The original external diameter of lateral plantar artery is 2.
足底外侧动脉始端外径，男性为2。
Height, Internal Diameter, External Diameter out of specification.
高度，内径，外径与规格不符。
This paper defines the curve triangle and its internal diameter and external diameter.
定义了曲线三角形及曲线三角形的内径与外径，并给出了它的内径和外径公式。
This paper defines the curve triangle and its internal diameter and external diameter.
这篇论文介绍如何使用三角曲线进行轨迹合成。
Dissection the superficial branch of superior gluteal artery and measurement its external diameter;
解剖臀上动脉的肌皮穿支并测量其外径。
The external diameter of the middle part of each guiding expansion head is larger than that of the through pipe.
导向扩张头中部的外直径大于通管的外直径。
Fit the dial gauge with some preload and measure the lateral runout at the greatest external diameter of the brake disc.
在带有一定预载的情况下安装百分表，然后测量制动盘最大外径处的横向跳动。
A new reflection method to measure the external diameter and the thickness distribution of the quartz tube is described in this paper.
本文介绍了反射法测量石英管外径及壁厚的原理和方法。
A metal ball can be absorbed by the magnet when the ball falls down. Its external diameter is larger than the diameter of the control mouth.
及一金属圆球，可脱落地受该磁铁磁性吸附，其外径系大于管制口的口径。
The external diameter of the branches of the internal iliac artery measured on cadavers was significantly smaller than that on patients alive.
在尸体上所测盆腔内中、小血管直径较动脉造影结果小，有显著差异。
The system design variables are magnet external diameter of internal ring, internal diameter of external ring, depth of groove - ring and ampere turns.
系统设计变数为磁铁内环外径、外环内径、槽口深度和安匝数。
Results: (1) the position and external diameter of peroneal artery, its accompanying vein and the distribution of fibular nutrient artery were observed.
结果：(1)观测了腓动脉及其伴行静脉起点的位置和外径及腓骨滋养动脉的分布。
The adopted technology scheme is: the reactor 2 adopts the straight tube with large external diameter and thin catalyst. The evaporating superheater 16 has the tubular structure.
所采用技术方案是，反应器2采用大外径、薄催化剂层的直管状，蒸发过热器16为列管式结构。
The center frame has simple structure and convenient use, can be used for processing a long axis whose external diameter is irregular and also can be used for manufacturing carrying rollers.
本实用 新型结构简单，使用方便，可以用于加工外径不规则的长轴外，还可以用于制作托辊。
The stability of external pressure vessel mainly depends on crust's geometrical cross-section including diameter, length and wall thickness. Among them, the length and diameter are crucial.
外压设备的抗失稳能力(稳定性)主要取决于壳体的几何尺寸，即直径、长度和壁厚，其中长度和直径起着决定性作用。
The results show: external diffusion is control process for mass transfer, and increasing air velocity and decreasing particle diameter are effective measures to decrease mass transfer resistance.
研究结果表明：外扩散过程是传质的控制步骤，增大风速、减小吸附剂颗粒直径是减少传质阻力的有效措施。
External plastic or rubber material, laundry ball of about 5 centimeters in diameter.
外部是塑料或是橡胶材质，洗衣球直径约5厘米左右。
The results show: external diffusion is the main resistance for mass transfer, and increasing air velocity and decreasing particle diameter are effective measures to decrease mass transfer resistance.
研究结果表明，外扩散过程是传质的主要阻力，增大风速、减小吸附剂颗粒直径是减少传质阻力的有效措施。
Both have the same pitch diameter at the top of the hole of internal threads or end of the pipe on external threads, and both have the same thread lengths or depths.
在内螺纹的孔的顶端或者外螺纹的管的端部拥有相同的中径，而且拥有相同的螺纹长度和深度。
A type of tubing connection in which the internal or external surfaces are the same diameter throughout the tubing joint.
油管连接部位的一种类型。这时整个油管单根的内表面和外表面的直径都是相同的。
Effect of stress wave on larger diameter metal pipe was studied by numerical simulation under local external contacting explosion.
以大口径金属管道为对象，通过数值模拟研究了金属管道在局部外接触爆炸荷载作用下的应力波对其的效应。
The distribution pattern, critical location and concentration factor of the stress on equal diameter tees under both internal and external loadings are obtained.
得出了内压和外载下三通应力的分布规律、危险点的位置及其应力集中系数。
The average radial clearance, body clearance diameter of the external channels and rolling direction.
平均径向间隙，外部渠道和全身清除直径轧制方向。
Because of its much larger external surface area and much smaller pore diameter than granular carriers, it is expected to benefit diffusion-controlled fast surface reactions.
因为纤维催化剂比粒状催化剂的外表面积大得多，而直径却小得多，因而予计对扩散控制的快速表面反应是有利的。
It is a process that produces polymer fibers with diameter in the sub-micron range under the action of an external electric field imposed on a polymer solution or melt.
它是一种借助于静电场作用对聚合物溶液或熔体进行纺丝的过程，它所形成的纤维直径为亚微米级。
This article introduces a new method for non-contact on-line external-diameter measurement of transparent tubing using an 1-dimensional CCD array.
本文介绍了一种用线列阵CCD器件非接触测量透明管件直径的装置。
This article introduces a new method for non-contact on-line external-diameter measurement of transparent tubing using an 1-dimensional CCD array.
本文介绍了一种用线列阵CCD器件非接触测量透明管件直径的装置。
应用推荐