• It can be reasonable combined according to the blowing rate to meet the actual demand.

    设备还根据处理风量大小合理组合满足实际需要。

    youdao

  • In the operation of jigging machine, we should timely adjust blowing rate, water quantity, feeding and layout.

    跳汰作业的操作中,适时调节风量水量、给排料。

    youdao

  • The influence of contents of blowing agent AK on the curing rate, blowing rate of silicone rubber were discussed.

    研究发泡剂AK用量硅橡胶硫化速率发泡速率影响

    youdao

  • The reasonableness and practicability of way direct to monitor the blowing rate of axial fan have been verified in the article.

    对电厂动调轴流式风机,用运行风量直接监测方法合理性可行性进行论证。

    youdao

  • This article focuses on technical issues such as feeding, blowing rate, water quantity, feeler lever and layout quantity of jigging machine.

    本文主要阐述了跳汰给料风量水量探杆、排料量技术问题

    youdao

  • Experiment results show that gas phase made silicon dioxide performs an important function in increasing the blowing rate of PVC paste resin.

    实验表明二氧化硅提高聚氯乙烯树脂发泡倍率起着重要作用

    youdao

  • There were optimum matching of top blowing rate and bottom blowing rate and corresponding location during top-bottom blowing to get better effect.

    顶底复,为取得较好的效果,亦存在顶吹-吹气量最佳配合相应的有利位置

    youdao

  • The smelting process was strengthened by using high top pressure, high pressure drop, large blowing rate, reduced tuyere section and enhanced blasting velocity.

    采取高压差、风量缩小风口直径、提高风速鼓风动能措施进一步强化冶炼;

    youdao

  • Discussion focus on the influences of technological parameters like spinning temperature, spinning speed, blowing rate, oil finishing as, well as texturing on the products quality.

    重点讨论纺丝温度、纺丝速度侧吹风风速、上油、拉伸变形工艺参数对产品质量影响

    youdao

  • The experiment result of the sintered metal tube shows that the uneven rate of axial blowing is lower than 10%, and the flow is steady.

    烧结金属实测结果显示吹风径向不匀小于10%,气流稳定

    youdao

  • It is found that slags decrease the rate of vacuum denitrogenation and vacuum argon blowing decreases the denitrogenation resistance of slags.

    结果表明,熔降低真空速率吹氩能减少熔渣对真空脱氮阻力

    youdao

  • At the final blowing stage, the relation between carbon content and decarbonization rate can be described by cubic function;

    吹炼末期,含量脱碳速率关系可用三次方函数描述

    youdao

  • The effects of bottom blowing flow rate, top blowing flow rate and top lance level on mixed time in iron bath of smelting reduction furnace were studied with water modeling.

    通过熔融还原的水力学模型,实验研究了流量流量顶枪枪位熔融还原炉内混匀时间影响

    youdao

  • The results show that the entrainment of slag in tundish with gas curtain was mainly affected by gas flow rate and the position of gas blowing.

    结果表明挡墙位置吹气量影响中间包卷主要因素。

    youdao

  • The result shows that the effect of top blowing oxygen jet on the mixing time and circulation flow rate can be disregarded.

    结果表明顶吹射流钢包混匀时间循环流量作用可以忽略。

    youdao

  • It showed that the heating and cooling temperature and rate was the factor effecting the process except for the blowing agent variety and the loading weigh.

    实验研究显示,影响滚塑发泡工艺因素除了发泡剂种类以及加入量,还有加热冷却温度速度等等。

    youdao

  • It was found that gas blowing at the bottom effectively eliminated the short flow, strengthened the mixed flow of gas curtain regions and increased the total inclusion removal rate.

    研究表明,中间底部吹气过程可以有效改善钢液流动状态,消除短路增强幕墙”区域钢液混合有效促进夹杂物在中间包内上浮去除

    youdao

  • The effect of gas bubble size, injection rate and blowing time on removal of hydrogen and inclusion in liquid steel during refining has been studied and analyzed by theory calculation.

    通过理论计算研究分析了气泡直径气量和吹气时间精炼时夹杂影响

    youdao

  • It is right. After the floor is paved, the rate of air leakage is no more than 2%. It is mainly used in underground blowing-in fo air conditioner for 5a class office building.

    密封性能地板安装好以后漏风大于2%,主要用于5a级写字楼空调地下送风办公室。

    youdao

  • It is right. After the floor is paved, the rate of air leakage is no more than 2%. It is mainly used in underground blowing-in fo air conditioner for 5a class office building.

    密封性能地板安装好以后漏风大于2%,主要用于5a级写字楼空调地下送风办公室。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定