Study on dynamic performance of multi-DOF electro-hydraulic servo system;
提出了电液伺服系统的支持向量机的辨识建模方法。
A digital electro-hydraulic servo system based on 1553b bus was introduced.
介绍了一种基于15 5 3b总线的数字式电液伺服系统。
The application of electro-hydraulic servo system to the tilting car body structure is discussed.
就电液伺服系统在可倾车体结构中的应用进行了讨论。
In recent years, electro-hydraulic servo system has been applied to aviation and metallurgy fields etc. widely.
近年来，电液伺服系统已经被广泛地应用于航空、冶金等重要领域。
So it is very important that studying the real-time control and advanced control method of Electro-hydraulic Servo System.
因而对电液伺服系统的实时控制和先进控制方法的研究具有非常重要的意义。
However, with the increasing of control quality request, the status of electro-hydraulic servo system PID control fluctuates.
然而，随着人们对控制品质要求的不断提高，电液伺服系统中pid控制的地位发生了动摇。
This paper proposes the order and parameter identification of electro-hydraulic servo system by multi-variable time series CAR.
本文提出了用多变量CAR时序模型来辨识电液伺服系统的阶和参数。
In recent years, electro-hydraulic servo system has widely been applied to aviation, spaceflight, shipping and metallurgy fields etc.
目前，电液伺服系统已被广泛地应用于航空航天、船舶、冶金等重要领域。
Then, the application of PID control, optimal control and pole assignment method in the electro-hydraulic servo system are all developed.
然后，作者研究了PID控制、最优控制和极点配置方法在所设计的电液位置伺服系统中的应用。
The results show that the DDVC electro-hydraulic servo system applied to civil engineering structure vibration active control is feasible.
结果表明，将直驱式电液伺服系统应用于土木工程结构振动主动控制上是可行的。
The actualization method of the direct drive electro-hydraulic servo system was introduced, and the mathematic model of the system was built.
介绍了直驱式电液伺服系统的实现方案，并建立了系统的数学模型。
Though choosing the appropriate hydraulic components, finally the mathematical model of the electro-hydraulic servo system will be established.
通过选择合适的液压元件建立整个电液伺服系统的数学模型。
The electro-hydraulic servo system directly controlled with speed variable pumps is a competitive and environmental beneficial driving principle.
介绍新提出的用变转速液压泵闭环控制的差动缸电液伺服系统。
To build up a test-bed for DDVC electro-hydraulic servo system, taking the experiment in order to verify the correctness of the mathematical model.
搭建了直驱式电液伺服系统的试验台，对系统进行了试验研究，从而验证了数学模型的正确性。
At first, the status and development of electro-hydraulic servo system and its control method both home and abroad at present are discussed in the paper.
文中首先论述了目前国内外在电液伺服系统及其控制策略方面的研究状况和进展。
For the establishment of the submarine propulsion electro-hydraulic servo system model, the paper USES two modern control methods to achieve their control.
针对建立的潜器推进电液伺服系统的模型，本文采用了两种现代控制方法实现对其的控制。
It is demonstrated that direct drive electro-hydraulic servo system can replace the traditional electro-hydraulic servo system in the low frequency response.
结果表明，在频响不高的场合直驱式电液伺服装置完全可替代传统的电液伺服装置。
Establishing the mathematical model of electro-hydraulic servo system is the key to analyze and design control system and base of studying control means in effect.
电液伺服系统数学模型的建立是控制系统分析和设计的首要问题，是有效研究控制策略的基础。
That is decided mainly by the typical unknown and uncertain nonlinear system of electro-hydraulic servo system, which gains precise maths model of system difficultly.
这主要是由电液伺服系统的典型未知不确定性和非线性特性所决定的，使得系统精确的数学模型难以获得。
In this paper, the optimal regulator of an electro-hydraulic servo system is designed by using the quadratic theory, and the optimal regulating is realized through simulation.
文中应用二次型理论对一实际的电液伺服系统进行了最优调节器的设计，并通过仿真实现了系统的最优调节。
In this paper, the electro-hydraulic servo system is valve-controlled motor, mainly include electro-hydraulic servo valves, amplifier, hydraulic motors, and other feedback components.
本文中电液伺服系统为阀控马达系统，主要包括电液伺服阀、放大器、液压马达、反馈元件等。
Through the research of the structure of extension controller, the extension control algorithm was improved, and the extension controller was applied in the electro-hydraulic servo system.
在对可拓控制器的结构进行深入研究的基础上，对可拓控制算法进行了改进，并将这类可拓控制器应用于电液伺服系统中。
This article takes PROFIBUS as tool, USES the hydraulic servo system as the research object, and proposes digital self-diagnosis electro-hydraulic servo system research plan based on PROFIBUS.
本文以PROFIBUS总线为工具，把液压伺服系统作为研究对象，提出了基于PROFIBUS现场总线的数字式自诊断电液伺服系统的研究方案。
A method of the electro hydraulic servo system identification modeling is presented based on support vector machines.
提出了电液伺服系统的支持向量机的辨识建模方法。
According to fault characteristic of the electro hydraulic servo system, this paper has proposed a fault tolerant project that USES the fuzzy neural network as an identifier on-line.
根据电液伺服系统的故障特点，本文提出了采用模糊神经网络做在线辨识器的容错控制方案。
This paper studies the dynamic characteristics of Electro hydraulic Position Servo System, and proposes a method of equivalent flow feedback to realize serial control.
针对单回路电液位置伺服系统的动态特性，提出了一种等效流量反馈的控制方法，从而实现了串级控制。
The paper also gives a case of the electro-hydraulic position servo control system to prove the validity of the proposed ILC.
本文还给出了提出的迭代学习控制律在一个电液位置伺服控制系统中的应用实例，来验证算法的有效性。
The results prove that Neural-PID can solve the problem of the electro-hydraulic position servo system and it is a practical and feasible control tactic.
实践证明，神经PID控制策略能较好地解决电液位置伺服系统存在的问题，是一种实用可行的控制策略。
The results prove that Neural-PID can solve the problem of the electro-hydraulic position servo system and it is a practical and feasible control tactic.
实践证明，神经PID控制策略能较好地解决电液位置伺服系统存在的问题，是一种实用可行的控制策略。
应用推荐