此法可供火力发电厂的自动控制系统设计之用。
This approach can be in designing auto -matic control system of thermal power stations.
实践证明，该自动控制系统设计合理，工作可靠。
The practice shows that the design of the system is reasonable and the operation is reliable.
文中对井眼轨道自动控制系统设计的有关基本问题进行了初步的分析。
Basic problems on design of automatic control system of bit trajectory are analyzed in this paper.
从经济性和实用性出发，对目前中小型企业较多使用的一些不锈钢带冷轧机进行自动控制系统设计。
From the view of economy and practice this paper introduces a design of automatic control system for old model of stainless steel tape mill, which are widely used in many enterprises at present.
二次大战以后，经过众多学者的努力，形成了较为完整的自动控制系统设计的频率法理论和根轨迹法理论。
The relatively complete theory of frequency method and root locus method for the design of automatic control system was set up through the efforts of numerous scholars after world war II.
结合工程实例，介绍了出租商场空调系统形式，末端设计方式，风系统、水系统划分，自动控制系统设计，设备选型等。
With a project example, presents air conditioning system forms, terminal device design, dividing of air system and water system, design of automatic control system, and equipment selection.
气体计量调度自动控制系统设计采用ADAM- 5000系列，主要由CPU控制器、输入模件、输出模件等组成。
The automatic control system for gas metering and dispatching adopts ADAM-5000 series, which are composed of CPU controller, input mold piece, output mold piece etc.
主要介绍了对温室大棚自动控制系统的设计。阐述了温度，湿度，光照强度的测量原理和方法。
Mainly on the automatic control system for greenhouse design, on the temperature, humidity, light intensity of the principles and methods of measurement.
主要介绍了OMRON公司的CPM1A系列在太阳能热水器自动控制系统中的应用，重点阐述了系统的硬件构成及系统软件的设计过程。
Application of OMRON CPM1A series PLC in solar water heater automatic control system is mainly introduced, emphasises on the system hardware constitution and the system software design process.
本文通过对啤酒生产糖化过程的工艺及关键问题的分析，从硬件、软件两个方面对啤酒生产过程中啤酒糖化自动控制系统进行设计。
This paper designs the Beer Saccharification Processing Autocontrol System in hardware and software through analyzing the technics and crucial problem in the Beer Saccharification Process.
主要从事中小型商用空调系统、中央空调系统、楼宇自动控制系统的设计制造与销售。
Mainly in small and medium-sized commercial air-conditioning system, central air conditioning systems, building automation system design and manufacture and sales.
本文介绍了卷扬式冲击钻机微机自动控制系统的基本原理、硬件的组成和软件的设计。
The fundamental principle hardware configuration and software design of a microcomputerbased automatic control system for winch type impact drill rig is described.
本文介绍了数字温度测量及自动控制系统的设计。
In this paper, digital temperature measurement and automatic control system design.
本文设计的是坩埚熔化电阻炉温度自动控制系统。
What this text design is a automatic control in temperature in melting in resistance system.
本文介绍了FTK-3型驼峰自动控制系统双机切换电路的原理、电路设计、硬件结构、软件流程和特点。
Principle, circuit design, hardware structure, software flow and features of dual computer switching circuit of FTK-3 hump automatic control system are introduced in this paper.
概述了用PLC技术对盘式压滤机自动控制系统硬件的配置及软件的设计方法。
The hardware configuration of the automatic control system for disc pressure filters by PLC technique and its software designing method are described.
为联合收割机复杂自动控制系统的研究和设计提供了一种新的思路和方法。
It offers a new thought and method for the study and design of the combine harvester's complex automation system.
为了实现电除尘器用X型气流分布板冲孔设备的自动化，设计了一套自动控制系统。
An automatic control system of a punching machine with X-type airflow-distribution board is designed for electrostatic precipitator production.
介绍了极板转运装置自动控制系统的设计思想。
The design idea of auto control system in plane transfer device has been introduced in this paper.
本文以某卷烟厂污水处理工程为研究对象，采用工业以太网技术，完成了污水处理自动控制系统的设计实现。
In this paper, sewage treatment project of a cigarette factory is research object, using industrial Ethernet technology to complete the design and implantation of sewage automatic control system.
介绍了一个污水泵站的控制工艺和控制要求，阐述了泵站自动控制系统中plc的硬件、软件设计。
The technology process and the control demands of a waste water pump are presented, and the design of hardware and software based on PLC for the pump station automatic control are described.
本文主要阐述了晾衣架自动控制系统的设计思路及方法。
The principal expounded racks for drying automatic control system design ideas and methods.
本文主要介绍了邯钢冷轧厂精整线自动控制系统的组成、配置，同时阐述了本系统的设计开发思路及在邯钢的应用。
The composition, configuration of finishing line in hangang cold rolling mill is mainly described. The design and development thought, the application of this system in hangang is also introduced.
介绍了非开挖钻杆管端加厚生产线自动控制系统的设计。
The design of non-dig drill pipe end-upsetting product line autocontrol system were introduced in this paper.
为此，介绍了一种基于喂入量的联合收割机行走速度自动控制系统，进行了该系统的硬件软件设计。
The paper develops an automatic control system of walking velocity on combine based on feed quantity, and designs its hardware and software.
本文介绍了计算机在油田集输站中的应用，给出了自动控制系统硬件设计，系统具有稳定、可靠等特点。
This paper introduces the application of computers at an oilfield gathering station. It gives out hardware design of the automatic control system which possesses stable and reliable characteristics.
介绍了检测台的工艺流程及控制要求，对PC自动控制系统的硬件及软件设计作了充分的讨论。
Introduces the process of the test and the control requirements and discusses the design for the hardware and software of the PC system.
阐述了DZJ - A型全自动纸浆模塑成型机生产工艺中的控制原理及PL C全自动控制系统的设计方法。
This paper introduces the control principle and PLC automatic controlling system design for the automation production process of the DZJ-A type vacuum pulp molding machine.
建立了基于多微处理器的管道全位置焊接自动控制系统，描述了其系统结构、工作原理和软件设计。
Based on multi microcomputer, the automatic control system of pipeline all position welding process is developed. The system structure, working principle and software design are described.
建立了基于多微处理器的管道全位置焊接自动控制系统，描述了其系统结构、工作原理和软件设计。
Based on multi microcomputer, the automatic control system of pipeline all position welding process is developed. The system structure, working principle and software design are described.
应用推荐