Methanol is the most effective solvent for graft polymerization.
甲醇是接枝反应最有效的溶剂。
The results show that the PP film loses weight after the graft polymerization takes place.
实验结果表明,PP膜经过反应后,质量减少。
The effects of graft polymerization time and the polymerization initiated by BPO on the oil absorption oft…
重点考察了接枝聚合反应时间和后处理对树脂性能的影响。
The conditions of dielectric barrier discharge plasma initiation graft polymerization of linen are investigated.
研究了大气压介质阻挡放电引发亚麻接枝丙烯酸的工艺条件。
The influence of reaction temperature, initiator level. reaction time and rubber level on the graft polymerization was investigated.
考查了反应温度、引发剂用量、反应时间和胶用量对接枝共聚反应的影响。
It is found that the rate of graft polymerization increased with the increase of radiation dose, dose rate and monomer concentration.
发现接枝率随着剂量、剂量率及单体浓度的增加而增加。
In this paper a general review on the progress of modifying polymeric surface through UV - induced graft polymerization is presented.
本文总结了利用紫外光接技改性聚合物表面的研究进展。
The pretreatment of starch before graft polymerization within certain temperature range was favour of improvement of absorbability of products.
实验说明,淀粉在参加接枝聚合反应之前进行一定温度范围条件下的预糊化处理有利于最终产品的吸水性能;
It relates to reaction principle of cr with methyl-acrylate graft polymerization, formulation of adhesive solution and manufacturing technology.
叙述了氯丁橡胶与甲基丙烯酸甲酯接枝聚合的反应原理,胶粘剂溶液的配方以及制造工艺操作过程。
ATP was treated with four different modifier and next graft polymerization processed with butyl acrylate (BA), and the organic ATP were obtained.
采用四种不同的改性剂对凹凸棒土进行表面改性,接着与丙烯酸丁酯接枝得到有机化凹凸棒土。
The surface of polypropylene microporous membranes was activated by the graft polymerization of methyl methacrylate initiated with ultraviolet-photo.
通过紫外光引发甲基丙烯酸甲酯的接枝聚合,在聚丙烯膜表面引入了反应性基团酯基。
The mechanism and factors affecting graft polymerization of starch graft acrylamide copolymerization and the application of graft copolymer are reviewed in this paper.
本文综述了淀粉接枝丙烯酰胺共聚反应的机理、影响因素及共聚物应用情况。
Graft polymerization of acrylic acid onto maize starch using ceric ammonium nitrate, ammonium persulfate and ammonium persulfate sodium bisulfate as initiators is studied.
研究了以硝酸铈铵、过硫酸铵、过硫酸铵-亚硫酸氢钠为引发剂玉米淀粉与丙烯酸的接枝共聚反应。
The methods to modify the surface of inorganic particles with in-situ polymerization, including graft polymerization and emulsion polymerization, were reviewed in this paper.
文中就聚合物对无机粒子表面进行包覆改性的原位聚合方法,包括接枝聚合法和乳液聚合法的研究现状进行了综述。
In this paper, the surface graft polymerization of porous membrane in supercritical carbon dioxide (SC CO_2) was proposed to improve the hydrophilic and antifouling properties.
本文提出通过超临界CO_2流体技术对基体膜进行接枝改性,改善基体膜表面亲水性及抗污染性能。
Normal initiators used for graft polymerization of vinyl monomers on starch are reviewed with 21 references. The characterization, initiating mechanism and the application of initiators are discussed.
总结了近年来淀粉与乙烯基单体接枝共聚的常用引发剂,对引发剂的性质、优缺点、引发机理及应用作了评述,引用最新文献21篇。
This paper is related to surface modification of PE films by combining plasma pretreatment with UV-induced graft polymerization, in order to improve the antithrombogenicity of polyethylene (PE) films.
本文采用等离子体和紫外照射接枝技术对医用高分子材料聚乙烯进行表面改性,以提高其抗凝血性能。
There are three ways using plasma technology to modify the surface properties of polymer materials, which are plasma surface treatment, plasma polymerization and plasma graft copolymerization.
运用等离子体技术改变高分子材料的表面性质的方法主要有三类:等离子体处理、等离子体聚合和等离子体接枝聚合。
The water protection ability of polymerization condition and graft polymers is explored to provide basis for the development and application of water protection.
对其聚合条件和接枝共聚物的保水能力进行了研究,为保水剂的开发应用提供依据。
MBS is graft polymers prepared by polymerization of MMA in presence of PBD-styrene rubber emulsion.
MBS是由丁苯橡胶与甲基丙烯酸甲酯经乳液聚合而得的接技聚合物。
The influences of polymerization conditions and hydrolysis conditions on the capacity of water-absorption of graft copolymer were investigated. In addition, two synthetic methods were compared.
考察了聚合条件和水解条件对接枝共聚物吸水能力的影响,并对两种合成方法进行了比较。
The paper reviewed the modification of chitosan by free radical polymerization and atom transfer radical polymerization(ATRP), emphasized the application of ATRP on graft copolymerization of chitosan.
综述了普通自由基聚合和原子转移自由基聚合(ATRP)反应对壳聚糖及其衍生物进行修饰改性的研究现状。着重介绍了ATRP技术在壳聚糖接枝改性方面的应用。
One starch graft acrylamide copolymer was synthesized by graft copolymerization of starch and acrylamide in solution, and the polymerization kinetics and its mechanism was discussed.
采用水溶液聚合法合成了淀粉接枝丙烯酰胺聚合物,研究了聚合反应动力学和聚合反应机理。
Interfacial polymerization was introduced to prepare polyamide porous microcapsules, and plasma-graft pore-filling polymerization was used to graft PNIPAM into the pore of the microcapsule membranes.
实验中采用界面聚合法制备聚酰胺多孔微囊,然后利用等离子体接枝填孔聚合法将PNIPAM接枝在微囊壁的膜孔中。
The process of graft copolymerization was similar to that of classical emulsion polymerization, which can be divided into three stages: nucleation, growth, and polymerization finish.
其反应历程与常规乳液聚合的相似之处是,都经历了乳胶粒子的成核、增长和聚合完成阶段。
The process of graft copolymerization was similar to that of classical emulsion polymerization, which can be divided into three stages: nucleation, growth, and polymerization finish.
其反应历程与常规乳液聚合的相似之处是,都经历了乳胶粒子的成核、增长和聚合完成阶段。
应用推荐