Then model can be used to calculate the infrared spectra of ionic crystals as well.
与多种典型离子晶体红外光谱的实测结果进行对比。
Both panel method and lifting surface method can be used to calculate the unsteady force.
非定常力可以采用面元法或升力面方法计算得到。
The experiment results show that the Image Method can be used to calculate the flow field.
计算实验表明：镜象法能有效地应用于流场计算。
Program designed can be used to calculate arbitrary order ghosts of a laser amplifier system.
所编制出的程序可用于寻找激光放大系统中的任意高阶鬼像点。
The data of development proved that this method can be used to calculate reserve with high accuracy.
经过开发井资料进一步证实，该方法计算的储量具有较高的精度。
The solutions derived can be used to calculate the stability of the grillage easily, reliably and flexibly.
通过计算比较可知，推导出的解能够简单、可靠且灵活地计算船舶板架的稳定性问题。
It is shown hybrid method can be used to calculate bistatic RCS and to analyse bistatic scattering mechanism.
本文的讨论表明混合法不但可精确的计算目标的双站rcs，而且可用以分折双站散射机制。
The force and the area over which the force ACTS can be used to calculate the stress produced in the material.
力和力作用的面积可以用来计算出材料内部产生的压力。
The test results show that both models can be used to calculate cuttings bed thickness in the horizontal section.
结果表明。两模式都可用于预测水平井段岩屑床厚度。
If the degree of association is higher, the method can be used to calculate the association constants of higher degree.
如果缔合程度较高，此方法还可用来计算高阶缔合常数。
This algorithm can be used to calculate not only intersection but also set-theoretic differences and union of two polygons .
该算法不仅可以求多边形的“交”，而且可以求多边形的“并”和“差”。
The sample template shown in the following tables can be used to calculate cost savings for some common processes and projects.
在下列列表中显示的范例模板，可以用于为共同的过程和项目计算节省的成本。
The method can be used to calculate the the end time of effect of wellbore storage with start-up pressure gradient considered.
该方法可用于考虑启动压力梯度影响的低渗透气藏气井井筒储集效应结束时间的计算。
The dynamical model can be used to calculate maximum ice jam stages when discharge hydrographs at boundary sections are provided.
应用动力模型可以计算出某一流量过程的最高冰塞、冰坝水位。
The results are showed that the method is simple, results are satisfactory and GMDH can be used to calculate the rock drillability.
通过试算表明，该方法运算简便，结果可靠，可用于计算岩石可钻性。
Moire deflection measurement can be used to calculate refractive index by measuring deflection of probe beam passing through mediums.
摩尔偏析测量术通过测量探针光束经过不均匀介质后光线的偏折来估算介质的折射率。
The bent-housing motor is relatively rigid, so the geometric method can be used to calculate the build angle rate of steerable motor.
弯壳体导向钻具的刚性大、变形小，因此可采用几何法来计算造斜率。
Frugal formula can be used to calculate the pipe pressure loses of extractive steams, and to diagnose problems of extractive steam pipes.
弗留格尔公式可用于确定变工况下抽汽管道压损值和诊断抽汽管道的故障。
Based on the model. a user friendly code was written which can be used to calculate (1) the temperature in the cylinder and 'the mandrel.
以模型为基础编制的程序可以用来计算：1筒体和心轴内的温度分布。
The results can be used to calculate dispersive properties of calcite and the method can be used to obtain fitting formulas for other material.
本结果可在计算方解石色散特性时使用，本方法可在拟合其它材料的色散方程时使用。
The recovery of tracer shows whether the field tracer data can be used to calculate the transport sediment rate or the infill rate of sediment.
在整理和分析示踪沙扫测资料时，通过计算回收率来评价是否能算出计数率等值线的重心，以便进行输沙率或回淤量的定量计算。
Consequently, with some modifications, a linear model can be used to calculate the transients of the nonlinear systems under large perturbations.
从而，用小偏差的线性数学模型，进行适当修改后，可以用来求取非线性系统在大扰动下的过渡过程。
Global variables can be used to calculate values in advance of their use and thus speed up performance and reduce complexity in other SQL entities.
在使用全局变量之前，可以使用它们计算变量值，从而可提升其他SQL实体的性能并降低复杂性。
This paper makes improvements on the methods of stress circle drawings. And this method can be used to calculate the strain and moment of inertia.
本文对应力圆图解法作了改进，使图解法更直观、更简便。并将改进后的图解法应用到应变、惯性矩计算中。
When the depth of soft layer is smaller than the width of foundation, the one dimensional consolidation theory can be used to calculate the settlement.
对于基础面积较大，软土层深度相对基础宽度不大，可以用一维固结理论计算。
It is showed that well logging data can be used to calculate oil and water relative permeability that can satisfy produced fluid types of evaluating reservoir.
结果表明，用测井数据可以进行油、水相对渗透率的计算，并且完全满足评价储集层的产液情况。
They also can be used to calculate simple variables or conversions (e. g. pounds to kilograms) for data that is presented in various formats in different studies.
电子表格还可用于简单变量的计算或对不同研究中不同格式的数据进行单位换算（如磅换算为千克）。
The technique is called the Green function method. The method can be used to calculate efficiently the node-to-node resistances or impedances in substrate models.
该方法可用于衬底模型中节点间电阻值或阻抗值的计算，其计算效率较高。
Both conventional method and mutually related field-circuit algorithm can be used to calculate and analyze parameter and performance of synchronous electric machine.
进行同步电机参数及性能计算分析时，可以采用传统电磁计算方法，也可以应用场路结合算法。
Both conventional method and mutually related field-circuit algorithm can be used to calculate and analyze parameter and performance of synchronous electric machine.
进行同步电机参数及性能计算分析时，可以采用传统电磁计算方法，也可以应用场路结合算法。
应用推荐