All carbon arc gouged surface areas shall be ground to clean bright metal prior to subsequent welding.
开始后续焊接前，所有碳弧气刨面区域应接地至洁净明亮的金属。
Indoors light is furnished by carbon arc lamps incandescent bulbs and quartz bulbs. the basic indoor lights are spotlights and floodlights. spotlights throw a beam of concentrated intense light.
室内光源有碳弧光灯，白炽灯及石英灯等。室内的主光源是聚光灯和散光灯、泛光灯。聚光灯将光聚到一起。
In this dissertation, the foundation of the arc model improved the present production theory of carbon nano-materials by arc discharge in liquid.
本文通过放电模型的建立，完善了目前已有的液体电弧法制备碳纳米材料的理论。
It is possible to deposit DLC (Diamond-Like Carbon) without MP by filtered vacuum arc deposition.
采用过滤阴极电弧沉积方法有可能制成无宏观粒子的类金刚石薄膜。
By the technology of vacuum cathodic arc deposition, graphite as cathode, Diamond like carbon film (DLC) was deposited on PMMA resin denture.
采用电弧离子镀膜方法，以高纯石墨为碳离子源在PM MA树脂义齿表面沉积类金刚石膜。
We present a Raman scattering study of multi wall carbon nanotubes prepared by DC arc discharge method.
本文报导了用直流碳弧放电方法制备的多层碳纳米管的拉曼光谱。
Windmills from old car parts and car batteries and artificial sunlight from carbon arc lamps using pencil leads is possible, however.
可以从破旧的车辆里拆取风叶和蓄电池，再用铅笔芯制造弧光照明灯获取人工照明是有可能的。
By comparing backgouging of plasma arc with carbon arc to the welded joint of 13-5 martensitic stainless steel, the backgouging of plasma arc is proved feasible for the full penetration weld.
通过对13 -5型马氏体不锈钢焊接接头进行等离子弧清根及碳弧气刨清根的比较，证明等离子弧清根对全焊透焊缝实施背面清根是可行的。
If there aren't cast-iron electrode, the cast-iron electrode can be made by ordinary low carbon steel electrode, and repair the damaged stock with arc cold welding.
在没有铸铁焊条的情况下，采用普通低碳钢焊条制作铸铁焊条，用电弧冷焊技巧修复损坏的铸铁件。
This paper briefly introduces the work principle and structure of carbon arc air gouging.
介绍了碳弧气刨的工作原理和组成结构。
The accumulated solar UV data, solar UV-spectrum in Guangzhou area, and UV-spectrum of artificial lamp as sunshine carbon arc, UV carbon arc, xenon arc etc were analyzed.
系统分析了太阳近紫外能量累积值与紫外能谱实测结果及实测阳光碳弧、紫外碳弧、氙灯等人工光源紫外能谱分布图；
The developed welding power source ZX5-800Dshows a satisfactory performance in the welding process of TIG. Shield metal arc, submerged arc and the. carbon arc air gouging.
研制的ZX5一800D电源在进行钨极氩弧焊、手工电弧焊、碳弧气刨及埋弧焊时均获得满意的性能。
EMEM may replace emery wheel grinding, carbon arc gouging operation in certain applications.
数控电熔爆机床可在某些加工场合取代金刚石砂轮磨削、碳弧气刨加工。
Tetrahedral amorphous carbon (ta-C) films have been deposited on P-type (100) polished c-silicon wafer with different substrate negative bias by filtered cathodic vacuum arc technology.
采用过滤阴极真空电弧技术并施加一定的衬底负偏压，在P（100）单晶硅片上制备出四面体非晶碳薄膜。
It was found that impact toughness of weld metal was maximum using carbon arc air gouging, and it was minimum using acid backing.
结果表明，清根方式对焊缝冲击韧度有明显影响，用碳弧气刨清根得到的焊缝冲击韧度最好，而用酸性衬垫得到的焊缝冲击韧度最差。
The synthesis results are that the dilution rate of surfacing of carbon electrode arc constrained by argon is low and the transfer coefficient of alloy elements is high.
其综合作用使碳极氩气拘束电弧堆焊稀释率低，合金元素过渡系数高。
It is also suitable for carbon arc gouging using up to 10mm diameter carbon electrodes.
它也适用于直径达10毫米的碳棒进行碳弧气刨。
To achieve this objective, in-depth study is needed on the growth mechanism of carbon nano-materials by arc discharge in liquid and the effect of various arc parameters and external magnetic fields.
为了实现这个目标，就需要深入研究液体电弧放电过程中碳纳米材料的生长机理，各种电弧放电参数和外加磁场对其影响。
Infrared: Nonvisible, long wavelength radiation from a carbon or xenon arc that contributes to the heating of the film and equipment.
红外线：从碳弧灯或氙弧发出的不可见的、长波长的辐射，它对胶片和设备传送热量。
The developed welding power source ZX5-800Dshows a satisfactory performance in the welding process of TIG. Shield metal arc, submerged arc and the. carbon arc …
研制的ZX5一800D电源在进行钨极氩弧焊、手工电弧焊、碳弧气刨及埋弧焊时均获得满意的性能。
Diamond -like -carbon (DLC) thin film was prepared by filtered arc deposition (FAD) with a good electron emission performance.
采用真空磁过滤弧沉积(FAD)的方法制备的类金刚石(DLC)薄膜具有良好的场发射性能。
However, rectilinear carbon fibers were synthesized by the catalytic decomposition of acetylene with Cu nanoparticles and Ni nanoparticles as the catalyst prepared by hydrogen-arc plasma method.
然而，利用氢电弧等离子体法制备的纳米铜和纳米镍作为催化剂，催化热解乙炔，得到的产物均是直线型碳纤维。
The chemical composition, mechanic property, weldability and corrosion resistance of argon arc welding wire for low carbon steel pipe line are contrasted and analyzed.
对低碳钢管线用的氩弧焊丝的化学成分、机械性能、可焊性能、耐腐蚀性能进行对比分析，为合理选用焊丝提供了依据。
Using the composite graphite rods with the sulphide of iron group metals as anode, the double-wall carbon nanotubes have been fabricated by arc discharging under hydrogen atmosphere.
用含有铁族金属硫化物的复合石墨棒作阳极，在氢气氛围下实施电弧放电，制备出了双壁纳米碳管。
Companies with welding, carbon dioxide gas shielded arc welding, argon, carbon arc gouging, oxygen cutting and other special operations personnel.
公司具备电焊、二氧化碳气体保护焊、氩弧焊、碳弧气刨、氧气切割等特种作业人员。
It can provide several high performance welding modes, such as constant-voltage submerged arc welding, constant-current submerged arc welding, gas shielded welding and carbon arc air gouging.
它能提供多种高性能的焊接模式，如恒压埋弧焊、恒流埋弧焊、气保焊、碳弧气刨。
The formation mechanism of carbon nanotubes coated with metallic nano-particles by using anode-arc discharge method was analyzed.
分析了阳极弧等离子体法合成碳纳米管内包覆金属纳米粒子的形成机理。
The method of Carbon arc-welding is adopted. It is feasible in practice to be used in the material weld. The feedback from the user demonstrates the reliability of welding quality.
焊接方法采用碳弧焊，通过生产实践验证是可行的，用户在使用中对产品的反馈论证了其焊接质量的可靠性。
The method of Carbon arc-welding is adopted. It is feasible in practice to be used in the material weld. The feedback from the user demonstrates the reliability of welding quality.
焊接方法采用碳弧焊，通过生产实践验证是可行的，用户在使用中对产品的反馈论证了其焊接质量的可靠性。
应用推荐