A new type uf involute gear is Presented.
提出了一种新型渐开线齿轮。
At last, the result of the involute gear driving design is described.
最后给出了渐开线齿轮传动设计的计算结果实例。
This paper advanced a practical and succinct formula for tooth number choice of involute gear.
从等强度概念出发，推出一个据以选取渐开线齿轮齿数的简单、实用公式。
The performance comparative tests are done within involute gear and gear with meshed medium belt.
在试验台上进行了带式啮合介质齿轮与渐开线齿轮减速器整机啮合性能对比试验。
Method is introduced to design involute gear and cycloid gear with 2d CAD software and graphic method.
介绍用二维CAD软件作图法设计渐开线齿轮、摆线齿轮的方法。
On the base of principle of involute gear and its property, the formation of tooth surface are introduced.
根据渐开线齿轮的原理和渐开线的基本性质，介绍渐开线齿轮齿廓的形成。
The finger milling-cutter templet of involute gear is the assistant tool mostly to machining big module gear.
齿轮指形铣刀样板是加工大模数齿轮的主要辅助工具。
To model involute gears accurately, a formula for calculating the involute curve of gear profile is presented.
为解决渐开线齿轮的精确造型问题，提出了齿廓渐开线曲线的计算公式。
A thorough study for the mechanism of the involute gear lapping with dynamic force was made in theory and test.
对渐开线齿轮动态力研齿机理进行了理论分析和实验研究。
In this paper, an approximate method of using three tangent arcs to substitute the involute gear profile curve is put forward.
提出用圆弧来代替渐开线齿形的近似方法，实现了渐开线齿轮三维实体造型的直接编程生成技术。
The paper presents a new approach to the development of RV transmission mechanism by replacing cycloid gear with involute gear.
探讨用渐开线齿轮取代内外摆线齿轮实现RV传动的新途径。
The dynamic contact finite element models of standard involute gear and modification gear are established in the software of ANSYS.
在ANSYS软件中建立了标准渐开线齿轮与修形齿轮的动力接触有限元模型。
In practically, it proofs that this method has reference value for drawing involute gear in other CAD further development platforms.
实践证明该方法为其它CAD二次开发平台绘画渐开线齿轮提供可借鉴之处。
This approach can improve modeling precision and efficiency of producing involute gear, and provide necessary condition for finite element...
该方法可以提高渐开线齿轮造型精度与效率，从而为渐开线齿轮的有限元分析提供了必要条件。
Comparing with involute gear pump, the instant displacement is in direct proportion to the angular velocity of the gear and stable without pulsation.
对比渐开线齿轮泵，单圆弧齿轮泵的瞬时排量与齿轮角速度成正比，且稳定，无脉动。
The article expatiates on calculation of both involute and transitional parts of gear profile of the finger-type milling cutter for processing involute gear.
本文阐述了加工渐开线齿轮的指形铣刀齿形渐开线部分及其过渡曲线部分进行的计算方法。
Early in 1971, we installed an experimental single circular-arc-profile gear in a 2400Hp pass- enger-cargo ship instead of an involute gear for the first time.
1971年起，我们首先在2400马力客货轮中采用单圆弧齿轮（不必磨齿）代替渐开线齿轮，使用到现在情况良好。
The results are compared to those of the standard involute gear and proof that the bending strength of the composite profile tooth is higher than that of involute one.
结果表明，复合齿形齿轮比渐开线齿形齿轮具有更高的弯曲强度。
According to the requirements for the involute gear and powder metallurgy theory, the present article gives a principle and method for designing die cave and structure.
根据渐开线齿轮的基础知识及粉末压制烧结理论确定了设计模具型腔及结构的原理和方法。
The feasibility of the CWR forming of involute gear-shaft is analyzed and the hypothesis of the kinematically admissible velocity field in the wedging zone is verified.
同时对渐开线齿轮轴楔横轧成形的可行性进行了分析，对成形区的动可容速度场假设进行了验证。
This approach can improve modeling precision and efficiency of producing involute gear, and provide necessary condition for finite element method analysis of involute gear.
该方法可以提高渐开线齿轮造型精度与效率，从而为渐开线齿轮的有限元分析提供了必要条件。
The result will offer reference data for design of involute gear and optimization of parameter choice, and offer new mathematical model for numerical analysis of root stress.
其计算结果将为渐开线齿轮设计、参数优化选择等提供参考数据，同时为齿根应力数值分析提供了新的数学模型。
Prof. Zhang holds that double involute gear with ladder-shaped teeth possesses the advantages of good technology, high bending strength, high contact strength and fewer teeth.
张光辉教授认为：分阶式双渐开线齿轮具有良好的工艺性能、弯曲强度和接触强度高、最少齿数小等优点。
There is no common normal in the conical involute gear and the fixed chordal tooth thickness can not be measured accurately because of the coexistence of helix angle and taper.
渐开线锥形齿轮由于同时存在锥度和螺旋角，使得其固定弦齿厚无法精确测量，也没有公法线。
Aimed at a kind of rotary cutting machine, the machining process of involute gear chamfering is kinematically analyzed, and the moving locus equations of cutting edge are deduced.
针对一种目前国内研究较少的回转切削机床，分析了对渐开线齿轮进行倒角加工时的运动情况，得出了该机床在进行倒角加工时刀具切削刃的轨迹方程。
Firstly, the performance of several kinds of gears that is commonly used in present is analyzed. the sliding coefficients of the involute gear and the cycloidal gear are compared.
论文首先对目前常用的几种齿轮性能进行了分析，比较了渐开线与摆线齿轮的滑动系数，渐开线与圆弧齿轮的弯曲应力和接触应力。
By using geometry analysis method, this paper educed calculation formula of normal direction gear side clearance when internal gearing involute gear transmission center distance waned slightly.
通过几何分析的方法，导出了内啮合渐开线齿轮传动中心距略变小时，法向齿侧间隙的计算公式，供齿轮传动设计计算之用。
The transmission part is an involute gear, and the working part can adopt different working faces, such as a cylinder excircle face, a circular arc tooth or an involutes tooth gear top cavetto.
传动部分是渐开线齿轮，工作部分可采用不同的工作面，如圆柱外圆面或圆弧形齿或渐开线齿轮齿顶修圆。
Comparing with involute gear pumps, circular tooth gear pumps have following characteristics: compact structure, no pulsation, stable rotation, high efficiency, low noise, and long working life.
与渐开线齿轮泵相比，圆弧齿轮泵的特点是：体积小、无脉动、转动平稳、效率高、噪声低以及寿命长等。
Comparing with involute gear pumps, circular tooth gear pumps have following characteristics: compact structure, no pulsation, stable rotation, high efficiency, low noise, and long working life.
与渐开线齿轮泵相比，圆弧齿轮泵的特点是：体积小、无脉动、转动平稳、效率高、噪声低以及寿命长等。
应用推荐