Some cases of compressible flow as well as incompressible flow are presented.
分别对可压缩叶栅流场的亚音速和跨音速流动进行了数值模拟计算。
Bifurcations of airfoils with nonlinear pitching stiffness in incompressible flow are investigated.
本文分析了不可压气流中带有非线性俯仰刚度二元机翼的分叉问题。
As in the incompressible flow, the Field and Matter Bicharacteristics of Vortex also have been demonstrated.
如同不可压流动，在可压缩流动中旋涡同样具有场与物质两重特征。
A generalized finite element method (GFEM) is presented for the calculation of incompressible flow in nozzle.
本文将广义有限元法用于求解不可压缩管流。
The runner of water turbine which true fluent is accidental, three-dimensional, viscid and incompressible flow.
水轮机转轮内的真实流动是随机的三维粘性不可压缩湍流。
This paper studies the flutter of a two-dimensional airfoil in the incompressible flow with cubic non-linearity in the plunging direction.
研究了在不可压缩流中具有立方非线性俯仰刚度的二元机翼的颤振问题。
A simple nonlinear wing theory for the low-aspect-ratio rectangular flat plate with large Angle of attack in incompressible flow is developed.
本文系对不可压缩流体中大冲角小展弦比矩形平板机翼提出—个简单的非线性理论。
In the process of investigation, it is assumed that gas flow through the exhaust diffusers is of one dimensional quasi-steady incompressible flow.
在研究过程中，假定排气扩压器的气流为一元准稳定不可压缩气流，试验装置采用压缩气源供气。
The eigenvalue method is presented for determining the effects of blade mistuning and blade-disk on cascade flutter boundaries in incompressible flow.
本文用特征值法研完了叶片频率失调及盘片耦合对叶栅颤振边界的影响。
The projection methods are currently among the most popular methods for solving viscous incompressible flow based on the primitive variable formulations.
目前，在计算非定常不可压缩流动的原始变量形式的数值方法中，投影方法得到了越来越广泛的应用。
A new pressure correction algorithm on collocated grids for incompressible flow is proposed. Pressure correction value is obtained from pressure equation.
本文提出了同位网格上的不可压流动压力修正算法，其中压力修正值由压力方程所求得。
This paper presents the results of the analysis and numerical solution of the three-dimensional turbulent incompressible flow in an S-shaped rectangular duct.
本文给出了矩形截面的s形弯曲管道中气流的三元紊流数学分析和对不可压缩情况进行的数字解结果。研究中将三元粘性紊流看作半抛物线形式。
Under the precondition of incompressible flow, fluid spiral motion in SK static mixer tube was resolved into axial beeline motion and circumferential rotation motion.
在流体不可压缩的假设前提下，将流体在SK型静态混合器中的螺旋形运动分解成轴向直线运动和环向旋转运动。
The results obtained from this numerical experiment may be of some universal significance for the treatment of rigid wall boundary conditions of viscous incompressible flow.
本文数值实验中的一些结果对粘性不可压缩流固壁数值边界条件的处理可能具有一定的普遍意义。
Firstly, a new total pressure equation of the viscous incompressible flow is introduced in this paper. Then, this equation is numerically computed by use of the implicit method.
本文首先导出粘性不可压缩流动的新的总压方程，然后采用隐式方法对该总压方程进行数值计算。
The forebody, suspension lines and canopy were modeled as a series of elastically connected mass nodes. The flow field inside the canopy was two-dimensional inviscid, incompressible flow.
前体、伞绳及伞衣离散为一系列弹性连接的质量节点，伞衣内部流场为二维无粘、不可压流。
The flow characteristics of inner flow field of turbine are computed with three-dimension incompressible continuous equation, momentum equation and turbulent kinetic-dissipation equation.
采用三维不可压紊流的连续方程与动量方程和紊动能与耗散率方程对内部流场进行研究计算。
The fluid mechanics equations of one-dimensional incompressible unsteady flow are adopted in whole low-speed turbo-compression system.
本文将一维非定常不可压流体力学方程组，应用于整个低速透平压缩机系统。
The stream function-vorticity method has been used to simulate two-dimensional transient state of incompressible viscous flow.
采用流函数-涡量法对粘性不可压缩流体的二维瞬态流动进行模拟计算。
We will consider first the case of two-dimensional incompressible steady flow through orthotropic soil.
我们首先考虑二维不可压缩流体通过正交各向异性土层的定常流动。
The modeling for three-dimensional incompressible viscous non-isothermal steady flow was presented by using penalty finite element method.
针对幂律型流体，建立了稳态三维粘性不可压缩流体非等温流动的有限元模型。
The authors make basic research for the numerical calculation of cooling waters flow in the engines, on the bases of research results obtained with numerical method of incompressible fluid.
本文在作者已完成的不可压缩流体三维流动数值模拟研究的基础上，对发动机冷却水三维流动的数值模拟方法进行了基础性研究。
For incompressible boundary layer or plane channel flow, typical three-dimensional structures would appear.
对不可压缩边界层或平面槽道流，还会出现典型的三维结构。
Such as: the balance of elastic membrane, the heat conduction of stationary state, the incompressible potential flow, the problem of electrostatic field and magnetostatics field.
例如：弹性膜的平衡问题，稳定状态的热传导问题，不可压缩势流问题，静电场问题以及静磁场问题。
A three dimensional incompressible gas-liquid two-phase flow model was proposed to accurately simulate the fluid flow of casting's mould filling process.
为了更精确地模拟铸造充型过程的流动行为，建立了充型过程的三维不可压缩气。液两相流动模型。
Based on the unsteady potential flow theory of incompressible liquid, a model of water-entry impact force for air-launched mine was presented, and the water-entry impact force was calculated.
基于不可压缩流体的非定常势流理论建立了空投水雷入水冲击力计算的数学模型，对水雷的入水冲击力进行了计算。
Making use of these results, we obtained an exact solution for the incompressible potential flow through a two-dimensional Laval nozzle.
利用这些结果得到了二元拉伐尔喷管内不可压缩位势流动的精确解。
Using incompressible MHD equations and zero equation turbulent model, the paper calculated the flow field in two dimension thin slab continuous casting mould with the electromagnetic brake(EMBR).
本文采用不可压缩MHD方程及零方程湍流模式，数值计算了加电磁制动器的二维薄板坯连铸结晶器中的流场。
Steady-state heat flow is comparable to the flow of an incompressible fluid.
稳态热流和不可压缩流体的流动可相比拟。
This paper presents a new numerical method for calculating steady incompressible viscous flow around bodies of revolution.
本文提出了一种计算回转体定常。不可压缩粘性绕流问题的新数值方法。
应用推荐