The construction load bear by floor are changing with the position of floor and time.
期间楼层承担的施工荷载随楼层位置和时间不断变化。
Applying finite analysis software ANSYS, this paper simulates construction load of SRC beam.
文中应用有限元分析软件ANSYS对型钢混凝土梁构件施工荷载作用进行模拟。
Because the arch bracket is all subjected to the arch bridge construction load, its strength and stability is very important.
由于拱架是整个拱桥拱肋施工的直接支撑结构，所以拱架本身的强度和稳定性就显得特别重要。
This paper proposed the methods for distribution and safety check of bearing force of multi-layer reinforced concrete structure in construction and construction load in related floors.
提出多层钢筋砼结构在施工期间，施工荷载在各相关楼层间的分配及承载力安全性复核的方法。
Intersecting joint has become the major one in steel tube structure, for its advantages in load-carrying capacity, steel-saving, simple construction, legerity, elegance and so on.
而相贯连接钢管结构更以其受力性能好、节约钢材、施工简单、轻巧优美等优点成为目前钢管结构中最主要的结构形式之一。
If the excavation is more than 4 meters in depth, he will assign a Civil Engineer to provide a load calculation, shoring design and oversee the shoring construction during excavation.
如果挖掘深度超过4米，要指派一名土建工程师进行负荷计算、支护设计并在开挖期间监督支护施工。
In this article, the author analyzes the causes of abnormal static load test of pipe pile in soft soil stratum, puts forward reasonable advices from design and construction aspect.
对软土地质条件下管桩静载荷试验异常原因进行研究分析，从设计和施工角度提出了合理建议。
A loader is a type of construction equipment (engineering vehicle) machinery that is primarily used to "load" material into another type of machinery (dump truck, conveyor belt, rail-car, etc.).
装载机是一种主要用于向另一种机械(自卸车、输送皮带、铁路运输车辆等)“装载”物料的建设机械(工程车辆)设备。
The technique to reactivate the "dead" element step by step is employed in the design so as to simulate the changes in stiffness and load of the steel structure in the construction process.
在设计中运用将“死”单元逐次激活的技术，对钢结构在整个施工过程刚度和荷载的变化情况进行模拟。
The lowest part of a construction member. That which bears the load.
建筑中最底、承受负荷的那层。
It can be reflected not only by the division of container load center and lateral container port but also the construction of network of container transportation.
这种改变不仅体现在集装箱枢纽港和支线港的分化，而且体现在集装箱运输内陆网络体系的建设上。
The accuracy of power load forecasting is significant to the reasonable planning and construction of power system.
电力负荷预测的准确性对于电力系统的合理规划与建设意义重大。
In the process of structure construction, the structural system, boundary constraint conditions and load distribution are constantly changing.
在结构施工过程中，结构受力体系、边界约束条件、荷载分布在不断的改变。
The structural features of the system, determination of initial pre-tension, dynamic functions, mechanical behaviors under load and the construction of main nodes, are introduced.
介绍了该体系的结构特点、初始预张力确定、动力特性、荷载作用下的力学性能，以及主要节点构造等。
This paper states the temperature stress and load value, puts forward the conformation measures of crack control in structural design and construction.
本文论述了温度应力、温度荷载的取值，并根据实际情况提出了结构设计和施工时裂缝控制的构造措施。
II construction should be two two-circuit transmission line load power requirements.
二类建筑应按二级负荷的两回线路要求供电。
The nature of single-skinned construction allows us to see and understand the layers of a building - the load bearing structure, the bracing, the cladding and the ornament.
单层表皮的本质使我们能够看到并理解建筑物各层级的关系——承重结构、支撑、覆层和装饰。
Aiming at the problem of net-shell connector's rated load not meeting the requirement of overhead transmission line construction, a special traction tube was developed to help with tension stringing.
针对网套式连接器的额定载荷目前还不能满足架空输电线路工程施工要求这一问题，为方便张力放线试制了一种专用的牵引管。
The system disposition is characterized by good physical dispersivity, high reliability, light load for main machine, high precision, less construction cost and so on.
该配置具有物理分散性好、可靠性高、主机负荷轻、精度高、施工费用少的特点；
Yacht marina, transport marina, travel marina, pontoon, passenger transport marina, fishing marina, piling dock, heavy load dock, caisson dock, engineering consulting, design, construction.
游艇码头、交通码头、旅游码头、客运码头、 渔人码头、高桩码头、 重力码头、沉箱结构码头、浮动码头、浮桥、工程咨询、设计、施工。
For box girder structure which is applied extensively in bridge construction, the traditional analysis method of load is of comparatively bigger error.
由于箱梁结构广泛应用于桥梁建设中，而传统的受力分析方法存有较大的误差。
On the other hand, the construction live load factors increase with the increase of the reliability index.
营建活载重因子随著可靠度指数的增加而增加。
Author introduces the design key points, construction measures at some special joints, basement disposal, load tests, and construction effect of a gate scaffolding applied in a project.
介绍了某工程采用门式模板支架的设计要点，在一些特殊节点所采取的构造措施，基础处理和荷载试验，以及施工所取得的效果。
Because of length limit, the single tubular bus requires welding several tubular buses during construction, resulting in large amount of welding load.
管母的单根长度有限，在施工中要将几根管母焊接起来，焊接的数量较多。
Concrete was chosen for the construction of the load-bearing structure of the whole, due to its thermal and acoustic qualities and cost-effectiveness.
选择混凝土结构作为承载结构，是由于其热和声学品质以及成本效益。
The thesis focuses on the construction of the database and management platform of database dealt with the great number of data of load modeling research.
在负荷建模的研究过程当中，利用采集的大量数据建立数据库并建立数据库管理平台是本文的论述重点。
As a new kind of load-carrying member, FRP bridge decks have a promising future in the construction and rehabilitation of the bridge engineering.
作为新一代桥梁承重结构，FRP桥面板在桥梁建设和桥梁维修与改造工程中具有十分广阔的应用前景。
The control of load sensing is an advanced hydraulic technology which is demonstrated with the trend of application in construction machinery.
负载传感控制作为一种先进的液压技术，近几年在工程机械上展现了其应用趋势。
The wall of construction, as the main component, is not only the load - bearing structure of the entities, but also the culture of human vector detail.
墙作为建筑的主体构件，它不仅是结构的承重实体，同时也是人类文化思想的细部载体。
After testing pile and determining the load bearing capacity of single pile, the single piling method is adopted for construction.
采用沉管灌注桩法处理软土地基，经试桩并确定单桩承载力后，采用单打法进行施工。
应用推荐