The crankcase is the lower part of the engine cylinder block .
曲轴箱是发动机气缸体较低的部分。
We mainly produce the cylinder block and cylinder head castings.
我们主要生产汽缸体和汽缸盖铸件。
Position the cylinder heads onto head gaskets and cylinder block.
将汽缸盖安置到汽缸盖罩垫和汽缸体上。
This is fitted in the cylinder block and is driven by the chain drive.
机油泵安装在气缸体中,由链条驱动进行驱动。
Besides, the load caused by temperature field most affects the cylinder block.
温度场产生的载荷对气缸体影响最大。
Like the cylinder block, the head is made from either cast iron or aluminum alloy.
像气缸体一样,气缸盖是由铸铁或者铝合金制成。
Remove the crankshaft from the cylinder block (refer to Cylinder Block Disassemble).
从汽缸体上卸去曲轴(参看“汽缸体-拆卸”)。
The metallurgical quality of cylinder block and head of D114 diesel engine was analyzed.
对D114柴油机缸体、缸盖铸件冶金质量进行了分析。
Choose several group cylinder block with mix oil record go on experiment of comparing with.
选取了几组缸体与配油盘进行对比实验。
The features of cylinder block and cylinder head core assembly vertical casting process are introduced.
介绍了缸体、缸盖组芯立浇工艺的特点。
Cylinder block: Dragon door style cylinder block without liner and with water pump turbo house resisted.
缸体:龙门式、不镶缸套、水泵涡壳等零件都铸在缸体上。
Remove the engine cylinder head from the cylinder block (refer to cylinder head removal in this section).
程序用来从引擎区拆下引擎汽缸盖。
Cylinder block is an important part in motorcycle engine. There exists defects by conventional treatment.
气缸体是摩托车发动机的一个重要部件,采用常规方法处理存在缺陷。
The mechanism consists of several parts like crankcase, cylinder block, pistons, connecting rod, crankshaft, etc.
这一机构有一系列部件组成,如曲柄箱、气缸体、活塞、连杆、曲轴等。
The root causes of motorcycle cylinder block wearing are temperature variation and presence of hard abrasive dust.
摩托车发动机气缸磨损的根本原因在于温度的变化和硬质磨粒的存在。
This equipment specially used for engine cylinder block and head of water jacket and oil leakage of tao detection.
本设备专门用于对发动机缸体、缸盖水套及油道的泄漏检测;
Dial gauge with universal dial gauge bracket must be screwed to the cylinder block and placed against the crank arm.
百分表及通用百分表托架必须通过螺钉固定在气缸体上,位置与曲轴臂相对。
Sealing and lubricating fluid film between port plate and cylinder block of axial piston machines has complex shapes.
本文对轴向柱塞泵或马达缸体与配流盘之间的稳态油膜流动做了数值计算。
A entity model for the cylinder block of YC6108 diesel engine has been constructed and the modal analysis been implemented.
建立了YC 6108柴油机气缸体的实体模型,并进行了有限元模态分析。
The oil pan and the lower part of the cylinder block together are called the crankcase; they enclose, or encase, the crankshaft.
油盘和气缸体的下部一起被称为曲轴箱,用来封闭或罩住曲轴。
The application of quality control spot in foundry reduces the scraps of cylinder block from 45.9% to about 20% of total scraps.
机体因造型紧实度差而产生的废品约占总废品的45.9%,应用质量管理点后下降到20%左右。
The results show that the FEM offers the basis for the strength evaluation of cylinder block and design improvement of many schemes.
分析结果表明,采用此有限元方法可为机体的强度评估和多方案改进设计提供依据。
The conclusions are employed in cold-setting furan resin sand mould (core) in production of cylinder block of heavy marine diesel engine.
所得结果在呋喃树脂自硬砂型(芯)大型船用柴油机缸体铸铁件生产中得到验证和应用。
This paper analyse the dynamic characteristics of cylinder block of type ZS1105 D. I. diesel engine applying test mode analysis technique.
应用试验模态分析技术对ZS1105直喷式柴油机机体的动态特性进行了分析、研究。
The numerical simulation of thermal stresses and deformation of an engine cylinder block casting was carried out by FDM/FEM integrated system.
对发动机气缸体铸件从浇注完到开箱落砂后的铸造过程应力场进行计算机数值模拟。
The joint between the cylinder block and the head must be tight and able to withstand the pressure and heat developed in the combustion chambers.
气缸体与气缸盖之间的结合处必须保持密封,并且能够承受燃烧室产生的高压和高温。
The joint between the cylinder Block and the head must be tight and able to withstand the pressure and heat developed in the combustion Chambers.
气缸体与气缸盖之间的接合处必须保持密封,并且能够承受燃烧室产生的高压和高温。
The joint between the cylinder Block and the head must be tight and able to withstand the pressure and heat developed in the combustion Chambers.
气缸体与气缸盖之间的接合处必须保持密封,并且能够承受燃烧室产生的高压和高温。
应用推荐