The title compound has been obtained by the reaction of copper powder with sulfur powder, potassium sulfide and 3-methylpyridine at ambient temperature and normal atmosphere.
采用铜粉、硫粉、硫化钾及3-甲基吡啶在常湿、常温下直接合成了标题化合物。
The conductive mechanism of copper powder acrylate adhesive composite was discussed.
从理论上讨论了铜粉丙烯酸酯胶粘剂的导电机理。
The method adopts hypergravity fields to intensify the electrolysis of the copper powder.
本方法采用超重力场来强化电解铜粉。
The preparation technology and study status of silver-coated copper powder were introduced.
介绍了银包铜粉的制备工艺及研究现状。
During the electrolytic process, ultrasound is introduced to produce nanometer copper powder.
在一定的电解工艺条件下，引入超声波成功制备出纳米铜粉。
SEM photos reveal that the nickel coated copper powder has satisfactory morphology and flaky degree.
SEM照片显示，镍包铜粉形貌较好，片状化程度较好。
The experimental results show that the fine copper powder prepared under optimum condition meets well the …
结果表明，在优化条件下所得微细铜粉性能完全符合电子浆料用铜粉的要求。
The tribological properties and the anti-wear of micron copper powder in greases are investigated by four-ball test.
通过四球试验 ，考察了软金属微米铜粉在润滑脂中的摩擦学行为和抗磨性。
The tribological properties and the anti-wear of micron copper powder in greases are investigated by four-ball test.
通过四球试验，考察了微米铜粉在润滑脂中的摩擦学行为和抗磨性。
The paper summaries preparation method and application of nano copper powder and proposes its future research interest.
综述了纳米铜粉的应用及制备方法，对今后的研究方向进行了展望。
The invention discloses a direct reduction generator for copper powder with low apparent density and a process thereof.
本发明公开了一种低松比铜粉直接还原发生器及工艺。
The preparation of nanometer copper powder by chemical reduction combined with homogeneous precipitation method is studied.
研究了以化学还原法与均匀沉淀法相结合的方法制备纳米铜粉。
The preparation process flow of conducting paint and silver plated flake copper powder as conducting filling were introduced.
介绍了导电漆、作为导电填料的片状镀银铜粉的制备工艺流程。
The preparation technology and application of nanocrystalline copper powder are summarized and flow-levitation method introduced.
本文综述了纳米铜粉的制备技术及其应用。
We get the conclusion that the microstructure evolution of electrolytic copper powder and atomizing copper powder was different in SPS process.
得到电解铜粉和雾化铜粉在SPS烧结过程中显微组织演变特征和规律不同的结论。
In another aspect, a method is provided that includes forming brass from zinc powder and copper powder in the presence of a sodium electrolyte.
另一方面，提供一种方法，该方法包括在钠电解质存在下由锌粉和铜粉形成黄铜。
Ni-based composite shielding coating has been prepared, the nickel coated Copper powder are used as composite fillers, and acrylic resin as binder.
制备出的镍包铜复合粉体以丙烯酸树脂作为粘结剂，按照涂料制备的方法，制备了一种能屏蔽电磁波的复合涂料。
The factors affecting on the infrared extinction performance of smoke agent based on copper powder and high nitrogen energetic compounds(HNEC) were studied.
研究了含高氮含能化合物的铜基红外干扰烟幕剂的配方及影响配方性能的主要因素。
Compared the compound porous metal with copper powder sintered porous metal, the results show that the former has smaller shrinkage rate and higher porosity.
结果显示，相比于铜粉烧结多孔材料，泡沫金属与铜粉烧结复合多孔材料具有更小的收缩率及更大的孔隙率。
A new process of producing electrolytic copper powder from anti-extracting bacterial leaching solution from copper ore of Ziji Mount Gold-Copper Mine was developed.
研究了直接利用紫金山金铜矿的铜矿细菌浸出反萃含铜溶液生产电解铜粉的新型工艺。
The preparation procedures of nano-scale copper powder are introduced and commented in detail. The problems thereof and the future development trends are pointed out.
详细介绍了纳米铜粉的各种制备方法，并对各种方法进行分析评价，指出了存在的问题及其研究方向。
Stir completely about 20 minutes after add copper powder to the product, ensure the paint's viscosity uniformity, leave it for 30 minutes to let the bubbles disappear.
产品加入铜粉后充分搅拌20分钟，应保证油漆黏度均匀，静置30分钟消泡。
PTFE composites filled with irregular bronze powder have better mechanical properties, but PTFE composites filled with spherical copper powder have better wear resistance.
不规则青铜粉填充的PTFE复合材料具有较好的力学性能，但是球形铜粉填充的PTFE复合材料具有较好的耐磨损性能。
While adopting the indissoluble anode to electrolyze, it can play a role in controlling the grain size of the electrolytic copper powder effectively, but the output is lower.
采用不溶性阳极进行电解时，能够有效地起到控制铜粉粒度的作用，但产量较低。
Electrolytic process is an important method of producing copper powder, two important parameters of which are particle size of copper powder and efficiency of cathode current.
电解法是制备铜粉的一种重要方法，铜粉的粒径和阴极的电流效率是其两个重要的指标。
Silver-copper powder was prepared by plating silver on micron sized copper powder, its properties were examined, and the test results obtained were then analyzed in this discussion.
采用化学沉积法在微米级铜粉上镀银，并对得到的镀银铜粉的性能进行测试，对得到的结果进行了分析。
The relationship between the surface's unit resistance of the film with contents of silver plated copper powder and its particle size, and the contents of coupling agent were studied.
分别研究了漆膜表面单位电阻与镀银铜粉的含量及其粒径以及钛酸酯偶联剂的含量之间的关系。
Experiment indicates that after adding ammonia the tungsten's disturbance can be eliminated so the copper content can be determined by iodine method in the mixed tungsten copper powder.
实验表明，加氨水可以消除钨的干扰，从而确定了碘量法快速测定钨铜混合料中铜的分析方法。
The catalyst system consists of solid strong acid ion exchange resin, organic solvent and copper powder in certain proportion, and the reacted catalyst system may be recovered for reuse.
该催化系统由固体强酸离子交换树脂、有机溶剂和铜粉以一定比例组成，该催化系统在反应后可再回收循环利用。
The catalyst system consists of solid strong acid ion exchange resin, organic solvent and copper powder in certain proportion, and the reacted catalyst system may be recovered for reuse.
该催化系统由固体强酸离子交换树脂、有机溶剂和铜粉以一定比例组成，该催化系统在反应后可再回收循环利用。
应用推荐