A emulsion process of lipid angiogenic factor (LAF) was developed.
作者建立了脂质血管生长因于(LAF)的乳化方法。
The gelatin microcapsules of SOD were prepared with emulsion process using gelatin as load material.
以明胶为囊材,乳化法制备了SOD明胶微囊。
Since the chemical composition of crude oil is complicated and many other factors affect the emulsion process, it is difficult to choose exact demulsifying agent for exact oil.
由于原油组成的复杂性,加上影响形成乳化原油的因素众多,给原油破乳剂的研究工作带来许多困难。
Objective To determine the nasal baicalin emulsion formulation and preparation process.
目的确定鼻用黄芩苷乳剂处方及制备工艺。
Various factors influencing the strip steel surface cleanliness were analyzed, including the type and performance parameters of emulsion, emulsion systems and rolling process parameters.
分析了影响带钢表面清洁度的各种因素,包括乳化液类型及性能参数、乳化液系统和轧制的工艺参数。
The Building coating was prepared with addition of a certain amount of organo-siloxane for copolymerization in the process of polymerization of styrene and acrylic emulsion.
在苯乙烯-丙烯酸乳液聚合过程中,加入一定量的有机硅氧烷进行共聚,制得建筑涂料。
Heavy oil emulsion visbreaking can alternate the process of blending light oil in heavy oil and electrical heating of super - heavy oil, but has not been broadly popularized yet.
稠油乳化降粘工艺技术具备替代稠油掺稀油及超稠油电加热两种工艺技术的优势,但一直未能得到大面积推广使用。
This paper discuss the mechanism and process of making emulsive moistureproof dope for corrugated board with scrap polystyrene foam by selecting proper commix impregnant and emulsion.
本文叙述了以废弃的聚苯乙烯泡沫塑抖为原料,选择合适的混合溶剂和乳化剂制取水乳性瓦楞纸箱防潮涂料的机理及过程。
Emulsion breaker, equipment or a process such as a heater, mechanical device, electrostatic treater, or chemicals that break up an emulsion into its components.
破乳装置是仪器或一种工艺如加热器,机械装置,静电处理器或者一种把乳化剂分解成它的成份的化学剂。也叫破乳剂。
Real time optimization system of process industry is built in this paper, and is applied to low-temperature styrene and butadiene emulsion polymerization.
本论文建立了过程工业的实时优化系统,并将其应用于低温乳聚丁苯橡胶装置。
Introduce the different factors and principle in the formulation and process of water in oil emulsion system. The water in oil emulsifiers produced in Uniqema are also introduced.
论述了影响油包水乳化体系稳定性的因素、油包水的配方设计原则以及油包水的生产工艺的控制和调整,并介绍了有利凯玛公司的油包水乳化剂。
The formulation, production process and technical specification of the primer and surfacer primer of waterborne anti- rust emulsion paint are introduced.
介绍了水性防锈乳胶底漆和中间漆的配方、生产工艺及性能指标。
The process of manufacturing emulsion products and its capacity indexes have been analyzed in this paper.
本文分析了乳胶制品的生产过程,并对工序能力指数进行了分析,从而推断出产品的质量。
In the article the process flow, reagents prescription for manufacture of water emulsion type waterproof coating by using spent polystyrene and test method of product performance were reviewed.
介绍了利用废聚苯乙烯泡沫塑料制备水乳型防水涂料的工艺流程、配方及其性能测试方法。
The latex particles size and size distribution in emulsion copolymerization process of butadiene-styrene were determined by dynamic laser scattering.
用动态激光光散射法测定了丁二烯-苯乙烯乳液聚合的乳胶粒子的粒径及其分布。
The treatment process for emulsion wastewater was conducted by using microwave irradiation technology.
采用微波辐射技术,对模拟乳化废水进行微波辅助化学破乳处理工艺研究。
According to dynamic principle, this paper describes the dynamic process of purifying emulsion using electromagnetic technique.
利用动力学原理分析了电磁方法净化乳化液的动态过程。
The article introduces direct stencil making process with diazo sensitive emulsion. It also offers technical specifications and some recommendations.
文章介绍了用重氮系感光乳剂直接制网版工艺并对技术问题作了分析。
The selection and field test of low temperature and high efficiency demulsifiers were conducted, according to property of emulsion and characteristics of process flow of the field.
针对该气田浮化液特性和生产工艺流程的特点,进行了低温高效破乳剂的筛选与现场试验。
The effects of solvent, temperature, additive and separation time on the refinement process of crude anthracene by using emulsion-crystallization were reported.
采用乳化结晶法,研究了粗蒽精制过程中溶剂、温度、助剂及分离时间的作用。
The growing maturity of emulsion production process and further studies on the emulsion excipient, are creating favorable conditions for development and production of the drug-containing emulsion.
随着日益成熟的乳剂生产工艺和乳剂辅料的研究不断深入,为含药乳剂的开发生产创造有利的条件。
The invention adopts a nucleocapsid emulsion polymerization process to prepare a polyacrylic acid resin III material for medicine coating.
本发明采用核壳乳液聚合工艺,制备用于药物包衣的聚丙烯酸树脂III材料。
An emulsion liquid membrane extraction process was performed to recover oxytetracycline from the fermentation wastewater.
在萃取的基础上,进行了乳状液膜分离萃取发酵废液中土霉素的试验研究。
For the proposed project wire drawing process will be performed in an emulsion-rich condition and wire-drawing dust produced in the process is wrapped by emulsion.
拟建项目拉丝生产过程在富含乳化液的环境中进行,加工过程产生的拉丝粉尘均被乳化液裹覆。
The process includes the waste purification from oil emulsion in Tilted-Plate Separator and the suspension separation in the downward-flow sand-gravel filter.
处理方法包括使用倾斜盘式分离器分离油乳化剂,使用下流式砂砾过滤器分离悬浮颗粒物。
It is shown that conventional emulsion polymerization process leads to high gloss film and soap-free or micro-soap processes will lead to good water resistance and lower foaming.
研究表明采用常规乳液聚合涂膜的光泽较高,而采用无皂和微皂乳液聚合涂膜的耐水性较好,涂料的起泡性较低。
Several interchangeable stator heads, covering a wide application areas, including cosmetics such as emulsion and any necessary mixing mortar, crushing, suspension and dissolution process.
几种互换的定子头、覆盖了一个广阔的应用领域,包括化妆品乳剂以及胶浆等任何需要搅拌、粉碎、悬浮和溶解的过程。
An elastic emulsion has been prepared by use of pre emulsification process.
采用预乳化工艺制备了弹性水乳型合成树脂。
An elastic emulsion has been prepared by use of pre emulsification process.
采用预乳化工艺制备了弹性水乳型合成树脂。
应用推荐