It corresponds to the "jet wake" structure of centrifugal compressor.
这与有关文献中所指出的离心风机的“射流尾流”结构相对应。
This paper gives a method for drawing centrifugal compressor impeller by use of microcomputer.
本文给出了一种以微型计算机为工具绘制离心压气机叶轮图形的方法。
The operating condition of dry seal on centrifugal compressor and its economic benefits are introduced.
介绍了干气密封在离心压缩机上的工作运转情况，及其所带来的经济效益。
Critical speed is one of the important dynamic parameters of the rotor system in centrifugal compressor.
临界转速是离心压缩机转子系统的主要动力参数之一。
This paper puts forward a method for designing the backward swept blades for centrifugal compressor impellers.
本文介绍一种具有后掠叶片的径流式压气机叶轮造型方法。
A geometry designing method for developable surfaces backward swept centrifugal compressor was given in this paper.
给出一种可展曲面后掠叶片离心式压气机叶轮选型方法。
Glasfloss Z-Pak GT filters are ideally suited for the rigors of gas turbine and centrifugal compressor applications.
此款燃气轮机过滤器非常适合用于要求严格的燃气涡轮和离心式压缩机应用。
The presented problems and resulted harm about air seal axial clearance in a centrifugal compressor are pointed out.
指出了离心空压机气封轴向间隙存在的问题及造成的危害。
The calculating method of viscous end speed defective value & end width for centrifugal compressor impeller is given.
给出了离心压缩机叶轮粘性尾迹速度亏缺值及尾迹宽度的计算方法。
Coke oven gas is most hydrogen and methane gas is not pure, and, therefore, generally with the centrifugal compressor.
焦炉气大部分是氢和甲烷，气体不纯净，因此，一般用离心式压缩机。
Parametrization programming of space intersection deep hole in casing machining of centrifugal compressor is set forth.
阐述了离心式压缩机机壳加工中的空间相交深孔的参数化编程方法。
The control system preventing centrifugal compressor equipped in large-scale gas turbine from surge was discussed in the paper.
阐述了大型燃气轮机增压站所配离心式压缩机防喘振系统的控制系统。
This paper introduces an experimental study of a centrifugal compressor matching with five different types of radial diffusers.
介绍了某型离心压气机叶轮与五种径向扩压器匹配的试验研究。
Against the vibration problem arising from DH centrifugal compressor test running, analysis and treatment method is put forward.
针对DH型离心压缩机试车中的振动问题，提出了分析处理方案。
Centrifugal compressor in the petrochemical industry application is very wide, especially in the application of ethylene industry.
离心式压缩机在石化工业的应用很广，尤其是在乙烯工业的应用。
The intrinsic relation between the pneumatic parameter, structural parameter and acoustic power level for centrifugal compressor is given.
给出了离心压缩机气动参数和结构参数与声功率级之间的内在关系。
An appropriate front lean Angle increases the range of a centrifugal compressor, improves the flow and enhances the isentropic efficiency.
合适的前倾角有利于扩大压气机工作范围，能够改善流道内的流动，提高等熵效率。
Aimed at the surging existed in centrifugal compressor, this paper analyzes factors for surging and presents control method for anti-surging.
针对离心式压缩机存在喘振的问题，分析影响喘振的因素，介绍抗喘振控制方法。
Compressor impeller is a type of representative parts with sculptured surface, which is the most important part in the centrifugal compressor.
压气机叶轮作为离心压气机的核心零件，是一类典型的复杂曲面零件。
Three-dimensional turbulent flow of the endwall region inside a centrifugal compressor impeller was studied using a Laser Doppler Velocimetry.
用三维激光多普勒测速系统测量研究了一个离心压气机转子近端壁区三维紊流流场。
Numerical research of the three dimensional viscous flow field in diffuser with small flow rate stage of centrifugal compressor is carried out.
对一离心压缩机小流量级扩压器内部的三维粘性流场进行了数值研究。
Vaned diffuser plays an important role in centrifugal compressor as it can improve the performance of compressor and broaden the operating range.
离心压缩机中，叶片扩压器对提高压缩机整机性能、拓宽有效运行范围发挥着举足轻重的作用。
Two centrifugal compressor impellers with different meridional shape and blade Angle were designed using computer-aided integrated design systems.
采用离心压气机计算机辅助集成设计系统，设计了两个不同子午形面和叶片角的离心压气机叶轮。
The paper introduces the design on anti-surge of centrifugal compressor by SLPC programmable controller, and gives user program flow diagram and list.
本文介绍了采用SLPC可编程调节器实现离心式压缩机防喘振的设计，并列出了SLPC用户程序框图。
Based on the geometry characteristic and processing technique of centrifugal compressor impeller, the tool path of rough and finish machining are scheduled.
分析了离心压气机叶轮的几何结构特点、加工工艺，并在此基础上规划了叶轮的粗、精加工刀具轨迹。
The objective of the present paper is to study the vortices motions in the impeller ofvaneless diffuser of centrifugal compressor by numerical computations.
本文的目的是用数值计算方法来研究离心式压气机叶轮内的旋涡运动。
The objective of the present paper is to study the vortices motions in the impeller ofvaneless diffuser of centrifugal compressor by numerical computations.
本文的目的是用数值计算方法来研究离心式压气机叶轮内的旋涡运动。
应用推荐