微生物法处理电镀废水技术倍受关注。
Nowadays the technology of electroplating wastewater treated by microbiological method has been paid more and more attention to.
本文介绍化学法处理电镀废水的应用实例。
This paper introduces an project case of Chemical Method in Electroplating Wastewater Treatment.
为了有效地处理电镀废水，必须改进电镀工艺。
The plating process must be improved for the sake of wastewater treatment.
但现阶段综合电镀废水的治理缺乏实用经济的工艺。
But we are still short of a practical and economy treatment process aiming at the comprehensive electroplating wastewater nowadays.
膜分离技术在电镀废水处理领域有着良好的应用前景。
Membrane separation technology has wide application in electroplating wastewater treatment.
电镀废水中含氰废水的排放，对环境会造成巨大的危害。
Discharge of electroplating cyanogens-containing Wastewater would cause greatly harm to the environment.
介绍了一个采用螯合沉淀法处理电镀废水的典型工业实例。
A typical industrial example of chelating precipitation to treat electroplating wastewater is reported in this paper.
简介PE过滤器结构、原理及其在电镀废水处理中的应用。
It briefly introduced the PE-filter in terms of construction. operating principle and its application to electroplating effluent treatment.
结合工程实际，介绍电镀废水处理工程的设计及调试情况。
Combining engineering practice, the author gives some experience in design and debugging of the treatment engineering.
对电镀废水处理站的总体设计依据及其内容进行了详细描述。
Basis and content on general design of wastewater treatment station were described in detail.
随着电镀工业的迅猛发展，将会有越来越多的电镀废水产生。
More and more electroplating wastewater is generated with rapid development of electroplating industry.
以某厂为实例，介绍了用一步净化器处理电镀废水的工程实例。
A example of using one step purificator to treat electroplate wastewater in a factory has been described in this paper.
结合印染废水和电镀废水的治理、提出了模块化治理污水的概念。
The article is connected with the treatment of dyeing wastewater and electroplating wastewater. It shows us the conception of modularity wastewater treatment.
论述了氯碱法处理含氰电镀废水的基本原理、工艺条件的选择和调控。
The basic principle, choice and control of process condition of treatment of electroplating effluent containing cyanide by chlorine-alkali method are discussed.
尽管铅不如铜、锌、镉和铭那样常见，但它却是电镀废水中的普通组分。
Lead is also a common constituent of plating wastes, although not so frequently encountered as copper, zinc, cadmium and chromiurn .
试验研究和实际应用结果表明：该工艺是处理混合电镀废水的有效方法。
Research and application results show that the process is an effective method for disposal of mixed electroplating effluent.
而电镀污泥是电镀废水处理后产生的固体废弃物，含有多种重金属元素。
The electroplating sludge is one kind of solid wastes from disposal of electroplating wastewater, including various heavy metallic elements.
为了高效廉价地处理电镀废水，对天然累托石进行处理制备成改性累托石。
Natural rectorite was modified to treat electroplating wastewater with high efficiency and low cost.
为了高效廉价的处理电镀废水，对天然硅藻土进行处理制备成改性硅藻土。
Natural diatomite was modified to treat electroplating wastewater with high efficiency and low cost.
并对南京地区的电镀废水治理技术进行了评价，评价结论与实际情况较吻合。
The results inditated that the appraisal results is quite close to the practical.
在气浮法处理电镀废水的过程中，采用的装置不同，处理的效果也会有所不同。
In the process of waste water treatment by bubble-floating method, its result may differ with the system used.
电镀清洗废水是电镀废水的一种，其成分复杂，毒性较大，直接排放会严重污染环境。
The electroplating washing wastewater is a kind of electroplating wastewater that has complex composition and high toxicity. It would pollute the environment if discharged directly.
产水用途：食品饮料、医药行业工艺浓缩，提纯、RO预处理、涂装、电镀废水回收、矿泉水制备。
Water purpose: food and beverage, medicine, concentration, purification, RO pre-treating, coating, recollecting wastewater caused by plating, and table-water manufacture.
介绍了这种回用系统的工艺流程及工程运行情况，该系统运行稳定，为电镀废水回用开辟了新的思路。
The process flow and engineering operation of this recycling system which runs stably is introduced. It exploits a new way for the reuse of electroplating wastewater.
提供一 种采用脉冲电源和静态电极技术从低浓度含氰含银电镀废水中回收银和分解氰的方法及装 置。
The treatment device comprises an electrolysis bath, a power supply, a circulating pump, an aerator, an electrode group, a tubular liquid distributor and an aeration pipe;
分析了电镀废水的来源、组成及危害，讨论了电镀废水的治理措施，提出了对电镀废水治理发展趋势的看法。
This paper analyzed the source, make up and hazard of electroplating waste water, discussed its treatments, and put forward the opinion of its development trend of treatment in the future.
概括线缆产业主要工艺技术及污染因素，并归纳行业废酸、酸雾、磷化废水、电镀废水、铅污染等主要污染问题的已有治理技术。
Main process technology and pollution factors of wire and cable industry are pointed out. The existing control methods are summarized for such problems as waste acid, acid mist, was...
电镀工业产生的废气、废水、废渣等污染物如果不妥善处置，会严重影响环境，并危及人们的健康。
If Pollutants (such as exhaust gas, wastewater and residue) from electroplating industry aren't disposed well, the environment will be affected and people's health will also be endangered.
电镀工业产生的废气、废水、废渣等污染物如果不妥善处置，会严重影响环境，并危及人们的健康。
If Pollutants (such as exhaust gas, wastewater and residue) from electroplating industry aren't disposed well, the environment will be affected and people's health will also be endangered.
应用推荐