Two new analytic methods of tall frame - shear wall structure are presented in this paper.
本文提出了两种高层框架—剪力墙结构的分析方法。
In shear wall structure and frame - shear wall structure the percentages are very close, they are all 32%.
剪力墙和框架一剪力墙结构相差不多，均为32%左右。
The frame-supported shear wall structure is a combination of frame and shear wall.
框支剪力墙结构体系是将框架结构和剪力墙结构相结合的产物。
The structural analysis, construction measurement and construction method of frame shear wall structure modification are elaborated.
阐述了框架—剪力墙结构改造中的结构分析、构造措施以及施工方法。
This engineering is eleven layer reinforced concrete frame shear wall structure.
本工程为十一层钢筋混凝土框架-剪力墙纸局。
Frames, shear wall, frame shear wall, frame tube and tube structures are included.
这些结构包括框架、剪力墙、框一剪、框筒和筒体结构。
As two bottom stories of frame shear wall in commercial building, the methods of anti earthquake design of upper laying structure were not dealed with in code.
作为商住楼的底部二层框架—剪力墙、上部砌体结构的抗震设计方法，在规范中并无涉及。
The general principle of frame shear wall structure design, selection of floor architecture, beam column layout, etc. are described.
介绍框架-剪力墙结构设计中的一般原则、楼面体系的选用、框架梁柱布置等问题。
The frame shear-wall system is adopted in design.
工程结构采用了框架-剪力墙体系。
Finally, analyze the failure features of low shear walls and the improving methods with the comparison between the shear walls in my model and those in a 6-storey frame shear wall model.
通过将模型中的剪力墙和一个6层的框架剪力墙模型中的剪力墙进行比较，分析低矮剪力墙的破坏特点以及改善的方法。
Quantitative evaluation of the economical performance of the brick masonry buildings with frame shear wall at the bottom is made, based on the analysis of the cost indexes calculated.
对该经济指标计算结果进行分析，从而对底框抗震墙砖房的经济性能作出定量评价。
This paper presents a method for predicting seismic damage of reinforced concrete frame-shear wall structures. The method can also be used for frame structures and shear wall structures.
本文提出了框-剪结构震害预测方法，并使框架、框-剪和剪力墙三种结构体系的震害预测统一起来。
The procedure for direct Displacement- Based Seismic Design ( DBSD) method of frame- shear wall structures is briefly introduced.
简述了框架-剪力墙结构直接基于位移的抗震设计过程。
In accordance with the characters of composite masonry structure building supported by frame shear wall with wide bay at bottom, a sub structure pseudo dynamic test was carried out.
针对底层大开间组合墙房屋的特点，对模型房屋进行了子结构拟动力试验，测定其抗侧刚度，发现了抽柱对结构性能的重要影响。
In recent years, the steel frame-shear wall structure system to get the more and more extensive application in our country.
近年来，钢框架-剪力墙结构体系在我国得到了越来越广泛的应用。
The structural behaviors under vertical and horizontal loads are analyzed with a steel frame model and an equivalent reinforced concrete frame-shear wall model respectively.
用纯钢框架模型和等效钢筋混凝土框架剪力墙模型分别计算结构在竖向荷载及侧向荷载组合下的受力性能。
The rigidity of shear wall linked with the ground is an important factor in influencing the safety and economic of the shear wall structure supported on frame-shear wall structure.
落地剪力墙刚度是影响框支剪力墙结构安全性和经济型的重要因素之一。
Quantity of earthquake resisting wall setup in frame-shear wall structure is key whether or not structure is safety, economy and reasonable.
框架—抗震墙结构中抗震墙设置数量的多少是框架—抗震墙结构体系是否安全、经济、合理的关键。
Hot-rolled seamless steel tube column, as the main vertical load-bearing member, plays the role of structure transferring between the cast RC frame shear wall and the steel roof truss.
以热轧无缝钢管柱为主要竖向承重结构构件，承担现浇钢筋混凝土框架剪力墙结构与钢屋架之间的结构转换作用。
Tie beam is an important element in frame-shear wall structure.
连梁在框架-剪力墙结构中，也是很重要的一个构件。
In this paper, the seismic reduction effectiveness and earthquake response of building with a twelve stories frame-shear wall structure adopting base seismic isolation is studied.
本文以一幢十二层框架—剪力墙结构作为研究对象，探讨采用基底隔震技术后的减震效果及其地震反应的特点。
The structure is divided into the upper frame structure and the lower frame-shear wall structure under the lateral earthquake action.
基于对框架剪力墙体系的认识，分析了上部框架-下部框架剪力墙结构在水平地震作用下的变形。
The paper puts forward a kind of calculating method for displacement, internal force and interaction of high-rise frame-shear wall structure under lateral load by using continuity method.
提出一种采用连续化方法对高层框架—剪力墙结构在侧向荷载作用下的位移、内力及相互作用的计算方法。
The formulas to calculate the mentioned parameter for semi-rigid frame-shear wall structure are deduced by introducing eduivalent area moment of inertia .
探讨了半刚性连接对框剪结构中剪力墙位移系数、弯矩系数、剪力系数和框架剪力系数等的影响；
For the masonry building with frame-shear wall on bottom stories, the plate design of the changing floor is very important.
在底部框架-抗震墙砖房设计中，转换层楼板的设计是十分重要的环节。
The frame structure with braces is a kind of structure which has more reasonable force bearing behavior and is more economic compared with the traditional frame-shear wall structure.
与传统的框架-剪力墙结构相比，斜撑框架结构是一种受力更为合理、经济的结构体系。
By use of the uniformization technique, a continuous computational model is developed for the analysis of frame-shear wall-thin walled core skew combined structures.
采用沿高度方向连续化的方法，建立了框架-剪力墙-薄壁筒斜交结构协同分析的连续化计算模型。
ANSYS is employed to model the semi-rigid concrete filled steel stub frame-shear wall structure.
使用ANSYS建立了半刚性连接钢管混凝土框剪结构的有限元模型。
The reinforced concrete frame column of a high-rise building with frame-shear wall structure partially has a vertical deviation during construction, thus affecting its structural function.
某框架-剪力墙结构高层建筑的钢筋混凝土框架柱，在施工过程中局部出现了超出规范允许值的垂直度偏差，影响了结构性能。
Some reinforced concrete aseismic walls must be considered in design on the longitude and transverse in the brick masonry building with frame-shear wall at lower two stories.
底部两层框墙砖房中，在底部两层的横向和纵向应设计一定数量的钢筋混凝土抗震墙。
应用推荐