The plume may extend into the cylinder bore a distance corresponding to the piston position.
羽流可延伸到汽缸膛中对应于活塞位置的一段距离。
Analyses the formation reasons, common characteristics and influence factors of diesel engine cylinder bore cavitation.
分析了柴油机缸套穴蚀形成原因、特征及其影响因素。
The split of the big end is sometimes at an angle, so that it is small enough to be withdrawn through the cylinder bore.
大头的裂口有时有一个角度，以便足够小通过气缸。
An integral contact model was established to analyze the cylinder bore deformation of model 493 automotive diesel engine.
建立了493车用柴油机缸孔变形的整体接触关系模型，提出了缸盖垫的非线性组合模型及缸套圆环模型。
Hot load and mechanical load coupling make piston to produce crackle, piston-ring glued and scuffing of cylinder bore and so on.
热负荷和机械负荷耦合将导致活塞产生裂纹、活塞环胶结以及拉缸等。
The process and economic benefit of laser heat treatment of cylinder bore for high speed diesel engine are described in this paper.
介绍了高速柴油机缸孔激光热处理工艺及其经济效益。
The honed cross hatch in cylinder bore of engine and the cylindricity of cylinder bore shall affect directly the operating mode and life of engine.
发动机缸孔平台网纹珩磨得是否合理和缸孔圆柱度的优劣直接影响到发动机的工况和寿命。
The experimental investigation on burning vaporised methanol in single cylinder testing engine with a cylinder bore of 130 mm through a vaporizer is presented in this paper.
本文介绍了在130单缸试验机上采用甲醇蒸发器掺烧甲醇的试验研究。
Reciprocating pumps convert rotary motion to linear motion. Pump speed in RPM determines the pumps output volume for any given combination of cylinder bore and piston stroke.
循环泵将曲轴旋转运动转化为柱塞的直线运动。泵速转每分钟决定了任何气缸和活塞组合的排泵量。
The parameter design of the plastic piston ring refers to designing the piston ring thickness, piston ring axial height and piston ring linear expansion in case that the cylinder bore is known.
塑料活塞环结构参量的设计是在缸径为已知量的前题下，分别对活塞环厚度、活塞环轴向高度、活塞环线胀量等进行设计。
The PST slide provides smooth precise linear motion with high accuracy at twice the thrust of a single bore cylinder.
PST的幻灯片提供平滑精确的以两倍于一个单一的缸孔精度高推力直线运动。
The Bore is the diameter of the cylinder. The stroke is the distance the piston travels from BDC (Bottom dead center) to TDC (top dead center). The Bore is always mentioned first.
内径指的是气缸的直径；行程是活塞从下止点运行到上止点的距离。表述时，内径总是写在前面。
Bore and STROKEThe size of an engine cylinder is referred to in terms of the Bore and stroke.
发动机气缸的尺寸与内径和行程有关。
The Large Bore a Series is an NFPA Interchangeable cylinder line that is designed and built to excel in the most demanding applications.
大口径a系列是美国消防协会可互换的缸线，是设计和建造擅长最苛刻的应用。
The diameter of the cylinder is called the engine bore.
气缸直径被称为发动机缸径。
The PST Series provides smooth precise linear motion with high accuracy at twice the thrust of a single bore cylinder.
PST的系列提供精确的顺利以两倍于一个单一的缸孔精度高推力直线运动。
When it comes to the monospaced chamfer at intersection line of orthogonal cylinder and cylindrical bore, however, no mature manufacturing method has been found yet.
圆柱体与孔正交相贯线处的等宽倒角，现今还没有成熟的加工方法。
No visible corrosion on the piston and bore of cylinder where contact with seal.
没有可看见的联络以封印圆筒的腐蚀在活塞和打扰。
By checking the wall thickness, strength and stiffness of expanding bore cylinder, the article verifies the feasibility of return utilization of invalid cylinder after being expanded bore rehab.
通过对扩镗后的缸筒壁厚、强度及刚度的验算，证明了废旧缸筒扩镗修复后再利用的可行性。
The Tiny Titan Series is a small bore, square end cap cylinder line that is designed to excel in applications where space limitations are of the utmost importance.
这种微小的泰坦系列是小口径，方形端盖缸行的目的是追求卓越，空间限制的应用是极其重要的。
Abstract :A novel bore brush electroplating technology was applied in remanufacturing for internal surface of failed engine cylinder body.
采用新型的内孔电刷镀技术对失效的发动机缸套内表面进行了再制造。
The diameter of the cylinder is called the engine bore.
圆筒的直径称引擎打扰。
The bore (14) of the first end cap (6) is threaded to accommodate a complementary threaded connector (5) which, in turn, is connected to a cylinder of propane gas.
第一端盖（6）的孔（14）被攻丝以容纳完全互补的带螺 纹连接件（5），所述带螺纹连接件（5）接着连接到丙烷气体汽缸。
The bore (14) of the first end cap (6) is threaded to accommodate a complementary threaded connector (5) which, in turn, is connected to a cylinder of propane gas.
第一端盖（6）的孔（14）被攻丝以容纳完全互补的带螺 纹连接件（5），所述带螺纹连接件（5）接着连接到丙烷气体汽缸。
应用推荐