmission under the same condition.
使用实践证明，在相同的使用条件下，平面二次包络环面蜗杆传动副的传动性能比普通蜗轮蜗杆传动副好。
Within the range of machining, if the helix Angle adopts a bigger value, it may improve the meshing performance and develop the advantages of double enveloping TI worm gearing.
在加工允许的范围内，螺旋角取较大的数值，能够较好地改善啮合性能，从而发挥二次包络TI蜗杆传动的优势。
This paper makes a meshing analysis about the spiroid gearing. Using the method of equivalent worm gearing, the assembly condition of Archimedes spiroid gears has been obtained.
通过锥蜗杆传动副的啮合分析，用当量圆柱蜗杆副的分析方法，得出阿基米德锥蜗杆副的装配条件。
A new numerical computing method suitable for all kinds of cylindrical worm gearing is proposed.
提出一种新的计算圆柱蜗杆副啮合的数值计算方法。
The structure and the working principle of a new kind of hourglass worm gearing, which is called non-backlash hourglass worm gearing, are introduced.
阐述了一种新型环面蜗杆传动——无侧隙双滚子包络环面蜗杆传动的结构和传动原理。
The basic principle of the worm gearing is analysed.
分析了该失配啮合传动的基本原理。
A study on ti worm gearing is significant in theory and valuable in practice for developing a kind of worm reducer with high efficiency and heavy load capacity.
开展TI蜗杆传动的研究对开发研制高效、重载蜗杆减速机具有重要的理论意义和实用价值。
The problem to improve the lubricating performance and to increase the contact strength are important objects in the studys of worm gearing.
改善润滑性能和提高接触强度是蜗杆传动研究的一个重要目的。
A method of modifying the double enveloping worm gearing with developable tooth surface has been proposed to reduce the sensibility of the worm gearing to the manufacturing errors.
提出了对二次包络环面蜗杆传动修形的方法，以降低蜗轮副对制造误差的敏感性。
Based on an example, the mathematical model of multi goals fuzzy reliability optimal design for ZK worm gearing was established. The optimal method and optimal solution on worm gearing were given.
结合实例建立了ZK蜗杆传动多目标模糊可靠性优化设计的数学模型，给出了优化方法及优化参数。
The deformation coordination equation of worm gear for rolling cone worm gearing is introduced, and the formulae of forces analysis and the rolling - and - sliding friction coefficient are given.
本文建立了滚锥包络环面蜗杆传动蜗轮的变形协调条件，给出了该种传动受力分析的计算公式以及蜗轮与蜗杆之间滚滑摩擦系数计算公式；
Finally, on the basis of above mentioned narrations, the paper has studied in detail the failure part: splined shaft, linking bolt, worm gearing.
在此基础上，本文对出现失效的零件：花键轴、连接螺栓、蜗轮这三个具体的零件根据其失效方式进行了详细的分析。
The tooth contact and kinematic precision of the modified worm gearing with manufacturing errors has been investigated by the TCA method.
用齿面接触分析法求解了存在制造误差时修形传动的齿面接触状态和运动精度。
Although the planar double-enveloping worm gearing has advantages of high transmission efficiency, excellent load capacity, long life cycle and so on, it has been used in a limited way.
虽然平面二次包络环面蜗轮副具有传动效率高、承载能力大、使用寿命长等优点，但它的应用却始终受到限制。
The measuring principle, main structure and measured results of the new tester developed for double enveloping worm gearing are present in the paper.
介绍了新型二次包络环面蜗杆副测量仪的结构、原理及实测结果。
A new kind of Angle adjusting device for disk pelletizer is introduced in this paper. It is a manual worm gearing with an Angle indicator.
本文介绍了圆盘造球机的一种新型调角装置，即为具有角度指示器的手动蜗轮蜗杆装置。
To account for the manufacture of offset cylindrical worm gearing, further it studies on the 3d modelling of the offset cylindrical worm gearing.
对渐开线偏置圆柱蜗杆副的制造进行了说明，并对该种蜗杆副的三维造型进行了研究。
To account for the manufacture of offset cylindrical worm gearing, further it studies on the 3d modelling of the offset cylindrical worm gearing.
对渐开线偏置圆柱蜗杆副的制造进行了说明，并对该种蜗杆副的三维造型进行了研究。
应用推荐