Handle, Hand Wheel, Pull Handle.
手柄，手轮，拉手。
Test auto pilot each watch by hand wheel operation.
每班一次用手操舵检查自动舵。
B lifting, the rope not tied hand wheel or valve stem.
b起吊时，绳子不要系在手轮或阀杆上。
Test auto pilot once each watch by hand wheel operation.
每班一次用手动舵检查自动舵。
Select hand wheel or a hinged presser food to sew the stuff.
选用轮钱或平押脚，来车缝纫物品。
Beneath the hand wheel are two nuts attached to the valve body.
在手轮下面是两个附在阀体上的螺母。
Valve on activated (hand wheel) pneumatic devices to be completed.
阀门启闭靠启动(手轮)气动装置来完成。
The movement and operation mode of hand wheel of CNC lathe were researched.
针对数控车床的手轮移动操作方式进行研究。
Solenoid valve, hand wheel, valve position switch, air filter regulator and so on.
电磁阀、手轮机构、阀位开关、空气过滤减压器等。
Bilateral height can be adjusted, easy to use, easy and simple hand wheel adjustments.
双边高度可以调整，使用方便，手轮调整轻松简单。
Thickness pressure and work pressure can be adjusted by the hand wheel indicated direction.
压片厚度及工作压力均可按手轮指示方向进行调节。
The unique hand wheel handle design allows easy turning of the pot and dumping of materials.
独特的手轮摇柄设计能轻松方便地翻锅和倾倒物料。
This allows the connection to be made without a wrench, using a nut equipped with a hand wheel.
这使得不用扳手，而是使用带手轮的螺母就可以进行连接。
Valves with this option have a hand wheel mounted on top of the actuator for manual valve operation.
配置这种备选件的阀门在执行器顶部安装一个手轮用于手动阀门操作。
Spin the transition hand wheel (No. 2 in Fig. 1), make the system be located at the high power passageway.
旋转转换手轮(图1序号2)，使系统处于高倍通道位置。
Lightweight aluminum frame, fixed armrests, fixed foot care, solid front, pneumatic rear wheel, plastic hand wheel.
铝合金轻型车架，固定扶手，固定脚托，实心前轮，充气后轮，塑料手轮。
It is more ease and high accuracy based on adjustment hand wheel during filling. The filling capacity can be adjustable.
采用灌装量调节手轮，使用更加方便，灌装量精确。灌装速度可随意调节。
The adjustment scale on the hand wheel is adjusted to a suitable position by pressing the button to change needle distance.
变更针距只需按住按钮边把手轮的调节刻度调整到适合的位置。
Hand wheel control any rotation rotate 300 degrees, can be placed at the same time mixing different materials multi-faceted barrels.
手轮控制旋转300度任意回转，可同时搅拌多方位不同摆放的物料桶。
In this paper, the existing problems of hand wheel driving are analyzed, and a new pulse driving uniform control pattern is presented.
本文分析了数控系统手轮驱动存在的问题，提出了全新的手轮脉冲驱动均匀化控制法。
You can not add assistant lever to the hand wheel. Clockwise turn of hand wheel means the closing of valve, otherwise it means opening.
操作时手轮顺时针旋转为阀关，反之为开，不得在手轮上再增加辅助杠杆。
The hand wheel is always in the same position relative to the valve body regardless of whether the valve is in the open or closed position.
不管阀门是在开启或是关闭位置，手轮总是处在相对于阀体的同样的位置。
The hand press is a small press work pressure equipment to use the rotating hand wheel and the drive shaft which joined together with the hand-wheel.
该手动压力机是利用旋转的手轮和与手轮联接在一起的轴来带动压力机进行工作的小型压力设备。
Many applications require gate, globe and stop-check valves to use gearing to reduce the hand wheel rimpull and thus allow one man to manually seat or unseat the valve.
许多实际应用要求闸阀、截止阀和截止止回阀采用齿轮装置来降低手轮的边缘拉力，使得靠一个人的力量就可以启闭阀门。
When a hand wheel is toggled, the nut connecting plate drives the hand piece of the suspended type submerged arc welding machine and a wire reel bracket to move axially.
拨动手轮时，螺母连接板带动悬挂式埋弧焊接机头与焊丝盘支架轴向移动。
When a hand wheel is toggled, the nut connecting plate drives the hand piece of the suspended type submerged arc welding machine and a wire reel bracket to move axially.
拨动手轮时，螺母连接板带动悬挂式埋弧焊接机头与焊丝盘支架轴向移动。
应用推荐