标签薄膜溶胶-凝胶工艺外延生长电性能。
BST thin films sol gel technique epitaxial growth electrical properties.
本研究利用改进的溶胶-凝胶工艺合成了介孔硅基干凝胶。
The mesoporous silica-based xerogel had been synthesized using improved sol-gel method.
报道了溶胶-凝胶工艺制备的KDP晶体保护膜、增透膜和它们的性能。
In this paper, we report the preparation and performances of the sol gel antireflective and protective coatings on KDP crystals.
采用溶胶-凝胶工艺，用提拉法在玻璃基底上制备了ITO透明导电薄膜。
The Indium-tin oxide (ITO) films were prepared on glass substrate using sol-gel dip coating method.
为了制备高温气冷反应堆用燃料芯核，致密uo_2微球，研究了一种新的溶胶-凝胶工艺。
A new kind of sol - gel process for preparation of dense UO2 kernels used for HTGR (High Temperature Gas cooled Reactor) has been developed in our institute.
以间苯二酚和甲醛为原料，采用溶胶-凝胶工艺，结合高温碳化和溶剂替换常压干燥技术，制备了碳气凝胶。
Carbon aerogels were prepared from resorcinol and formaldehyde via sol-gel process, high temperature carbonization and atmospheric pressure drying technology with solvent replacement.
在干燥阶段维持凝胶织构可使得干燥凝胶具有一些特殊的性质和用途，也是溶胶-凝胶工艺中的关键问题之一。
Preserving gel texture during the drying step, which is one of the main problems of Sol gel process, can make drying gels have a lot of special properties and applications.
用溶胶-凝胶法和浸渍-提拉法工艺，在玻璃表面上制备了均匀、透明的钇离子(Y3 +)掺杂二氧化钛纳米薄膜。
Homogeneous and transparent thin nanostructured titania films doped by Y3 + were prepared on glass substrates by sol gel processing and dip coating technique.
通过对溶胶-凝胶处理过程采用不同的工艺方法，比较了不同颗粒直径和堆积密度的反应粉末对合成产物中碳化硅晶须形貌和产率的影响。
The effect of reaction powders with different pellet diameter and bulk density on the productivity and microstructure of sic whisker was studied by adopting different sol-gel handling methods.
以丁醇钛、乙醇锆、醋酸铅为原料，采用溶胶-凝胶新工艺，成功地制备出锆钛酸铅陶瓷材料。
Lead Zirconate Titanate ceramic material has been prepared by sol-gel method with Titanium butoxide, Zirconium alkoxide and anhydrous lead acetate.
介绍了几种用溶胶凝胶法制备ito薄膜的工艺方法，用其中一种无机的方法成功制备了ITO透明导电膜。
Several methods of the preparation of ITO thin film with sol-gel technique were introduced. The ITO thin films were gotten by the inorganic method.
介绍了FHA的结构特点、FHA涂层的制备工艺，并重点陈述了溶胶-凝胶技术在制备FHA涂层中的应用。
The characteristic and structure of FHA, preparing methods of FHA coating are introduced in this work. The application of sol-gel technology in preparing FHA coating is emphasized.
提出了磷化钼常压制备工艺，包括溶胶-凝胶法制备负载型磷化钼催化剂前体及在常压下以氢氮混合气为还原剂的催化剂前体还原。
Supported phosphorized molybdenum catalyst precursor was prepared by the sol-gel method, and reduced under atmospheric pressure by hydrogen nitrogen mixture for the first time.
多种工艺可以用来制备透明导电薄膜，如磁控溅射真空反应蒸发、化学气相沉积、溶胶-凝胶法以及脉冲激光沉积等。
Many processes are used to prepare transparent conductive films, such as magnetron sputtering, vacuum reactive evaporation, chemical vapor depositions, Sol-gel, laser-pulsed deposition.
结果表明：溶胶-凝胶自蔓燃工艺对原料纯度非常敏感；
The results show that SAS process was heavily sensitive to the purity of raw materials.
较系统地介绍了溶胶凝胶法制备涂层材料技术的特点及一般原理。概述了溶胶凝胶法制备涂层的工艺过程以及涂层材料的应用。展望了未来的发展前景。
This paper systemically introduced the features, principle, technological process and the application of coating materials, prepared by sol gel process, looked ahead the coming developing prospect.
采用溶胶-凝胶法制备了负载型氮化钼的前驱体，采用流化氮化新工艺制备了氮化钼。
This article took the sol-gel method to prepare the precursor of supported molybdenum nitride, used the fluid nitriding new technology.
本文综述了用溶胶—凝胶法制备择优取向铁电薄膜的工艺方法、特点和机理的最新研究进展；
Preparation and characteristics of preferred oriented ferroelectric thin films derived from sol-gel method are described.
对近年来以溶胶-凝胶法制备纳米氧化镁粉体的几种工艺进行了总结比较，并展望了该法的发展前景。
This paper has summarized the Sol-Gel technologies of preparation for nanometer magnesia powder in the recent years, and the development of this method was discussed in details.
溶胶—凝胶技术的化学过程根据原料不同可以分为有机工艺和无机工艺。
The chemical process of sol-gel technology can be divided into organic and inorganic technology according to the different raw material.
溶胶凝胶工艺尤其适合制作传统的熔融法不能或不易获得的功能陶瓷纤维。
Solgel process was specially suitable for preparing the functional ceramic fibers which was very difficult or even could not be obtained by the conventional melting method.
以硼酸三正丁酯、甲醇锂为主要原料，甲醇和四氢呋喃为溶剂，利用溶胶-凝胶法通过优化工艺制备了掺锂硼酸盐凝胶。
Li2O-B2O3 composite gels were successfully prepared from tri-n-butyl borate and lithium methoxide dissolved in methanol and tetrahydrofuran via sol-gel technique.
介绍了几种用溶胶凝胶法制备ito薄膜的工艺方法，用其中一种无机的方法成功制备了ITO透明导电膜。
Several methods of the preparation of ITO thin film with sol-gel technique were introduced.
用醋酸锂和乙醇钽作为起始反应物，通过溶胶凝胶工艺生成了对红外敏感的钽酸锂薄膜，并详细讨论了基于钽酸锂薄膜的红外探测器件制备工艺。
The LiTaO3 thin film was chosen as infrared sensing film and prepared by a sol-gel process using lithium acetate and tantalum ethoxide as starting materials.
首先，本文重点研究了ITO薄膜的溶胶—凝胶制备工艺。
Firstly, ITO conductive anode films were fabricated on glass tube substrates by sol-gel process.
首先，本文重点研究了ITO薄膜的溶胶—凝胶制备工艺。
Firstly, ITO conductive anode films were fabricated on glass tube substrates by sol-gel process.
应用推荐