They pump water down an injection Wells (the blue well), where it is heated by the rock.
他们把水压入注水井(蓝井)下，在井里，岩石把水加热。
An injection well used to dispose of the oilfield brine that is often produced with oil.
处置常与油一同采出的油田盐水所用的注入井。
The paper introduces the design for meticulous filter of injection well head in oil field.
介绍了井口精细过滤器滤芯的设计。
Casing damage during blowout of water injection well is common in many oil fields of China.
注水井放喷过程中的套管损坏问题在中国许多油田十分普遍。
Direct-viewing reflects in the oil deposit the fluid between the injection well and the development well path.
曲观反映出油藏外流体反在注入井和出产井之间的活动轨迹。'）；
Tests at production well and injection well showed that magnetization improved the acidizing operation result.
在首次进行的生产性试验中，取得了良好效果。
In order to solve these problems, the paper has discussed the injection-production relationship based on injection well.
为了解决这些难题本文首次提出了以注水井为研究对象的注采关联性问题。
Pressing crack is one of important means for increasing oil and gas well production and water injection of injection well.
水力压裂是油气井增产、注水井增注的一项重要措施。
Some analysis examples of oil and water well test are given to show the necessary for analyzing water injection well test data.
文中列举出油水井对应测试的分析实例，以此说明加强低渗透油藏注水井压力动态分析的必要性。
The well S1-1 is a water injection well, which has the characteristic-close pressure between liquid column and formation leakage.
1井是具有钻进时液柱压力与地层漏失压力相接近特点的一口注水井。
Intelligent linkage adjusting system for separating injection well is a new system which contains testing and adjusting operation.
注水井分层智能联动调配系统是一种集测、调试为一体的新型注水调配系统。
Plugging large pore in water injection well is the most important measures, and choice of plugging agent is getting more important.
封堵注水井的大孔道是控水稳油的重要措施，封堵剂的选择也越来越重要。
This zone has the features of poor property, poor communication and low energy, and pressure is not affected by water injection well.
其特点是物性差、连通性差、能量小和压力不受注水井影响。
A type of fire flood, an enhanced oil recovery method, in which the burning front moves from the injection well toward the producing well.
强化采油方法中的火驱法的一种类型。这时燃烧前缘从注入井向生产井移动。
Forward combustion is in contrast to reverse combustion in which the burning front moves from the producing well toward the injection well.
与其相反的是反向燃烧，反向燃烧时燃烧前缘从生产井向注入井移动。
Field procedures of profile control disposal by Xanthan gum in water injection well are described and profile control results are analyzed.
文中着重叙述了黄原胶在枣园油田注水井调剖处理的现场施工简况，并对调剖效果进行分析。
Perforation is the last step of well completion, so injection well perforation completion has great influence on water absorbing capability.
射孔是完井工艺最后的一个环节，因此注水井射孔完井的优劣对其吸水能力的影响就显得十分重要。
Real water injection rate in water injection well will change when system pressure fluctuates or formation water absorption capacity changes.
注水井实际注水量随系统压力波动或地层吸水能力的变化而改变，这是针型阀或井下固定水嘴无法避免的缺陷。
Though a lot of laboratory tests, it confirms that the technique of use oily sludge to the profile control of the injection well is feasible.
通过大量室内实验证实，利用含油污泥对注水井进行调剖的技术是可行的。
With the popular application of self-loop well-flushing truck in water-injection well, how to properly use it becomes more and more important.
随着油田注水井自循环洗井车在各油田的推广使用，如何正确使用油田注水井自循环洗井车显得越来越重要。
An apparatus for testing the pressure drop of the water injection well is developed according to the actual requirement of oil field production.
针对油田注水生产的需要研制了注水井注水压降测试装置。
Therefore, there is an urgent need of the survey on offshore injection well plugging, less injection mechanism and Broken Down injection technology.
因此，迫切需要对海上注聚井的欠注、堵塞机理以及解堵增注技术进行研究。
In the actual application, sequential response value of steam quality is measured under steam injection well with high temperature and high pressure.
在初步的实际应用中，得到了注汽油井井下高温高压蒸汽干度变化的连续响应值。
Pressure transient test in steam injection well is an inexpensive and effective means to determine swept volume and flowing condition of the steam zone.
注蒸汽井压力降落试并是确定蒸汽波及体积和了解波及区流动情况的一种经济、有效的方法。
The soft sealing isolation technology is suitable for casing deformation well, corrosion control of commingled injection well and isolating injection water.
该软封具有施工简单、隔离性能好、有效期长和可用于套管变形井等特点，适用于合注井的防腐保护液与注入水隔离。
Water-injection system contain headwaters, water-injection station, water distributing station, injection well head, injection well site and water injection line.
注水系统包括水源、注水站、配水间、注水井口、注水井场及注水管道六部分。
It solved the difficult problems of thermal insulation or separate steam injection in general steam injection well, separate steam injection well, and side track well.
它解决了普通注汽井、分层注汽井和侧钻井的隔热或分层注汽的难题。
For the indoor lab experiments, in ground condition, the polymer injection process and the formation process are to study the extent and scope of SZ36-1 injection well plugging.
在实验室条件下，模拟了聚合物注入现场情况以及垢样生成过程，研究了SZ36 - 1注聚井注入堵塞程度和范围。
For the indoor lab experiments, in ground condition, the polymer injection process and the formation process are to study the extent and scope of SZ36-1 injection well plugging.
在实验室条件下，模拟了聚合物注入现场情况以及垢样生成过程，研究了SZ36 - 1注聚井注入堵塞程度和范围。
应用推荐