When joint is filled, a continuous rim of brazing alloy will be visible.
连接处被充满后，就会看到焊接合金的边缘。
The temperature of the joint should be hot enough to melt the brazing alloy .
连接部位的温度应该高到能够融化铜焊合金。
When joint is filled, a continuous run of solder or brazing alloy will be visible.
在安装连接部件时，可以看到焊料和钎焊合金继续流动。
High power transverse flow CO2 laser was used to scan the brazing alloy and diamond grits.
采用高功率横流CO2激光扫描钎料合金与金刚石颗粒。
The theoretical rules among the high temperature performance of the brazing alloy, strain rate an…
分析了钎料高温性能与应变速率、钴的变质剂作用等因素之间的理论规律。
The effect of copper on low boron low chromium nickel based brazing alloy was studied by experiments.
本文研究了铜对低硼、低铬镍基钎料工艺性能的影响。
The results show that the melting point of brazing alloy is constant when the content of boron and silicon is reduced and the right amount of copper is added in.
试验结果表明，在降低镍基钎料中硼、硅元素的同时加入适量的铜可以使钎料的熔点基本不变。
The product is used for brazing copper and copper alloy, easy processing, plastic, with good infiltration.
用于做钎焊铜及铜合金，易加工，塑性好，具有良好的浸润性。
Since brazing is performed at temperatures within the hot-short range, strain must be avoided during the brazing and cooling of this alloy.
由于钎焊是表现在温度与热短程，应变必须避免在钎焊和冷却这一合金。
Solder factory is mainly engaged in the production and marketing of products, aluminum copper alloy brazing flame or high-frequency brazing material.
本厂主要从事焊锡制品的生产和销售，铝铜合金的火焰钎焊或者高频钎焊材料。
It is applicable to the various brazing between aluminum alloy and aluminum alloy, aluminum alloy and Stainless steels.
铝基钎料适用于铝合金、铝合金与不锈钢之间的钎焊。
The results showed that the F-series composited brazed materials can be used efficiently to remove the residual stress within brazing join of hard alloy and steel.
实验指出，使用F系列银复合钎料，对消除上述材料焊缝的残余应力的效果明显。
This alloy is an ideal brazing filler suitable to the directional or singlecrystal superalloys, and the elements are beneficial to superalloys at all.
该合金是一种较理想的定向和单晶高温合金用的钎焊料。
The filler metals and fluxes suitabled for 2A50 aluminum alloy brazing were selected according to the feature of 2A50 aluminum alloy and the test of spreadability and clearance fillabitity.
针对2A50铝合金的特点，根据铺展性、填缝性试验，对适合其钎焊的钎料与钎剂作了选择，进行了接头强度试验。
Brazing process between PTC ceramic and aluminium alloy within air heated furnace is studied.
研究了采用钎焊方法，在空气加热炉中实现PTC陶瓷材料与铝合金的连接问题。
It is applicable to the various brazing between aluminum alloy and aluminum alloy, aluminum alloy and Stainless steels.
铝基钎焊粉aluminum - based Brazing铝基钎料适用于铝合金、铝合金与不锈钢之间的钎焊。
Weldability of high alloy tool steels is analyzed, the application of fusion welding, brazing and solid-state welding in the welding of high alloy tool steels had been summarized.
高合金工具钢的焊接性能较差，但高合金工具钢的焊接在工业上有较广泛的应用。
For both aluminum alloy and magnesium alloy, a sound joint can be obtained under appropriate welding conditions using the process method of ultrasonic brazing.
采用一定的钎料对铝合金、镁合金进行超声波钎焊能较好提高其接头力学性能。
Combined hot rolling process for aluminum alloy brazing sheet(foil) is determined. Aluminum alloy brazing sheet (foil) which meet using requirement is developed.
铝合金复合板（箔）的生产主要有热轧复合和冷轧复合，用冷轧方式不能生产大规格的复合?。
Combined hot rolling process for aluminum alloy brazing sheet(foil) is determined. Aluminum alloy brazing sheet (foil) which meet using requirement is developed.
铝合金复合板（箔）的生产主要有热轧复合和冷轧复合，用冷轧方式不能生产大规格的复合?。
应用推荐