Impeller pump outlet or whether there is a gap in the foreign body.
水泵出水口或者叶轮缝隙中是否有异物。
An in vivo evaluation of left ventricular assist with a self-made impeller pump was performed in calves.
为了对自制叶轮泵作在体评价,在小公牛身上进行左心室辅助实验。
The authors implantable pulsatile impeller pump can assist the circulation of the calves for several months.
我们研制的可植入式搏动流叶轮型人工心脏可辅助试验小牛血液循环数个月。
Impeller pump installed in the Shell 2, 3 and retention in the shaft, the shaft driven directly by the motor.
叶轮安装在泵壳2内,并紧固在泵轴3上,泵轴由电机直接带动。
Flexible impeller pump viscous fluid conveying the key lies in direct proportion to flow rate and pump speed.
挠性叶轮泵输送粘性流体的关键之处在于流速和水泵转速成正比。
Flexible impeller pump is the main advantage of some special occasions it can be installed in the most convenient location;
挠性叶轮泵的主要优点是在某些特殊场合可以把它安装在最方便的位置;
The unique JET SKI watercraft feature of the fully enclosed impeller pump dramatically improved water safety over conventional outboard motors.
独特的喷气滑雪船舶功能的全封闭式叶轮泵,大大改进了传统的舷外马达的饮水安全。
From the performance perspective, the type of impeller and the general efficiency closed impeller or less the same, but the type of impeller pump head curve dropped more.
从性能上讲,该型式叶轮效率高和普通闭式叶轮相差不大,但用该型式叶轮泵扬程曲线较为陡降。
Hemolysis tests were performed to verify the data of simulation. The results revealed that the flow patterns in the stream_lined impeller pump were coincident with the theory of stream_lined design.
研究结果表明,流线型叶轮血泵内的流动模式符合流线型设计理论,与直叶片叶轮血泵相比,它的溶血较小,更符合血液动力学要求。
This pump impeller blades can be adjusted automatically to adapt to speed, fluid viscosity and pressure.
这种泵的叶轮叶片可以自动调节来适应转速、流体粘度和不同压力。
Sprinkler pump shell cracks, or impeller, leaf damage, or seal damage, will affect the degree of vacuum, water pumping, water pressure is too small or the phenomenon.
洒水车水泵泵壳出现裂纹、或者叶轮、倒叶损坏、或者水封破损,都会影响真空度,出现水抽不上来,或者水压过小的现象。
Conducting oil pump prime the pump, pump cover, bearing, bracket, shaft, seals, bearings, impeller of eight large component parts.
导热油泵首要由泵体、泵盖、轴承体、支架、主轴、密封、轴承、叶轮八个年夜的零部件组成。
CAD method for improving design quality and efficiency of centrifugal pump impeller is provided.
本文为提高离心泵叶轮的设计质量及效率提供了一个新的方法。
And then removed the pump shaft shell removed send impeller repair shop repair.
然后将轴拆出泵壳,拆下叶轮送修理厂修理。
The pump comprises mainly of pump body, cover, impeller, shaft, seal ring, intermediate support, sealing and suspension assembly, etc.
泵主要由泵体、泵盖、叶轮、轴、密封环、中间支架、密封和悬架部件等组成。
Basic structure of the centrifugal pump is composed of six parts, namely: impeller, pump, pump shaft, bearing, seal ring, stuffing box.
离心泵的基本构造是由六部分组成的,分别是:叶轮,泵体,泵轴,轴承,密封环,填料函。
The type of the pump impeller and pump and centrifugal pump with a volume effect of particles suspended in mid-stream leaf out of date, do not hit any part of the pump, it is good non-destructive.
该型叶轮的泵兼具有容积泵和离心泵的作用,悬浮性颗粒在叶片中流过时,不撞击泵内任何部位,故无损性好。
The rotor of the PMSM is fixed to the pump impeller of the artificial heart, and is levitated by a magnetic bearing.
电机转子安装在人工心脏泵的叶轮上,并因电磁轴承的作用而悬浮。
PW, PWF mainly by the pump cover, pump casing, impeller, shaft seal, shaft, and bracket the composition of such components.
PWF主要由泵盖、泵壳、叶轮、轴封、轴、和托架等零部件组成。
The pump casing, impeller, motor housing and stationary base elbow shall be manufactured of close-grained cast iron, ASTM A48, Class 30.
泵壳,叶轮,电机壳和固定底座弯头都应该采用符合美国材料试验协会ASTMA48级别30致密铸铁制造。
Pump impeller loose, grinding to pump out the bottom end caps.
水泵叶轮松动,磨到水泵出水底端盖。
The main products are pump, impeller, body, auto parts, textile machinery products, etc.
主要产品有泵壳、叶轮、阀体,汽车零配件,纺织机械产品等。
Single suction, single stage horizontal centrifugal pump with closed impeller.
单吸、单级卧式离心泵,用封闭叶轮。
The problem of cavitation of water pump impeller was solved by means of localized treatment of the sealing ring of circulating pump.
通过采用新技术,对循环水泵密封环进行局部加工,解决了水泵叶轮汽蚀问题;
The hydraulic principles of a pulp pump were discussed and a new understanding for the hydraulic characteristic of pump impeller was proposed.
通过阐述浆泵叶轮的若干原理,提出对浆泵叶轮水力特性的认识,并应用于解决实际问题。
Different models of neural networks were trained to choose the best performance network for pump impeller imbalance fault diagnosis and classification.
选择不同的中枢网络作为最好的网络进行叶轮不平衡故障诊断和分类。
Both lifting design method and quasi-three-dimensional design method has been applied to the design of axial flow pump impeller.
本文分别采用升力法和准三维的方法对轴流泵叶轮进行了设计计算和性能预估。
Both lifting design method and quasi-three-dimensional design method has been applied to the design of axial flow pump impeller.
本文分别采用升力法和准三维的方法对轴流泵叶轮进行了设计计算和性能预估。
应用推荐