It is a real green and environment protective bonding material.
属绿色环保型铸造材料。
Selection of the underlying bonding material generally chromium iron-nickel alloy.
粘接底层材料一般选用铬铁镍合金。
The present invention relates to a bonding material for shoemaking industry and its preparation method.
本发明涉及制鞋行业所需的粘接材料及其制备方法。
The viscoelasticity and viscoplasticity of bonding material will result in hysteresis and drift errors to sensor output.
黏合材料的黏弹性和黏塑性将会导致传感器输出的滞后和漂移误差。
Bonding material of aluminum and copper is useful material concerning lightening, and thermal and electrical conductivity.
粘结材料的铝和铜是关于减轻了有用的材料，和热和电导率。
The insufficient shear strength of waterproof bonding material will result in the jostle, piling up, wave and rut of facing layer.
防水粘结材料抗剪强度不足会导致面层推挤、拥包、波浪和车辙的产生。
The rubber asphalt mixture is an asphalt mixture by taking the rubber asphalt as the bonding material to be heated and mixed with the aggregates.
橡胶沥青混合料是指采用橡胶沥青作为结合料与集料加热拌和而得到的一种沥青混合料。
The bonding material and the protective layer may affect the desired index of refraction of the material on either side of the wavelength converting element 110.
粘合材料与保护层可能会影响在波长转换元件110的任一侧上的材料的所期望的折射率。
Primer, a bonding material is used when making the heat fusion road markings. The prime can prevent the film from coming off and strengthen the adhesive force between the film and the road surface.
底漆是涂布路面标线用热熔涂料时使用的粘结材料，底漆起着防止涂膜剥落，提高涂膜和路面粘着力的作用。
Direct wafer bonding is a new process of material integrating and has received tremendous attention in the research of optoelectronics and microelectronics field.
摘要晶片直接键合技术是材料集成的一项新工艺，是近年来集成光电子领域的研究热点之一。
The synthesis of 2,3- DCB /MMA Copolymer and preparation of the adhesive for bonding rubber to metal with the copolymer above as the main material are introduced.
介绍2，3-二氯丁二烯一甲基丙烯酸甲酯共聚物的合成，以及以该共聚物为主体材料的橡胶同金属热硫化粘结的胶粘剂。
It is one of the main methods in bridge reinforcement that bonding steel plate or other fiber compound material is used to strengthen load-carrying capacity of weak member of Bridges.
粘贴钢板或其他纤维复合材料对梁的受拉薄弱区进行补强是桥梁加固的主要方式之一。
Direct wafer bonding is a new process of material integrating and has received tremendous attention in the research of optoelectronics and microelectronics field.
晶片直接键合技术是材料集成的一项新工艺，是近年来集成光电子领域的研究热点之一。
The effects of dosage of each material on the bonding strength were studied.
研究了原材料的用量变化对胶粘剂粘接强度的影响。
The compatibility with polar material and bonding performance of SBS is improved by introducing polar group.
在SBS上引入极性基团进行原位改性，可以提高与极性材料的相容性及粘接性能。
The bonding strength of interface can be increased and the shrinkage of patching material reduced when adding 8% fly ash.
掺入8%粉煤灰还可提高界面粘结强度及减少修补材料的收缩。
Testing results showed that the grouting material modified by vinyl ester resin as underwater repair material, at optimum content, was of good bonding strength.
结果表明，在最优用量时，改性乙烯基酯树脂浆材，作为水下修补材料，具有优良的粘接补强性能。
UV-curable adhesive is a class of important material that could be rapidly created adhesive bonding properties by the UV radiation.
紫外光固化胶粘剂是指借助UV辐射使粘接材料快速产生粘接性能的一类胶粘剂。
The effects of interfacial treatment modes on the bonding properties between asphalt modified polyurethane joint material and cement mortar were investigated.
就界面处理方式对沥青改性聚氨酯接缝材料和水泥砂浆黏结性能的影响进行了研究。
This paper analysed and calculated the dynamic yielding strength of plastic deformed metal in the bonding zone of explosive welding composite material in the condition of explosive welding.
用比拟的方法分析和计算了爆炸焊接条件下，爆炸复合材料结合区中塑性变形金属的动态屈服强度值。
The product is two layers of limpness composite material of polyester thin film coated with bonding agent and single surface bonding of calendaring aromatic polyamide fiber paper.
该产品是由聚酯薄膜涂以胶粘剂，单面粘合轧光聚芳酰胺纤维纸而成的二层柔软复合材料。
The bonding strength is ensured by the correct choice of substrate material, surface preparation, adhesive and process parameter.
粘合强度可以通过选择正确的基体材料、表面处理、胶粘剂和工艺参数得以保证。
If bleaching doesn't help, ask your dentist about dental bonding, in which a tooth-colored material is applied to teeth.
如果漂白不起作用，请询问您的牙医，有关牙齿粘接事宜，有一种同牙齿同色的材料可以用于牙齿。
The water-absorbing material can play the role of improving the bonding strength of the epoxy adhesive in water.
吸水性材料对水下环氧胶粘剂的粘接强度起增强的作用。
This paper introduces a fabricated method of using fused silica as the chip material. It includes standard photolithography, wet chemical etching and bonding techniques.
本文介绍了选用优质石英为芯片基体材料的一种制作方法，关键技术包括标准的光刻，湿法腐蚀，键合等微加工技术。
The methods for preparing structural material bonding agent by condensing the alkaline lignin in the wast liquor of soda pulping process with formaldehyde and phenol are described.
本文叙述了利用碱法制浆废液中的碱木素同苯酚、甲醛缩合制取结构材料粘合剂的方法。
Acrylic acid cream type sealing material. It has the good properties of weatherproof, bonding flexible and water resistance with variety of colors.
水乳型密封膏。具有优良的耐候性、粘接性、柔韧性及耐水性，色彩多样。
The results offer the foundation of bonding structure and material life reliability on long-life satellite in our country, emerge the prospect of nano-material using in the space.
研究结果为中国长寿命卫星胶接结构、材料的寿命可靠性提供了相关依据，展现了纳米材料空间应用的前景。
The results offer the foundation of bonding structure and material life reliability on long-life satellite in our country, emerge the prospect of nano-material using in the space.
研究结果为中国长寿命卫星胶接结构、材料的寿命可靠性提供了相关依据，展现了纳米材料空间应用的前景。
应用推荐