The relationship between the control voltage and the current output by the constant-current source may shift.
控制电压和由恒流电源输出的电流之间的关系改变可能会产生漂移。
A fairly basic circuit (left as an exercise, but it's not difficult) can take the control voltage and output a constant current which is proportional to the voltage.
一个相当基础的电路(留作练习，不过并不难)处理控制电压并输出与电压成比例的恒流。
Unique Constant flow Constant Pressure Technology with accurate control of the voltage and current promoting stable performance.
独创恒流恒压充电技术，使电压电流得到精确控制，性能更稳定。
The control system functions to keep speed of the machines substantially constant and the voltage within prescribed limits, even the load may change.
控制系统的功能是在负载随时变化的工况下，确保机组转速恒定，并使电压输出控制在要求范围之内。
Then a voltage vector control scheme for induction motors based on constant stator flux is presented and it's nonlinear limitations are analyzed.
结合定子磁链控制，提出异步电机基于定子磁链幅值恒定的电压矢量控制方案，并对该方案的非线性局限进行了分析。
It can be divided into two control modes: constant voltage and adjustable voltage.
其工作方式分为定电压和可调电压两种控制形式。
The adopted control mode of previous common frequency converter is usually of open loop constant voltage ratio, which its control curve is not stable.
早期通用变频器大多为开环恒压比的控制方式，控制曲线不稳定。
Using voltage feedback control, the constant power output is achieved during the flywheel discharging period.
在飞轮能量释放过程中，利用电压反馈控制，负载能获得恒定的电功率。
Full speed within sections of constant flux and constant voltage constant power control, we can get the torque - speed characteristics under the control.
在全速范围内分段进行恒磁通和恒电压恒功率控制，得到控制下的转矩—转速特性曲线。
MPS700 series dc voltage constant-current power supply, is designed by using linear series MOSFET control mode of the ac input dc output power.
MPS700系列直流稳压稳流电源，是采用MOSFE T线性串联调整方式设计的交流输入直流输出电源。
By using a series and shunt combination of optocouplers the attenuator can be configured to produces a constant input and output impedance, regardless of where the voltage control setting is.
通过使用光耦衰减器的串联和分流相结合可以配置成恒定的输入和输出阻抗，而与控制电压无关。
To get constant voltage and constant frequency energy that users need, the software and hardware of the inverter control system is designed.
由于永磁直驱风力发电系统所发出的电能为电压和频率的交流电，为得到恒压恒频的电能，本文进行了逆变控制系统的软硬件设计。
DC power supply is mainly provide constant voltage power supply for control circuit, driver circuit and a variety of protection circuits and allows the system to work properly.
直流稳压电源主要是用于对系统中的控制电路、驱动电路以及各种保护电路提供恒压电源，使得系统能够正常工作。
SPWM is a set of constant amplitude but unconstant width rectangular serial pulse produced by control return circuit to approximate sinusoidal voltage waves.
(正弦脉宽调制)是由控制回路产生一组等幅而不等宽的矩形脉冲列，用来近似正弦电压波。
The control way of system has 3-patterns: exciting regulator of constant terminal voltage, constant exciting current regulator and exciting regulator of constant power factor.
控制方式具有恒机端电压励磁调节、恒励磁电流调节、恒功率因数励磁三种。
The spot welding tests prove the microcomputer control system has satisfactory constant current monitoring effect under different main voltage and load conditions.
并通过不同网压和不同负载下的点焊试验，证明该微机系统可获得满意的恒流监控效果。
Constant voltage characteristic was also designed according to the character of CO2 twin-wire welding process, and software PI control arithmetic was confirmed.
本研究还根据CO2双丝焊接的特点设计了恒压外特性，并确定了软件PI控制算法。
This constant voltage system key lies in the control system the design, and switch transistor choice and application.
该稳压系统的关键在于控制系统的设计，及开关晶体管的选择及应用。
In this paper a novel hysteresis current control method based on quasi optimized space voltage vectors for Active Power Filters (APF) with constant switching frequency is proposed.
提出了一种基于优化电压矢量的有源滤波器定频滞环电流控制新方法。
To achieve constant current, constant voltage, constant power, fixed width, constant temperature control.
能实现定电流、定电压、定功率、定脉宽、定温控制。
Safety protection power circuit: Constant current control circuit, high standard standard protection system: preventing high voltage, temperature, surge, lightning and so on.
安全防护电源电路：恒流驱动电路，高标准防护系统：对过压、过热、浪涌、防雷具有良好的保护作用。
Safety protection power circuit: Constant current control circuit, high standard standard protection system: preventing high voltage, temperature, surge, lightning and so on.
安全防护电源电路：恒流驱动电路，高标准防护系统：对过压、过热、浪涌、防雷具有良好的保护作用。
应用推荐