表面预处理须按照本规范的要求来进行。
Surfaces shall be prepared in accordance with this specification.
对这种表面预处理的机理进行了初步探讨。
评述了化学气相沉积金刚石薄膜衬底表面预处理技术的进展情况。
The progress of pretreatment techniques of substrate surface for CVD diamond film was reviewed.
最后讨论了基片表面预处理对金刚石成核作用的机理和两种新的表面预处理方法。
Finally, we discussed it's mechanism of and two new methods of substrate surface pre-handle.
经表面预处理的铝粉制备的复合颗粒，表面沉积的二氧化钛粒径变小，包覆层更加均匀。
The size of TiO_2 on the surface of modified aluminum particles was decreased and the coating was more uniform.
本文重点对近年硬质合金基体表面预处理方法及其对CVD金刚石膜沉积的影响进行了综述。
The pretreatment methods of cemented carbide substrate and their effects on CVD diamond film were mainly summarized.
如果额外涂层的涂敷时间超出厂商推荐的最大涂敷期限的话，应进行第4部分提到的表面预处理。
The surface preparation as described in Section 4 shall apply if the additional layer is applied outside the manufacturer's recommended maximum over coating period.
表面预处理的主要内容及着色反应的化学机理。并对目前众多的人工表面着色配方进行了归纳。
This paper also sums up many useful prescription of artificial surface coloration and presents the chemical mechanism of coloration reactions.
阐述了聚氨酯漆施工工艺：喷涂前表面预处理方法、喷涂前表面检查的内容、漆膜厚度、干燥方法。
The polyurethane painting technologies, such as the surface pretreatment on steel parts before spraying coating, surface checking contents, thickness of painting film, drying method, are expounded.
论述了涂布原纸板的性能、表面预处理、涂布方式、涂料组成以及后整饰等对涂布牛皮卡纸质量的影响。
This article covers the effects of the properties of the baseboard, surface pretreatment, coating device, coating formulation and surface finishing on the quality of coated kraft liner;
采用明胶及多聚赖氨酸对三者进行表面预处理，MTT法比较三者表面改性后犬血管平滑肌细胞的黏附生长情况。
The growth of SMCs was also assayed on the 3 scaffolds after they were pretreated with gelatin or Poly-1-lysine.
对催化热分解法制备的巴基管进行表面预处理化学镀、巴基管增强铜基复合材料粉末冶金法制备工艺作了的研究。
In this paper, the non-electro-plating process of carbon nanotube and the powder-metallurgy production of nanotube reinforced Cu-matrix composite is studied.
在对表面进行过预处理后，必须立即进行第一层涂层的涂覆。
Directly after the surface pretreatment, the first coat must be applied.
双动滚笼式螺旋预处理机是通过对块状物体的离心滚动摩擦碰撞，清除其表面的非同质附着物。
The double moved cylinder pretreating-machine clears away the nonidentical substance adhering to the surface of lump-shaped objects via centrifugal rolling friction collision.
对预处理后的木材图像分别用颜色直方图法、颜色矩法提取了木材表面的颜色特征。
The wood surface color characters of wood images after preprocessing are abstracted with the methods of color histogram and color matrix.
研究了超声波作用下碱预处理对聚酯超细纤维高温高压染色后表面环状三聚物含量的影响。
The influence of alkali pretreatment under ultrasonic on surface cyclic trimer content of superfine polyester fiber using high temperature high pressure dyeing process has been studied.
详细介绍了钢管粉末静电涂装生产工艺和原理以及对钢管表面进行化学、机械的预处理工艺。
Detailed is the powder-coating process and principles of steel pipe by static electricity as well as the process of both chemical and mechanical pretreatment on steel pipe surface.
探讨了一种新型水基憎水剂的制备和成膜工艺，并分析了预处理金属表面超憎水膜的形成机理。
The preparation of a new kind of water-based hydrophobic agent and the mechanism of forming super hydrophobic film on pretreated metal surface are studied.
其基本环节有：模型表面空间坐标数据测量、数据预处理、重构曲面模型、数字模型输出。
Its basic step includes: data measure of model surface, points pretreatment, reconstruction surface model, and the digital model export.
结果表明，真空渗硼预处理不仅可以有效的消除或控制钴在金刚石沉积时的不利影响，而且，还显著粗化硬质合金基体表面。
The results showed that the vacuum boronizing pretreatment method effectively reduced the diffusion and mobility of Co in the substrates and obviously roughened the surface of the cemented carbide.
采用傅立叶红外光谱（FTIR）和X光电子能谱（XPS）对预处理前后PVDF中空纤维膜表面化学结构进行分析。
The surface compositions of the pretreated PVDF membrane were determined by Fourier transform adsorption spectrum (FTIR) and X-ray photoelectron spectroscopy (XPS).
结果表明，ATR- FTIR测定蔬菜表面农残的灵敏度高于透射光谱法，具有快速、简便，无需预处理等优点。
The results showed that the ATR-FTIR is fast, convenient and more sensitive without pretreatment compared with common transmission spectroscopy.
介绍了玻璃蒙砂网印工艺的技术要点，包括玻璃表面的预处理、蒙砂印料的配制、网版制作、印刷及印后处理。
This article introduces the key points for glass frosting, such as glass surface pretreatment, frosting paste formulation, plate making, printing and post treatment.
利用傅立叶红外光谱（FTIR）和X射线光电子能谱（XPS）技术，分析桦木单板化学镀前预处理后，桦木表面官能团的变化和化学镀后元素的变化。
The variation of function group and element on it was analyzed in the pre-treated and plated process by FTIR and X-ray photoelectron spectroscopy(XPS) analysis technology.
阐述从高频地波雷达海洋回波反演海洋表面流中，使用MUSIC算法提取径向流方位必须的信号预处理。
In this paper, signal preprocessing for bearing determination of ocean surface radial current mapping by HF ground wave radar based on MUSIC is investigated.
可制造金属类的表面处理剂、酸洗、电镀、喷漆用的预处理剂。
It can be used to make treatment agent for metal surface and pretreatment agent for pickling, electroplating, painting.
介绍热镀锌钢丝预处理-拉丝和表面处理-热镀锌两条生产线的构成和特点。
To introduce components and characteristics of pretreatment-wire drawing and surface treatment-galvanizing by dipping two production lines of steel wire galvanizing by dipping.
废胶粉经自制表面改性剂ACDI预处理后，其相应的RHDPE/EVA/MWRP体系的拉伸强度和弯曲模量分别增加35%和25%，而对共混物的其它性能影响不大。
The tensile strength and the bending modulus of RHDPE/EVA/MWRP blend increased by 35% and 25% respectively when the waste rubber powder was modified by self-made surface modifier ACDI.
废胶粉经自制表面改性剂ACDI预处理后，其相应的RHDPE/EVA/MWRP体系的拉伸强度和弯曲模量分别增加35%和25%，而对共混物的其它性能影响不大。
The tensile strength and the bending modulus of RHDPE/EVA/MWRP blend increased by 35% and 25% respectively when the waste rubber powder was modified by self-made surface modifier ACDI.
应用推荐