The design and analysis method of UML can enhance greatly reuse, transplanting, expansion and defence of software.
采用UML设计分析方法，可大大提高软件的复用性、可移植性、可扩展性和可维护性。
According to modularization designs for open NC system, one kind of hardware design and analysis method is introduced, which bases on DSP and CPLD to develop the motion controller.
针对开放式数控系统体系模块化设计问题，介绍了一种基于DSP和CPLD的运动控制器的硬件设计和分析方法。
So, it's very necessary to deeply research the principle of phase-locked system, capture the design and analysis method, set up IP library and afford ready design block for system.
因此，对锁相环进行较深入的研究，掌握其设计和分析方法，并完善IP库，为系统设计提供单元模块，是非常有必要的。
Combining JSP with another design method, such as Structured Systems Analysis and design (SSAD), entailed a lot of wasted effort and opportunities for error.
JSP和其他设计方法，如结构化系统分析和设计(SSAD)，联合，须要为错误浪费许多成果和机会。
Analysis and Design of data processing method and software subdivision.
数据处理方法与软件细分的分析与设计。
A new method for analysis and design of stereoscopic system.
一种新的立体视觉系统的分析与设计方法。
This paper, combining a contract management system case, introduces the analysis and design of this development method. It effectively settles these problems.
本文结合一个合同管理系统的开发，给出了这一开发方法的分析与设计过程，有效地解决了这类问题。
The influence of the refrigerating capacity in design and control is analysis in this paper, a control method to raise the running economy is suggested.
本文分析了制冷量在设计和控制各环节中的影响，给出了一种提高制冷器运行经济性的控制方法。
In order to applying distributed object technology in projects, it is necessary to analysis and design system with the software engineer method.
为了在工程中方便的使用分布式对象技术，应采用软件工程的方法对系统进行分析和设计。
The simulation results are coincident with the theory analysis ones. The simulation method and results possess an important reference value and guidance to engineering design and capability checkout.
仿真结果和理论分析结果相一致，所使用的仿真方法及得到的分析结果对工程设计及性能校核具有重要的参考价值和指导意义。
This method can be applied in the computer-aided design and analysis of arbitrary planar optical waveguide structures.
该方法可用于任意复杂结构的平面光波导的计算机辅助设计与分析。
This paper describes the technology and method in developing university laboratory's management information system by Object-Oriented analysis and Object-Oriented design.
主要论述了用面向对象的方法开发高等学校实验室信息管理系统的分析设计技术和过程。
This paper presents a reflection-based analysis and design method for non-functional feature which uses reflection to separate functional and non-functional feature.
文章提出了一种基于反射的非功能特性分析设计方法，该方法利用反射思想分离功能特性和非功能特性。
An analysis to the need of university laboratory management and a kind of design and realization method of the laboratory management system founded in the network are given.
对院校实验室管理自动化的需求进行了分析，提出了一种基于网络的实验室管理系统的设计和实现方法。
A numerical example shows that the structural analysis and optimization design model and method in this paper are valid and feasible.
算例表明：文中提出的随机结构分析和优化模型与设计方法是合理、可行和有效的。
It becomes an important task in DSS field to seek new and more effective method of analysis and design.
因此，寻求新的、更加有效的决策支持系统的分析设计方法成为该领域内的一个重要课题。
A design method for low phase noise agile X-band frequency synthesizer is presented, the theoretic analysis and calculation is performed and the test results are given.
介绍一种低相噪、捷变频x波段频率综合器设计方法，并进行理论分析、计算，最后给出测试结果。
The design scheme, the model of data analysis and the method of system realization of this paper are valuable to build up the data warehouse system of others fields.
本文探讨了数据仓库技术在农业呼叫中心的数据分析问题上的应用，其设计方案、数据分析模型和系统实现方法对其它领域建立数据仓库系统有一定的参考价值。
Finally, the effectiveness of the method for software structure analysis and design is verified by an application.
最后，通过应用实例验证了该方法对软件结构分析和设计的有效性。
In this paper, the stresses in a composite concrete pavement are analysed by means of finite layer method. Through calculation and analysis, a practical design method is presented.
本文采用有限层法对复合式水泥混凝土路面结构进行应力分析，通过计算与分析，提出了能满足精度要求的实用设计方法。
A reuse-oriented method for software analysis and design is presented.
提出了一种面向重用的软件分析与设计方法。
The system uses the Structured System Analysis and Design method.
系统使用了结构化的方法进行分析和设计。
We still adopt traditional method about the design and analysis of landing gear buffer system at present in China.
起落架缓冲系统的设计和分析，在我国主要还是采用传统的方法。
This paper introduces the design and implementation method for characteristic analysis system of electric locomotive. It mainly contains system object, system design and several key techniques.
介绍了电力机车特性分析系统的设计方法与实现技术，主要包括系统目标、系统设计及设计中的几项关键技术。
A kind of effective thought of design and method of analysis for determining the CAM profile of parallel indexing CAM mechanism was introduced.
介绍一种确定平行分度凸轮机构凸轮轮廓的有效设计思路和分析方法。
The assembly tolerance analysis and optimization method based on digital product design model is put forward according to the analysis of digitalization preassembly method.
通过对数字化预装配方法的分析，提出了基于数字化产品设计模型的装配公差分析和优化方法。
So, the analysis and design method in this paper is available for practical engineering design.
因此本文的分析与设计方法可供工程实际应用时参考使用。
Finally realized perception expression from analysis model to design model according to perception expression method, and reflected the visual analysis result to the design model.
最后通过感知表达方法实现分析模型到设计模型的感知表达，将分析结果可视化反映到设计模型上。
Finally realized perception expression from analysis model to design model according to perception expression method, and reflected the visual analysis result to the design model.
最后通过感知表达方法实现分析模型到设计模型的感知表达，将分析结果可视化反映到设计模型上。
应用推荐