有机过氧化物可用作聚合引发剂。
用途：乙烯基化合物的聚合引发剂。
本发明的体积型全息图记录用感光 性组合物含有光聚合性的体积膨胀性化合物和光聚合引发剂。
Specifically disclosed is a photosensitive composition for volume hologram recording characterized by containing a photopolymerizable, volume-expandable compound and a photopolymerization initiator.
本发明公开了一种聚丙烯接枝共聚物，由一种原子转移自由基聚合引发剂在温和条件下引发聚合制备。
The polypropylene grafted copolymer is prepared through polymerization under mild condition and initiated with one kind of atom transferring free radical polymerization initiator.
为研究阴离子聚合引发剂萘锂络合物是否可引发自由基聚合，进行了萘锂络合物引发醋酸乙烯聚合的实验。
To study the radical character of naphthalene lithium, which is a classical anionic initiator, the polymerization of vinyl acetate was initiated by it.
本文研究了聚合引发剂、甲基丙烯酸酯、不饱和聚酯等浸渍微孔密封剂的几种主要组份对其耐热性的影响。
The effect of some components, such as initiator AIBN, methacrylate and unsaturated polyester, of impregnation microporosity sealants on their heat resistance were studied.
将含聚合引发剂的丙烯酸盐单体水溶液涂布到天然纤维布基材上，在微波辐照下聚合，制得高吸水性纤维复合体。
The complex of super water absorbing resin-natural fabric were obtained by microwave radiation polymerization of natural fabric which dip-coated in acrylic acid and its sodium salt aqueous solution.
研究了单体浓度、引发剂浓度、反应时间和反应温度对接枝聚合物接枝率、凝胶率等的影响。
The influences of concentration of BPO, concentration of monomer, reaction time, reaction temperature were investigated in terms of grafting degree and gel content.
考察了聚合反应条件，如溶剂种类、聚合温度、模板浓度、引发剂用量、转速、预聚合时间等对分子印迹聚合物微球特性的影响。
The effects of reaction conditions were studied, including the kind of solvent, polymerization temperature, the concentration of template and initiator, rotational speed and pre-polymerization time.
引发剂效率引发剂效率定义为，引发剂最初分解形成自由基，并成功引发聚合反应的分数。
The initiator efficiency fis defined as the fraction of the radicals formed in the primary step of initiator decomposition, which are successful in initiating polymerization.
环状产物又在阴离子引发剂联苯双酚钾的作用下进行开环聚合重新得到高分子量的线性产物。
High molecular weight linear products were regenerated after the ring-opening polymerization of the cyclo-products using potassium phenoxide as initiator.
有机过氧化物是烯烃聚合工业中重要的引发剂。
The organic peroxide is a sort of important initiator in alkene polymerization industry.
压克力板工业化试验结果表明，复合引发剂和高低温聚合工艺用于工业化生产是可行的。
Results of industrialized tests of the sheets revealed that composite initiator and polymerization technology at the stage of high and low temperatures used for industrialized production was feasible.
离子聚合的引发剂。
综述了近年来聚乙二醇类大分子引发剂在聚合反应中的应用。
In this paper, recent applications of PEG macroinitiators in polymerization reaction are reviewed.
通过讨论单体配比、合成温度、聚合时间以及引发剂的类型和用量对树脂性能的影响；
The influences of the composition of monomers, the polymerization temperature, and time on the performance of resin were investigated.
引发剂在聚合机理中是重要因素。
Initating agents are essential factors in the polymerization mechanism.
方法考查单体的制备与纯化、溶剂残余量、聚合方式、引发剂用量、聚合时间、聚合温度等因素对聚合的影响。
METHODS Various influencing factors in the preparation of PLA were studied, such as the purity of monomer, the polymerization temperature, and the quantity of the initiator.
简要介绍含二苯酮基的大分子光敏引发剂的合成制备、引发聚合机理及应用方面的研究进展情况。
This paper discusses, the synthesis, photoinitiation polymerization mechanism and applications of polymer photosensitized initiator containing side chain benzophenone chromophores.
乳化剂、引发剂用量及反应温度、反应时间和搅拌速度对乳液聚合反应有重要影响。
The emulsion polymerization also was influenced by the dosage of emulsifier and initiator, reaction temperature and reaction time and agitating speed.
探讨了单体浓度、反应温度、引发剂用量等因素对聚合反应速率和产物特性黏数的影响。
The effects of monomer concentration, reaction temperature, initiator dosage on polymerization rate and intrinsic viscosity of product were investigated.
结果表明，随着反应温度的升高或引发剂的用量增大，聚合物的特性粘度降低。
It was found that increasing the temperature and amount of initiator decreased the intrinsic viscosity of the copolymer.
着重从单体浓度、聚合溶剂、引发剂等条件对共聚合行为进行了探讨。
Various copolymerization conditions such as amount and kind of initiators, concentration of monomers and solvents were examined.
综述了引发剂种类和引发剂的选择，并对引发剂对乳液聚合的影响因素作了分析。
Kinds and choice of initiator were summarized up, and the effect of initiator on emulsion polymerization was analyzed in paper.
考察了热引发方式和不同种类、浓度下的引发剂引发方式在苯乙烯的本体聚合中对聚合反应速率和产品的分子量及其分子量分布的影响。
The effects of initiators and thermal initiation on a reaction rate, molecular weight and molecular weight distribution of products in a mass polymerization of styrene were investigated.
以丙烯酰胺为单体，加入有机硅交联剂、引发剂过硫酸钠、反应速度调节剂，制得聚合物堵水剂hy。
The polymer water shutoff agent HY was prepared using acrylamide as monomer, adding organosilicon crosslinking agent, sodium persulfate initiator, and reaction rate regulator.
采用络合f - K酸作引发剂进行异丁烯阳离子聚合。
Ionic polymerization of isobutylene was carried out by using F-K acid as a catalyst.
链转移氢、其它原子或反应种转移到反应体系的化合物中(单体、引发剂或溶剂)，从而导致聚合物增长终止，这种情况称为链转移。
A growing polymer is terminated by the transferred of a hydrogen or other atom or species to it from some compound present in the system-the monomer, initiator, or solvent, as the case may be.
讨论了催化剂、 引发剂、聚合反应温度对产物的影响。
The effects of catalyst, initiator and reaction temperature on the product were discussed in detail.
讨论了催化剂、 引发剂、聚合反应温度对产物的影响。
The effects of catalyst, initiator and reaction temperature on the product were discussed in detail.
应用推荐