The powder can be directly consolidated into blocks via hot pressing.
这些粉末可以通过热压形成整块。
Our factory has domestic and advanced hot pressing plate production lines.
本厂拥有国内先进的热压板生产流水线。
The epoxy molding compounds (EMC) was prepared by hot pressing molding method.
采用热模压法制备了环氧模塑料（EMC）。
Several graphite samples were made from calcined coke and coal tar by hot pressing.
用煅烧石油焦和煤焦油为基本原料，采用热压工艺制备了几种石墨材料。
The hot pressing correction to the small size sawn timber deformed has been tested in this paper.
对已产生变形的小规格锯材，本文进行了热压校正试验。
Bulk graphite was prepared from calcined coke and coal tar pitch precursors by hot pressing and graphitization.
用煅烧石油焦和煤沥青为基本原料，采用热压和石墨化工艺制备了几种纯石墨材料。
The direct steam curing after the unloading of hot pressing CPB could greatly accelerate thc hydration of cement.
板坯卸出压机后的直接蒸养可大大加速水泥的水化过程。
Bulk graphite was prepared from starting materials of calcined coke and coal tar pitch by the hot pressing process.
以煅后石油焦和煤沥青为基本原料，采用热压工艺制备了一系列石墨材料。
This article describes a hot pressing formation technology to make flanged openings on special jacketed vessel shells.
介绍在特殊夹层压力容器制造中对夹层壳体壁上进行开孔翻边热冲压成形的工艺技术。
The results show that a continuous gradient distribution of Co could be obtained by controlling the hot pressing parameters.
试验结果表明：热压温度、保压时间等工艺参数对梯度合金的热压致密化及梯度组织的形成有着明显的影响；
Bamboo Oriented Strand Board(BOSB), a multi-layer structural board, is made from bamboo strands by oriented forming and hot pressing.
竹定向刨花板（BOSB）是将窄长竹刨花经过施胶、定向铺装和热压而成的一种多层结构板材。
Mullite - cordierite composites with various mullite contents and microstructures were prepared by liquid phase sintering and by hot pressing.
由热压和液相烧结方法制得了具有各种莫来石含量和显微结构的莫来石—堇青石复合体。
The factors are glue spread, hot pressing temperature, environmental concerned flame-retardant spread and hot pressing time in influence sequence.
影响大小次序为脲胶施加量>热压温度>阻燃剂施加量>热压时间。
There are some obviously different points between medium density fiberboard(MDF) hot pressing technology by continuous press and multi opening press.
连续平压法生产MDF与多层压机生产在热压工艺上有着明显的区别。
Timber of Yunnan pine from plantation was treated with hot pressing, water boiling and steaming, the profile density of treated timber was determined.
采用热压、水煮和汽蒸对云南松人工林的云南松材进行了处理，对经处理的云南松材剖面密度进行了测定。
Results show that better microstructures and mechanical properties can be achieved only under suitable hot pressing conditions and the material compositions.
研究表明：只有在合适的热压工艺和组分条件下才能获得良好的微观结构与力学性能。
Finally, the bonding strength of IC resin and wood under hot pressing was tested. The relationship between bonding strength and reaction degree was analyzed.
论文最后对异氰酸酯热压胶接木材的强度与反应程度之间的关系作了初步研究。
The effect of hot pressing sintering temperature, pressure and time on its properties are investigated by means of orthogonality rejection and variance analysis.
采用正交设计和方差分析的方法研究了热压烧结温度、压力、时间对该砂轮性能的影响。
Hot pressing is the key of flakeboard production. During the process it determines the final physical and mechanical properties and the production line capability.
热压是整个刨花板生产的核心环节，该过程不仅形成产品的主要物理力学性能，而且决定着设备生产能力的大小。
This paper describes the application results of Carborundum and cast stone in mineral processing equipment as well as the hot pressing technology for producing them.
本文叙述了绿碳化硅砂、铸石砂在选矿设备中的应用效果以及热压生产工艺。
Function of hydraulic parts comprising the hydraulic system of multi-opening hot press and realization of the hot pressing procedure in MDF production are introduced.
介绍中密度纤维板生产中，热压机液压系统各液压组件的作用及实现热压工艺曲线的过程。
This paper introduces the physical and chemical change of particleboard in the course of hot pressing and analyses the effect of temperature, heating time and pressure.
介绍了刨花板热压过程中板坯的物理变化和化学变化，分析了热压温度、时间、压力在热压过程中的作用，阐明了热压工艺是刨花板生产中产品质量保证的重要环节。
Objective Comparing different seasons sugar-containing infusion hot pressing disinfected after different locations on the same sterilization 5-Qiangjia base furfural content.
目的：比较不同季节含糖输液热压灭菌后同一灭菌车上不同位置5-羟甲基糠醛含量。
Based on fuzzy control theory, the paper analyzed the principle and method to establish fuzzy Controlling model of fiberboard hot pressing machine, and discussed it's application.
基于模糊控制理论，论述了纤维板热压机模糊控制模型的建立原理及其方法，并给出应用实例。
Humidifying treatment of medium density fiberboard (MDF) mat is for the purpose of shortening hot pressing cycle, reducing thickness of pre cured layer and raising quality of MDF.
中密度纤维板板坯表面增湿处理旨在缩短热压周期、减少预固化层厚度、提高产品质量。
But in this shaping installation, besides the mentioned functions, shaping, shoveling, soldering and sealing of the stator coils can be completed at the same time before hot pressing.
传统的线圈成型模只能成型线圈的端部形状，而该装置在此基础上增加了对线圈的预弯、铲头、封焊等功能，在定子线圈热压前一次完成以上各工序。
Many producing methods are developed as the craft improved, including isostatic cool pressing, dry pressing and hot pressing molding, to meet customers' different requirements to technique.
生产工艺的不断改进，已形成多方法制造：冷等静压生产、干压生产、热压注成型生产，可满足了不同用户的技术要求。
The lithium disilicate glass-ceramics and their composites with high relative density were prepared by melting method and hot-pressing technology, respectively.
本文分别采用熔融法和热压烧结工艺制备了致密的二硅酸锂微晶玻璃及其复合材料。
The results reveal that the increase of the sintering temperature and the hot-pressing pressure can promote the formation of cristobalite in the fibrous composites.
结果表明热压烧结温度和压力对复合材料中方石英的析出有着显著的促进作用；
The results reveal that the increase of the sintering temperature and the hot-pressing pressure can promote the formation of cristobalite in the fibrous composites.
结果表明热压烧结温度和压力对复合材料中方石英的析出有着显著的促进作用；
应用推荐